Used single shaft shredders for sale (159)

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Isdpou Thabefx Adnea Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Voltage: 400 V / 50 HzFeed opening: 600 x 800 mmHopper capacity: 0.6 m³Throughput: material and sieve-dependentRotor diameter: 252 mmRotor length: 600 mmRotor speed: 60 - 100 rpmMotor power: 18.5 kWCutting system: 28 knives 40x40 mm (incl. 2nd row of knives)Sieve perforation: 20/25 mmSuction nozzle: 160 mmDimensions: L = 1.800 mm, W =1,230 mmH = 1,640 mmWeight: approx. 1,300 kgincl.:- automatic star-delta start- electronic control cabinet, fully wired- automatic stop at idle- CE-compliant- GS mark "dust-tested"- vibration-damping machine feet- 2nd row of knives = 14 knives 40x40mm Iedpfxovyuphe Adnea

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF Ijdpfx Asxlm Trodnja This machine is still in operation and will be available on October 20th. For more information, please contact us.

Condition: excellent (used), Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Ijdpjxdb S Tsfx Adnja Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: used, machine/vehicle number: 13298, Rotor diameter: 750 mm Rotor width: 1500 mm Iedpfx Adswqyh Aenea Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, overall weight: 1,250 kg, rotor length: 550 mm, power: 18.5 kW (25.15 HP), We are offering our test unit with one shaft shredder and snail conveyor for discharging the material. Ijdpfx Ajwy Nh Rsdnoa

Condition: used, Year of construction: 1996, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 75 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. new Rotor knife shape: 43x43x19.5 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Iedpfewtbyxjx Adnoa Hydraulic unit: complete Hydraulic cylinder sieve cassette: screens 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. Iedpfxexftito Adnoa It is still in place and runnning. Buyer to decommision and collect. This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine

Condition: ready for operation (used), Shredder with diesel engine, e.g. for engines, gearboxes, metal, electric parts. The machine is fully operational. We can send a video. Isdpfow Ngn Esx Adnoa

Condition: refurbished (used), Year of construction: 2014, operating hours: 7,275 h, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth - Overband magnet - Remote control Ijdpjxb Et Nefx Adnja - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW Iedpfx Adewqyh Nenoa

Condition: like new (used), Year of construction: 2021, power: 264 kW (358.94 HP), Electric engine: 264 kW Iodpfxownq Dij Adnoa Equipped with: Discharge conveyor, overband magnet, radio remote control.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Iedov S Hyvepfx Adnea Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Iodpfx Ajw U Txusdnja Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: excellent (used), Year of construction: 2015, operating hours: 5,200 h, power: 0.185 kW (0.25 HP), Used Untha LR700 Single Shaft Shredder Year 2015 5200 Hrs 18.5kW Motor Complete With Electric Control Panel Fitted With Screening Gate Ijdpfstu Uwxsx Adnsa Screw Auger Discharge Conveyor

Condition: refurbished (used), Year of construction: 2008, operating hours: 8,200 h, overall weight: 46,000 kg, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication Isdpfxjxb Et As Adnea - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Condition: used, machine/vehicle number: 13289, Rotor diameter: 450 mm Rotor width: 1500 mm Rotor knives: 136 Isdew Rg Smspfx Adnsa Stator knives: 2 x 5 pcs Infeed opening approx. 1500 x 1500 mm Drive motor: 60 kW The machine currently does not match the picture, as it is being overhauled.

Condition: used, Year of construction: 2014, operating hours: 18,700 h, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 200 kW (271.92 HP), rotational speed (max.): 87 rpm, input voltage: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Applications: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal recovery or material recycling, whether loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (ABB frequency inverter) Recooling unit: Yes, included Feed opening: 1790 x 1750 mm Filling volume: approx. 4 m³ Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz : 87 rpm Number of rotor knives: 41 pcs Knife dimensions, pointed knives: 87x87x38 mm Counter knives, lower: 5 pcs Scraper comb, upper: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Hopper: included Delivery time: immediate Ijdpfxsw Tk Ude Adnsa

Condition: refurbished (used), Year of construction: 2006, operating hours: 6,421 h, Doppstadt DW 3060 Büffel - Year of manufacture: 2006 Iedpfxsw Uczfs Adnja - Operating hours: 6421 - Engine: Mercedes Benz, 430 HP - 21 teeth - Remote control - Weight: 25,000 kg Machine is overhauled and immediately available

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Isdpjghgdnjfx Adnsa Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes.

Condition: used, Year of construction: 2002, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 90 kW (122.37 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 90 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 80 pcs. new Rotor knife shape: blunt knife 60 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Hydraulic unit: complete Isdpswtbyrofx Adnsa Sieve cassette: screens as per customer request Total weight approx. 10.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm Isdpfx Adsghgdyensa ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Wide range of applications for the ZXS series: Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled.

Condition: new, General: Iodpfx Asghgd Dednoa The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Applications: Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator.

Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Injection Molding Thermoforming Blow molding Recycling Ijdpoghgd Ssfx Adnoa Extrusion Waste

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. Isdpfsghgdvox Adnoa APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets