Horizontal board sorting line

Almab

Condition: new, Year of construction: 2026, MOULDER INFEED IF-100 MAX FEED SPEED 100M/MIN MAX LENGTH 6100MM MIN LENGTH 1500MM FLAT CHAIN CROSS FEED WITH 5 CHAINS INVERTER DRIVE ACCELERATOR 5KW MAX WIDTH 250MM MIN WIDTH 50MM MAX THICKNESS 100MM MINIMUM THICKNESS 12MM 4X FEED ROLLERS 180MM MOULDER OUTFEED OF-100 DROP LEAF OUTFEED CAPABLE OF HANDLING ALL SIZES AS PER IF-100 INFEED CROSS FEED TABLE WITH 7X BELTS SUITABLE FOR UP TO 100M/MIN AVAILABLE EX STOCK Djdpfx Acjy Hcaas Heci PRICE INCLUDES INFEED AND OUTFEED POSSIBLE TO OFFER SUITABLE MOULDER AS NEEDED, WEINIG OR LEADERMAC !!!

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, 1 overhauled splinter separator Paul, 2-lamella, fixed lamella on the right, movable lamella on the left (for left-hand machine) Dedpfxjtx A Sxj Ac Hsci Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm for max. timber length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings Movable slat mounted on 4 ball-bearing supports for easy movement with new roller chain and 11 new idler wheels. Sturdy sheet metal lining between all rollers as good as new condition

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and cross-cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Boards are transported laterally using a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm inclined - Alignment roller section - Chain cross conveyor as a layer former - Star infeed and inspection unit before the trimmer - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (seated) at the joystick assesses: without re-trimming, 5000 mm into stacking machine 1, alternatively: without re-trimming, 4000 mm into stacking machine 1 with re-trimming, 4000 mm into stacking machine 2 with re-trimming, 3000 mm into stacking machine 2 with re-trimming of short lengths for discharge into a box with re-trimming of short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut – cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of finished packages and onward transport to the automatic strapping station Dodsy Uzldspfx Ac Hsci - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 – ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee was able to produce, package, and strap approximately 15,000 boards of size 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping unit has already been dismantled. The system is therefore immediately available. It is very robustly built and has always operated smoothly and without any problems.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers Dcodsy Uzhfopfx Ac Hoi For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: used, Year of construction: 2019, MAXIMUM CHIPPER DIAMETER: 250 MM ENGINE POWER: 75 kW GRINDING DRUM WIDTH: 640 MM Dodpfxjyffi To Ac Hjci GRINDING ROLLER DIAMETER: 660 MM UPPER ROLLER WIDTH: 640 MM MAXIMUM OPENING OF UPPER ROLLER: 600 MM KNIVES ON MACHINE: 3 FEED ROLLERS: 2

Condition: refurbished (used), Stacker for boards and planks manufactured by Almab. Packing machine Dodpfjpguk Iex Ac Hoci

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Sorting line for green sawn timber, 4 horizontal sorting pockets, 4 buffer pockets, trimmer, stacker, operating system Nolyx new in 2018, sorting speed 16000 pcs in 8 hours shift Dcodpfx Acstxzhls Hoi

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction - 4 pairs of main log drive wheels - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts - Hydraulic lowering of the milling head Dedsxx Am Ujpfx Ac Hsci - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW - With HBC radio remote control

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max feeding speed 200 m/min • Electronic speed control 30 - 200 m/min • Max working width 250 mm • Minimum working height 12 mm • Max working height 100 mm • Spindle speed 5000 & 6000 r.p.m • Spindle diameter 50 mm. For a separate fee, it can be dismantled and loaded onto a transport vehicle. Dedpfxjyzdtko Ac Hoci

Year of construction: 1996, condition: used, functionality: fully functional, For sale: Timber sorting and packing line. Visual sorting with end-trimming capability. Includes six quality sorting belt bins. Available for purchase in parts. Dcjdpfx Ajy Edbpoc Hji

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min Dcedextwwkjpfx Ac Hsi 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, Board packer Almab Dedsymbpfspfx Ac Hoci Board feed hills Board pack feed conveyors Board pack output conveyors

Condition: refurbished (used), Dry board sorting line - dry board sorting line - 20 pockets - belt - automatic spacer collection - Trimmer Almab with 16 saw blades - automation- TG automation, Sweden Sorting - Dynalyse MC Pro 2400 System - marking/printer - Alpha Dot Merlyn 350 Dedpfxevzqcyj Ac Hoci - Drum chipper Erjo 204 MA - stacker Almab with 9 cassettes - Pack press

Condition: new, Length: 2,600 mm / Cross-section: approx. 150 x 260 mm New oak sill We offer a new oak sill for sale here. Shipping costs upon request! The scope of delivery includes: 1x NEW oak sill made of sessile oak (Quercus cerris) Length: approx. 2600 mm Height: approx. 150 mm Width: approx. 260 mm Djdpfxjcmculo Ac Hoci Weight per piece: approx. 110 kg Individual tree bark edges may be present. We are available to answer any questions you may have.