Tank

Alfa Laval 10398

Condition: excellent (used), Bacterial removing separator - Bactofuge Manufacturer: Alfa Laval Type: MRPX 418SGV-34C Ncjdpfxoxpu Hns Apvet Capacity: 13,000 l/h Control panel included.

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar Njdpfx Asvhctwspvjct - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Nsdpsim R A Iefx Apvsct

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Nsdpfsk Nm Nrjx Apvjct

Year of construction: 2015, condition: used, Steven single shot depositor 100L stainless hopper, adjustable fill size on mobile stainless frame Ncodpfx Apedbqzdovst

Condition: excellent (used), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Alfa laval CHPX510SGD-35CGRX separator complete system including engine Valve rig Control cabinet Ncedjucct Ijpfx Apvjt Starter cabinet Solids pump Cyclone Sludge tank Foundation plate Vibration damping feet Tools for bowl Compression tool Inert gas system Documentation Previosly used by alfa laval for training

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. Ncjdpfsx S Ipwsx Apvot - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Nodpfx Apjnxk Ixevoct

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: in the standard version the label is folded and glued together with the inserted thread. Optionally, a heat-sealing module is available for this production step. Method for attaching the thread to tea bags: by heat sealing into the tea bag edge. Grouped bag output either counted individually or in an erected box (optional). - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 10cm³; tea bag dimensions LxW: 65x62.5 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-20g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 82x75 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 28x24 mm; thread length: 220 mm; power supply: 220/380V; power consumption: 2.5W; machine dimensions LxWxH: 1688x1330x2205 mm; weight: 1210kg. Nsdpov Nm Smsfx Apvsct

Condition: new, Year of construction: 2025, Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the automatic lid capping machine. The positioning and closing of the lids are fully automatic. - Specifications: filling range: 30-3000ml; number of filling heads: 2; max. speed of the machine in neutral: 50 cycles/minute; SUS304, product contact parts from SUS3316; dimensions and weight of the packaging system depending on the final layout. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ncodpev Nk R Hsfx Apvjt