Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Bwjdpfx Akoxx Tfzs Esl Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Bodpfsyu Srmox Ak Eswl Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: used, Year of construction: 2008, 2008 | FSI TP 175 MOBILE | Used Shredder 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 19 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine ran well at the time of inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39966 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Bwodpfxoy D T Ive Ak Eol

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Bwsdsy D Nktspfx Ak Esl Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Bjdpfx Aey D Nicok Eswl Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Cable, Cable Remains, Small Electronic Devices Bwjdpfx Akjft U Sao Eol Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Working width: 1000mm Bodod Sblmspfx Ak Eswl

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Bsdpoyrfgrofx Ak Eswl Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: – New paintwork Includes: control cabinet, frame & hopper

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, power: 242.71 kW (329.99 HP), DOPPSTADT AK 330 S Diesel engine: 330 HP Equipped with: Screen basket (hole site: 120 mm), radio remote control, Bwodpsy Duuwsfx Ak Ejl original vehicle papers. Service was done. New tyres in April 2026. In very good and working condition.

Condition: used, Year of construction: 1986, total length: 1,900 mm, total height: 2,420 mm, total width: 1,700 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 70.144 - Main motor power [kW]: 45 - Rotation speed [rpm]: 1470 - Rotor width [mm]: 780 - Number of shafts [pcs.]: 1 - Opening width [mm]: 440 - Opening length [mm]: 6500 - Sieve perforation [mm]: 7 - Number of fixed knives [pcs.]: 10 - Transport dimensions: 1900mm x 1700mm x 2420mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bwedoy Dthvspfx Ak Eol Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 13210, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor knives: 76 Bodpfx Akoy Di R To Ejwl Stator knives: 4 (1 row) Feed opening approx. 1500 x 1500 mm Drive motor: 2 x 75 kW The photos shown here do not reflect the current condition of the machine!

Condition: good (used), CRUSHER / GRINDER / SHREDDER / MILL for polystyrene (EPS) waste. Power: 15kW The unit comes with an automatic control cabinet. It is prepared (has outputs) for a mill, a fan, and a conveyor belt. It has both manual and automatic functions. In automatic mode, it regulates the material feed by itself. The machine has been designed to prevent motor overload (“clogging” or “stalling”): Load monitoring: The system continuously measures the mill’s current draw (amperage). Automatic stop: When too much material is fed and the current rises above the set limit, the conveyor belt feeder stops automatically. Automatic restart: Once the mill processes the accumulated material and the load decreases, the system automatically restarts the feeder to supply the next batch of material. Bodpfx Ajumk Nmok Eewl Tag: EPS, crusher, grinder, foam shredder, mill, polystyrene recycling machine, foam crusher, compactor, foam densifier, volume reducer.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, power: 375.1 kW (509.99 HP), year of last overhaul: 2026, Mobile shredder DOPPSTADT AK 535 compact Fine shredding basket; hole-size can be agreed. Bsdpey A Iv Eofx Ak Eowl Foldable discharge conveyor with magnetic head pulley (magnet roll) Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm Bwodpjl I Dx Nofx Ak Eel opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Bodoyr Tx Ajpfx Ak Eowl Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: used, machine/vehicle number: 13289, Rotor diameter: 450 mm Rotor width: 1500 mm Bsdpfx Aoyr Tw Esk Eowl Rotor knives: 136 Stator knives: 2 x 5 pcs Infeed opening approx. 1500 x 1500 mm Drive motor: 60 kW The machine currently does not match the picture, as it is being overhauled.

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Rotor width: 1500 mm Rotor blades: 76 Stator blades: 1 row Inlet cross-section approx. 1500 x 1500 mm Drive motor: 2 x 45 kW Bodeyr Twrspfx Ak Eswl

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Bwedpfx Akeyr Tu Rs Esl Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Inlet cross-section approx. 1100 x 1500 mm Bwsdpfxjyr Tudj Ak Eel Drive motor: 37 kW

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Bsdpfxoyr Ttte Ak Eowl Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Bwjdpfxeyr Tpue Ak Eol Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Bodpsyr Tlpsfx Ak Eewl Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. Bwodpeyr Tg Tefx Ak Eol The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding. Bjdpoyr Tg Hjfx Ak Eowl

Condition: new, General: The single-shaft shredders of the ZTS/ZTTS series have been specifically developed for the shredding of whole or pre-shredded tires. Both ZTS and ZTTS shredders feature a large rotor diameter of 760 mm and working widths ranging from 1,500 to 3,000 mm. Both types come equipped with oversized, external bearings and dual drives. The tangential infeed ensures optimal feeding of input material without the need for an additional hydraulic pusher. All tire shredders are fitted with special wear protection in all relevant machine areas. The main differences between ZTS and ZTTS models are the number of stator knife rows and the type of screen perforation used. Applications: Bodpfx Asyr Tf Nek Eowl Machines of the ZTS series feature a single stator knife row and are therefore utilized for the first stage of pre-shredding car tires or other large, solid pieces to a final particle size of approximately 150 mm. For the second stage, a ZTTS shredder is used to further reduce the material to about 20 mm. The intelligent machine design, combined with the adjustable knife clearance, enables optimal separation of rubber and steel fractions. In an additional step, the steel content can be separated using a powerful magnetic separator.