Used shredders for sale (324)

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Dodpfx Aexx Tfzsgvech Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: excellent (used), Year of construction: 2022, operating hours: 208 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Dodjxd T Hcjpfx Agvsch Delivery date to be agreed upon

Condition: good (used), Year of construction: 2022, operating hours: 710 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control Dsdpfx Ajvrz Rvsgvjch - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Irrigation

Condition: used, Year of construction: 2021, operating hours: 5,000 h, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Dodpevnmldofx Agvjch Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Djdpfoxx Tigsx Agvsch Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Djdswnfwqspfx Agvech Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2022, operating hours: 3,250 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV Dcodpsxx N T Ijfx Agveh 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2023, operating hours: 5,189 h, Equipment: Dsdpfxjyu Snuj Agvjch Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Delivery date to be arranged.

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Dcedjyhckmspfx Agveh Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth Dcsdpsxx N Dgofx Agveh - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Dsdpfxeu Tha Is Agvech Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2018, operating hours: 3,297 h, functionality: limited functionality, Features of the basic unit: Infeed conveyor: •Highly wear-resistant, forged special chain •Infeed conveyor width: 1,700 mm •Infeed conveyor length: 4,700 mm Hydraulic system: •Infeed roller and infeed conveyor each with a separate drive and gearbox. The speeds of the infeed conveyor and the infeed roller are continuously adjustable. Overload protection through speed monitoring and reversing mechanism. Hydraulic tank with a capacity of 220 liters. Infeed: •The infeed roller is hydraulically driven, pendulum-mounted, and guided by 2 rack and pinion systems. •The infeed opening is approximately 660 mm high and 1,700 mm wide. Hammer mill: •46 hammers, hammer width: 80 mm Dsdpfxjza S Hnj Agvjch •Hammer tips can be individually replaced •Hammer mill width: 1,700 mm •Rotor diameter: 999 mm •Rotor speed: 1,000 rpm Motor: •SCANIA turbo diesel with a power output of P = 478 kW, compliant with current Euro emission standards Drive: •Direct drive via 8 V-belts Hopper dimensions: •Hopper opening length: 4,800 mm •Hopper opening width: 2,400 mm Throughput capacity: •200-300 m³/h and more, depending on the material Delivery date will be agreed upon.

Condition: used, Year of construction: 2021, operating hours: 4,689 h, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emissions standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gearbox 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm - Centrally arranged wear strips - 24 V electric control system - Additional electric pump for operating the following functions when the engine is switched off: “Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding hopper” - Complete radio remote control - Large lateral GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loader protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Additional equipment: - 3-axle semi-trailer chassis unit Dcjdpfx Agoyu Svxjvjh - Shredding system Size “L-C3” VARIOMAT - Size “L” limiter (20 pieces) - Hydraulic drive system - Double-sided watering system - Rear conveyor 8.5 m, 1,200 mm wide - Overbelt magnet Neodymium - Frame for overbelt magnet Neodymium - Central lubrication system with pump - LED light package for engine compartment and rear Delivery date to be arranged.

Condition: new, We design and manufacture rotors for machines such as shredders, granulators, crushers, and others. We make new rotors based on the supplied part (used/damaged) or design from scratch a completely new element made according to our documentation. We introduce proprietary solutions to increase durability and wear resistance, and to facilitate service. Our rotors are always better than the factory-installed ones. Many manufacturers intentionally use bad technical solutions to shorten the life of components. By choosing OESCE rotors, you are guaranteed extended trouble-free operation. We design and manufacture knives, friction linings and other components mounted to rotors. Dcsdpfx Aet Ecqasgveh Each rotor is balanced and the customer receives a certificate of this measurement. We invite you to cooperate and send inquiries

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Dcjdpfx Agswk Egwevoh Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Condition: good (used), Year of construction: 2017, operating hours: 12,000 h, Single-shaft shredder with push floor Rotor diameter: 500 mm Rotor width: 1200 mm 87 knives on the rotor Motor: 90 kW Screen with 20 mm and 30 mm openings Hopper capacity: 14 cubic meters Dcsdpfxozbzuwe Agvoh

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb - Counter comb in new condition Dedpfx Agjw S Iiiovech - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final - Only 980 operating hours

Year of construction: 2026, condition: new, Our offer includes knives for crushers, shredders, mills, for wood, mdf, hdf, pp, pet, abs, PE. Our knives are made of the best tool steel from the best steel mill in Metal Ravne, Slovenia. Tempered in the best certified hardening plants in Poland in oil o salt. (Not in a vacuum, what makes a difference). We present the certificate of the raw material and the hardening process. Our Knives are subjected to durability tests. We guarantee! Made in Poland = 100% Pricing Knives: - 40x40x23 - M12 (R01) - 8 Euro/1 pcs. Djdpfxeg Rcige Agvjch - 397x94x35-15 (P66/P132) - 269 Euro/1 pcs. Full set: 28 x (R01) 1 x (P66) 1 x (P132) _____ = 760 Euro Contact to get a quote for any other knife (Vecoplan, Untha, Kloss, Zeno, Zerma, Goliat, Lindner)

Condition: used, Year of construction: 1991, overall weight: 2,300 kg, power: 18.5 kW (25.15 HP), VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been completely overhauled and technically upgraded in 2025 and is fully operational and ready for use. Dedpfxet Dh T Dj Agvsch The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to the start position. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. The PLC system also allows adjustment of key operating parameters depending on the material being shredded, including maximum working power, shutdown power threshold, and the forward movement speed of the hydraulic press. This makes it possible to optimize the machine for different materials and ensures efficient and safe operation. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Throughput: up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance.

Condition: used, Technical details: drive motor: 4 kW revolution per minute: 14 U/min voltage: 380 V / Hz weight: ca. 0,5 t Chip Crusher - Shredder 2-shaft crusher current feed size 400 x 360mm crushing tools 8 pieces per shaft current drop-out size L: 350 x W: 250mm gear motor manufacturer Vector accessories: 2 crusher discs Dedpfxeu Nxrps Agvsch *

Condition: used, Year of construction: 2008, 2008 | FSI TP 175 MOBILE | Used Shredder 📍Location: France Dcsdpfx Agey D T Ivjveh 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 11400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 19 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine ran well at the time of inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39966 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 1,500 mm, power: 110 kW (149.56 HP), rotational speed (max.): 80 rpm, Genox K1500 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 110kW Drive motor (90kW & 150kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 1500mm wide x 480mm diameter Rotor with 88pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Djdpfjza Dndsx Agvjch Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 148 kW (201.22 HP), filling opening width: 1,200 mm, filling opening length: 6,000 mm, number of blades: 150, rotational speed (max.): 80 rpm, rotor diameter: 390 mm, rotor width: 1,200 mm, Genox J1200 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 148kW combined shaft motor power (4 x 37kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 80rpm shaft speed. Four 1200mm wide x 390mm diameter rotors with 150 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Dsdeza Avaspfx Agvjch Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture an 800mm version of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 258.5 kW (351.46 HP), filling opening width: 2,000 mm, filling opening length: 7,000 mm, number of blades: 350, rotational speed (max.): 50 rpm, rotor diameter: 635 mm, rotor width: 2,000 mm, Genox J2000 Series - Heavy Duty Horizontal Four Rotor Shredder suitable for processing long lengths of material i.e. pipe, profiles etc. 240kW combined shaft motor power (75Kw + 3x55kW) and an 18.5kW hydraulic power unit for the material feeder. The machine is equipped with heavy duty oversized gearboxes giving an 50rpm shaft speed. Four 2,000mm wide x 635mm diameter rotors with 350 pcs of blades in total. The blades are 40mm concave reversible design manufactured from high quality, heat treated alloy steel. Material force feeding is regulated according to motor loading to achieve optimal throughput. These parameters can be easily configured on site to suit the materials being processed. Dcjdpfx Agsza Au Aevsh Output size is controlled by a replaceable screen mounted beneath the lower rotor shaft, the size of which can be determined to suit the application. We also manufacture a 800mm & 1,200mm versions of this machine along with twin rotor and twin shaft (shear rotor) machines. Please contact us for more information and/or to discuss your requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor length: 2,800 mm, power: 220 kW (299.12 HP), rotational speed (max.): 80 rpm, Equipment: rotational speed infinitely variable, Genox BH2800 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 220kW combined motor power (180kW & 264kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2800mm wide x 650mm diameter rotor with 125 pcs, 40mm concave, reversible high quality heat treated alloy steel blades. 60mm blades are also available as an option. Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Dcsdoza Auijpfx Agvoh Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Standard screen size is 40mm, other sizes can be provided on request.