Akira Seiki RMV 700 APC

Akira Seiki RMV 700 APC

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Pgodpfozwvqkjx Al Ror Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Technical data: Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Pgsdpowu Du Ijfx Al Rsr Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Pjdpfov Tctuox Al Rjgr

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, Description – General: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical data: Control system: Fanuc 21i-T Swinging diameter: approx. 210 mm Pgjdpfotpu Szjx Al Rjr Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have a live tool. Hinged belt chip conveyor Spindle mount: GR. 5 Rotating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: - The machine was completely disassembled, cleaned, and repainted. - The main spindle was fitted with new bearings. - The guides and guide shoes in the X-axis and Z-axis were replaced. - The ball screw in the X-axis and Z-axis was replaced. - New unit for central lubrication and new hoses. - The hydraulic unit was inspected and serviced. The drive coupling between the motor and pump was replaced. - The cooling unit was inspected and serviced; the temperature difference controller was replaced. - The clamping cylinder was fitted with new bearings and seals. - The gearbox of the A-axis was fitted with new bearings, and the coupling between the motor and gearbox was replaced. - The electrical cabinet was cleaned. - The control panel was replaced. - New screen. - New internal lighting. - The turret was disassembled, wear parts were inspected, cleaned, and re-sealed. - The turret encoder and encoder wheel were cleaned. - The length measuring systems in the X-axis and Z-axis were disassembled and cleaned. - The springs of the pickup station were replaced. - The motors of the X-axis and Z-axis were checked for bearing damage. - The panes on the work door were replaced. - The chip conveyor was completely disassembled, fitted with new bearings, cleaned, and painted. - Various small parts on the machine were also replaced, of course. The product has been described by us with the utmost care. The description is non-binding and should be verified during an inspection.

Condition: excellent (used), Year of construction: 2000, Two Hermle C 800 V machining centres for sale. Hermle C 800 V Year of manufacture: 2000 Control: Heidenhain TNC 430 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table clamping surface: 1000 x 560 mm Max. table load: 1000 kg Distance spindle/table: 100–500 mm Spindle speed: 8000 rpm Pjdpfeylkzzjx Al Rjgr SK40 30 tool changer positions

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min Pgedpfowh Dlmjx Al Rer tool length: 210 mm CBN *

Condition: good (used), functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale used Mori Seiki NHX5000 horizontal machining centre in excellent condition. Model: NHX-5000/40 Year: 2012 Pgjdpfjuf S Rzox Al Rsr The machine is available on site by prior arrangement. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Travel X-axis: 1,050 mm Travel Y-axis: 920 mm Travel Z-axis: 990 mm Distance pallet surface to spindle center: 75 - 995 mm Pgodpfsy Nkphox Al Rsr Distance between pallet center and spindle head: 150 - 1,140 mm Pallet size: 630 x 630 mm Max. table load: 1,200 kg Spindle speed: 45 - 15,000 rpm Tool holder: HSK 100 Tool stations: 60 Max. tool weight: 20 kg

Condition: used, Year of construction: 2013, x-travel 30000 mm y-travel 3600 mm z-travel 1900 mm Control Heidenhain type TNC 530 i turning speeds 4000 U/min conus taper DIN 69871+AD mm Feed 10000 mm/min spindle drive 46 kW Rapid movement 25000 mm/min chip conveyor 2 St. Plate area 31000x2500 mm total power requirement 85 kW Soraluce No. 5619 Load hours 9332 On-time hours 27960 Panel array consists of: 1 panel 7000x2500 mm 4 panels 6000x2500 mm Optional: 4x clamping angles Tool package Clamping table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Podpfxeyqtnne Al Rjgr More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2005, condition: ready for operation (used), A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment. Pgodsxtpq Aspfx Al Rer