Used welding machinery for sale (32)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Blodpfoyqr Sxjx Ab Ijf

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Welding and cleaning line consisting of: double-head welding machine, automatic moving table, CNC cleaning machine. Blsdpfx Aeywcv Nsb Ief

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, 3x VE20 Microbond SCI 3x New Bledpsr Rdd Nsfx Ab Ief The parts have been in operation for approximately 200-300 hours. The MICROBOND CSI system, consisting of a feed unit, control system, and high-performance generator, guarantees consistent welding quality. Robust yet highly precise mechanics enable constant gap control thanks to the patented MicrogapControl gap control system. The MICROBOND control system controls and visualizes this continuous joining process. Constant amplitude output and high continuous sound power enable process speeds of up to 800 m/min.

Year of construction: 1999, condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: N SERIE: 99 1220, Hot air Polypropylene box seam welder. Manually fed polypropylene welding machine. Bsdpfjw Elrpsx Ab Ijlf

Year of construction: 2007, operating hours: 9,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 56127, Glazing bead cutting for PVC window frames, with simultaneous pair cutting, including right-side metric stop. Bedpfx Aoyq Rkmob Iolf

Year of construction: 2007, operating hours: 800 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 01277, Perfect machine, a tiltable head for out-of-square welds 0 - 90° Bjdeyq N D Sepfx Ab Ijlf

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Bodsylpqbjpfx Ab Ijlf

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heater Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable Heating Plate Area: Width 600 mm x Depth 400 mm Maximum Part Dimensions: - Max. Part Width: 620 mm - Max. Part Depth: 420 mm - Max. Upper Part Height: 350 mm - Max. Lower Part Height: 350 mm (Combinations of part heights possible, depending on contour) - Max. Working Temperature for contact process: 400°C The machine's modular frame structure enables easy retrofitting and conversions. Side doors and the front door in the welding area are easy to open (for simple retooling). The automatic safety lift door ensures high operator safety. Temperature controllers on the operator panel are equipped with actual/target value displays. The operator panel is a Siemens PLC unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements feature temperature sensors for temperature regulation and act as a safety shut-off in case of overheating. Locating pin systems on the tool clamping surfaces enable reproducible receptacle positions. Advantages of Heater Element Welding Technology: - Secure welding of parts with thin or varying wall thicknesses is possible - Low rejection rate due to precise and reproducible weld joints - Thanks to precise time control, temperature control, and force dosing, even sensitive parts can be welded - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility should be checked) Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Nominal current: 20 A - Required supply cable cross-section: 5 (supply cables) each 6 mm² - Required pneumatic connection: 6 bar Machine Dimensions: - Machine width approx. 1.22 m Bsdpfxoykvdls Ab Islf - Machine width incl. operator panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth incl. operator panel approx. 2.6 m - Machine height approx. 2.4 m - Machine height with raised safety door approx. 2.85 m (door open) Weight: Approx. 2.2 t

Year of construction: 2007, condition: used, welding machine KVT MT 01-HAT SO, with Rotary table, year: 2007 - 0 working hours, price: 8.800 €, contact: Mr. Rainer Eckerle Bodscquugopfx Ab Ijlf

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. This machine welds two corners simultaneously in one operation and is suitable for variable angles from 60° to 180°. Thanks to its highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints – suitable for both white and colored profiles. Key Features: • Simultaneous welding of two corners • Variable welding options between 60° – 180° • Can also be used as a single-head welding machine • 0.2 mm weld seam limitation (for white and colored profiles) • Manual positioning of the movable head • Pneumatic braking system for stable fixation • Individually adjustable heating, temperature, and time parameters • Digital touchscreen control panel • Special heating plates for uniform heat distribution • Easy cleaning system for the heating plates • Durable Teflon system for extended service life • Specially designed jig system for more efficient operations Bljdpfx Ajykkx Djb Isf Application The Schtec WD 720 is ideal for medium-sized production companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high weld quality makes this machine suitable for series production of window frames.

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Bjdpfx Absyimqwe Ielf Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Föhrenbach Laser Welding System Furthermore, I would like to inform you that the laser has been stored for shipping in 2 wooden crates. Bjdpjxbcwxsfx Ab Iolf Data sheets are available as PDF files. Complete data package (4 folders). As previously mentioned, since this is a "custom machine," there are no off-the-shelf solutions here.

Year of construction: 2008, condition: ready for operation (used), Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used. Bledpfx Abjlp N Eye Isf

Condition: ready for operation (used), There are two identical machines available, including documentation. Bjdem Rg R Aspfx Ab Ielf

Condition: ready for operation (used), A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading. Bedpfx Aow I E Disb Ielf

Year of construction: 2014, condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Blodpfsuy T Nqsx Ab Ijf

Year of construction: 2018, condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Bodpfx Aetp Naceb Ijlf

Year of construction: 2009, condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Bsdpfx Asuy T I Hjb Islf

Year of construction: 2010, condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Bsdpfx Abjuy T Ndo Ijlf

Year of construction: 2007, condition: ready for operation (used), A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible. Blsdpewal H Nofx Ab Isf

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Bedsviv Azepfx Ab Ijlf

Year of construction: 2013, condition: excellent (used), Ultrasonic welding system Manufacturer: KLN Bledpfx Abovxppaj Ief Stock number: Year of manufacture: 2013 or 2009 Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Emerson Branson Ultrasonic Generator / Power Supply Manufacturer: Emerson Branson Model: DCX 4000 H01 Device type: Industrial ultrasonic generator / power supply Ultrasonic frequency: 20–24 kHz Maximum output power: 4,000 W (4 kW) Power supply: 200–240 V AC Application: Industrial ultrasonic welding (e.g. plastics, thin metals) Function: Power supply and control unit for ultrasonic transducers / sonotrodes Year of manufacture: 01/2022 Industrial-grade design, CE compliant Function tested Good condition Bljdjya Ap Hjpfx Ab Ief Connection cables included

Year of construction: 2025, condition: new, functionality: fully functional, High frequency generator Schirmacher HS25000 The HF generator is used to generate a high-frequency electromagnetic field, which in a connected HF production device can be used to Blodpfxex U Trpj Ab Isf - Heat and weld thermoplastic plastics, - Dry paper products, textiles, wood and similar materials, - Heat plastic granulates, rubber and other materials. Technical data Operating frequency: 27,12 MHz Output power: 25 kW Power supply: 3 x 400V, 50Hz, Rated power 46 kVA Control: Generator: SPS Siemens S7 / Control electronics: SE68 Triode: RS3026 CL, alternatively ITL 12-1 Anode voltage: Full load 9,1kV, no load 10,4 kV Anode current: Full load 3.800 mA, no load 800 mA dimensions (WxDxH): 1.200 x 1.200 x 2.000mm Commerical infromation Condition: new machine, from delivery stock – zero operating hours Manufacturer: Heinz Schirmacher GmbH, Trittau Availability: Available from stock, more than one unit in inventory Warranty: Available upon request Machine highlights Fast commissioning through modular design – flexible integration into various production processes and adaptation to different tools. Highly precise control – exact power delivery and consistently high welding quality. Highly dynamic HF regulation prevents extremely rapid flashovers in the welding process. Electrode protection – integrated into the generator to safeguard both machine and tool. Automation-ready – suitable for use in automated manufacturing processes with the capability to integrate into existing systems. Visits possible by arrangement.

Condition: used, functionality: fully functional, The Terumo SCD IIB Sterile Tubing Welder, P/N 72508 provides reliable, high-quality welds for sterile tubing connections, completes a weld cycle in 30 seconds, is compact and portable, requires minimal technical training and can be implemented seamlessly into existing processes. Tubing requirements: Polyvinyl chloride (PVC) tubing with a nominal outer diameter of 5.46 mm (0.215 inch) and a wall thickness of 0.84 mm (0.033 inch) or C-Flex tubing with a nominal outer diameter of 6.35 mm (0.25 inch and a nominal inner diameter of 3.18 mm (0.125 inch). Good working condition. Please check out our other listings as well. Bledpfouyu N Ejx Ab Isf