Used mounting technology for sale (158)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. Bodpfozwdx Nsx Aknjlp SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, Machine in great condition! Available Q1-Q2 2027 Bledpfe Ahw I Usx Aknsp

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, ASM -DEK- NeoHorizon 01 iX stencil printer. Quantity: 2 units. The machines are equipped with the HawkEye 750 camera and feature the DEK Cyclone vacuum system. Bsdpfxj Agniqs Aknolp Otherwise, they are in very good condition and available immediately. Inspection possible by appointment. We will gladly answer any questions you may have about these DEK machines.

Condition: used, functionality: fully functional, Year of construction: 2010, total length: 3,590 mm, total width: 1,432 mm, total height: 1,478 mm, overall weight: 870 kg, We offer this ready-to-use Rehm VXS basic 2100 (Type 422) reflow oven for SMT/re-flow soldering, manufactured in 2010. - Manufactured in 02/2010, put into operation on April 16, 2010 - Special shortened version, 7 zones: 4x preheating, 2x PEAK, 1x cooling - Operated in a single-shift mode from 04/2010 to 07/2021 (approx. 11 years), has been out of operation since then - Regularly serviced and cleaned; only one service intervention during the entire operating period (repair of the transport trolley, 06/2016) - Dimensions: 3,590 × 1,432 × 1,478 mm (L × W × H, ±50 mm) - Purchased as new directly from Rehm (original purchase price approx. 1.43 million CZK) - Data sheet and operating records available for viewing/download - Inspection and collection: Bonnel Technologie s.r.o., Wolkerova 2304/38, Cheb, Czech Republic (near the Bavarian border) Bedpjz Hnz Refx Aknjlp If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 2007, 2007 Felsomat Gantry Robot Loading Unit with Siemens PLC Bledpfx Ae Ahg Spoknop Rail Length 1,500mm Upright Height 2,300mm. With Transfer Unit. S/No. 206200 (2007).

Condition: used, Year of construction: 2008, Control system: Beckhoff, operation: touchscreen. Equipment: extraction system, milling and sawing separation, shuttle/loading system, enclosed machining area, safety enclosure with viewing windows, emergency stop switch, start/stop push buttons, three-color signal tower, pneumatic air preparation unit, Ruwac industrial vacuum cleaner. The system is operational and was shut down at the beginning of the year. Inspection possible by arrangement. Bledpfx Aks Ahi Tvjnep

Condition: used, Year of construction: 2012, Software version: 717 R23-1, mains voltage: 3x400V, rated current: 7.5A per phase, fuse protection: 3x16A, compressed air supply: 5-10bar, compressed air consumption: 600Nl/min, operation: SIPLACE user interface with monitor, connected load: 2.5kW, length: 1500mm, width: 2475mm, height: 2030mm, weight: 2.31t, without setup tables and component feeders, with CE marking. An on-site inspection is possible. Bjdpfxe Agn Ris Aknelp

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We are offering for sale our component cleaning system from Ziegener + Frick. The system is in like-new condition. Various loading frames are included. ION Clean cleaning table. Summary with AI: The IONClean cleaning table from Ziegener + Frick is a soundproof, turnkey stand-alone system for contactless and electrostatic surface cleaning of components. You can find an example video from the manufacturer under Videos. We will gladly answer any questions you may have about the system. An inspection is possible by appointment. Blsdpfx Aez Enr Tjknop New price of the system: approximately €85,000.

Condition: excellent (used), Year of construction: 2011, We are offering for sale our Viscom AOI S3088 - III in very good condition. - Manufacturer: Viscom SE, Hanover Blsdpfx Ajzv S Dwoknop - Type: S3088-III - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 - Serial number: 101159 - Camera configuration: 8M (4x orthogonal, 4x angled) - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB - UPS functional The system has been inspected by our technician and found to be in very good condition. We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: used, Year of construction: 2018, Technical specifications Bareboard loader with buffer function Manufacturer: ASYS Model: LLB 01 Year of manufacture: 2018 PCB dimensions: min. 70x80mm - max. 250x330mm PCB thickness: 0.8 - 4.0mm Buffer capacity: 5 PCBs Blsdpfxs Agf Efo Aknsp Automatic width adjustment Separately driven conveyor belts SMEMA interface Complete documentation Condition: Used, functional

Condition: good (used), Year of construction: 2015, • Manufacturer: ASYS Automatisierungssysteme GmbH • Model: VEGO AMS 03D (End of Line Station) • Year of manufacture: 2015 Blodpfx Akj Agfunensp • Magazine loader for three magazines • Interface: SMEMA • Transport height: 950 mm ± 50 mm (standard) • Automatic width adjustment • Connection power: 230 V / 50 Hz / 0.5 kW • Compressed air connection: 6 bar • Dimensions (approx.): 1,100 mm x 1,470 mm x 1,120 mm (L x W x H) • Weight: approx. 400 kg

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 14-250 001, workpiece diameter (max.): 80 mm, Title: Short Bar Loading Magazine FMB SL 80 S – Year of Manufacture 2004 – including accessories & forklift loading Description: Due to a change in our production processes, we are selling our FMB SL 80 S short bar loading magazine. The machine has operated reliably in our production up until now and is no longer needed due to the changeover. •Manufacturer: FMB •Model: SL 80 S Blsdpjz Eh Unjfx Aknop •Year of Manufacture: 2004 •Bar Diameter: 10 – 80 mm •Condition: Used Scope of Supply & Accessories: •Connection cable to the lathe (interface) is directly attached to the machine. •4 different sliding bars / feed bars for different material diameters are included. Loading & Logistics: •A forklift is available on site. •We will assist with loading onto your truck or the shipping company’s vehicle free of charge. Terms of Sale: The sale is exclusively to commercial customers (B2B) and is subject to the exclusion of any warranty and liability for defects. A proper invoice with VAT will be issued.

Condition: good (used), Year of construction: 2015, • ASYS INSIGNUM 2000 CO₂ laser with integrated rotating station Bjdpfx Akj Agfwqjnslp • Year of manufacture: 2015 • Max. marking area: 350 x 350 mm (without axis movement) • Printed circuit board formats: Min. 70 x 50 mm to Max. 460 x 460 mm • Board thickness: 0.8 mm to 3.0 mm (Permissible weight up to 2/3 kg) • Camera system: Integrated camera • Connection power: 230 V / 50 Hz / approx. 0.7 kW • Compressed air supply: 6 bar • Dimensions (approx.): 701 mm x 1,548 mm x 1,522 mm (LxWxH) • Incl. extraction system

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Bsdpfezlx E Tjx Aknjlp Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: used, Year of construction: 2011, Rated voltage: 230V AC, frequency: 50Hz, rated current: 6.3A, control voltage: 24V DC, compressed air supply: 5bar, compressed air consumption: 5Nl/min, connected load: 0.34kW, length: 790mm, width: 950mm, height: 1270mm, weight: 135kg. An on-site inspection is possible. Bljdj Agn Rqopfx Aknop

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Blodpfezhwvpsx Aknsp Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Rehm vacuum vapor phase soldering system Year of manufacture: 04/2014 Service recently performed by Rehm in October 2026 Vacuum package Manual loading and unloading of the process chamber in the operator area Air cooling directly above the assembly in the cooling area 1 basic work piece carrier, 650x650mm Automatic Galden filling system (25 kg HS 240) Water-cooled cooling section Camera for process monitoring Bledez Tdi Sspfx Aknsp

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Bsdpozn N Nnofx Aknjlp

Condition: used, functionality: fully functional, Year of construction: 2010, Fully functional. Good mechanical Manual, software CD and print supports included.  Blsdps Adr Agsfx Aknsp

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Both machines have been inspected and tested for full functionality in our workshop. Blodpsyrm E Aofx Aknjp All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. The machines are sold without component tables or MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Condition: good (used), Year of construction: 2006, For sale is our Teradyne Spectrum 9. Type: TSE 8862 Year of manufacture: 2006 Condition: fully functional (without monitor and keyboard) Equipment: 1 FIB/DeltaScan board Bjdpezh Txtjfx Aknslp 1 VP board 1 VP Expander board 1 VXI-MXI-2 1 High voltage PRISM board 10 CC2a master and expander boards Maintenance documentation and CE declaration available.

Condition: used, Year of construction: 2007, Rated voltage: 230V AC, frequency: 50Hz, rated current: 6.3A, control voltage: 24V DC, compressed air supply: 5bar, compressed air consumption: 5Nl/min, connected load: 0.34kW, length: 790mm, width: 950mm, height: 1270mm, weight: 135kg. An on-site inspection is possible. Bsdpfx Ae Agn Rmjknslp

Condition: used, Year of construction: 2006, Total of 8 working modules, plus 2 for spare parts (partially stripped). Head configuration per machines can be found under photos! Bodpfxj Afuv Ee Aknelp Selling as a full set!

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, For sale is an automation cell from the brand EROWA, type Robot Dynamic 150 Linear (ERD 150L), including the process control system JMS 4.0 MoldLine. With the exception of the gantry eroding machine, all production and measuring machines have already been sold. Only the EROWA automation is offered; the Gantry Eagle 500 can be offered separately. Bsdpfxsz Szh Ns Aknslp The system was put into operation in mid-2020 and is in very good and well-maintained condition. Technical data: Year of construction: 2020 Control / control system: JMS 4.0 MoldLine from Certa Systems Magazine capacity (total): - 20 pallet spaces for PARTOOL clamping system - 360 spaces for EROWA ITS 50 Turret rotation radius: -30° to +300° Transfer weight max.: 150 kg Identification system: EWIS 10 (ID chips) Loading station: Yes, with rotary table Safety enclosure: Yes, according to layout Acceptance: Complete CE acceptance Included in the offer: 3 gripper arms and grippers with RCS coupling, as well as RCS gripper S, support gripper for ITS 50, collection tray on the rotary turret, gripper station (Gripper Dock), software license for Robot Dynamic 150 L, machine interface box including interfaces, loading station, enclosure including all elements and doors, CMM - light curtain system. Note regarding tooling & coaching: The chucks, adapter pallets, vices, Partool tooling, and EROWA ITS holders are NOT included. Coaching by EROWA Automation is not included in the scope of delivery. Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices do not include VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), For sale is our Viscom AOI S3088-III in very good condition. Viscom S3088-III Bledez H Nl Ropfx Aknsp Year of manufacture: 11/2010 Serial number: 100967 Connection: 230/400V 3P/N/PE Frequency: 50-60 Hz Weight: 750 kg Operating system: Windows 10 Enterprise 2016 LTSB, 64-bit Processor: Intel Core i7-6700K, 4.00 GHz RAM: 32 GB Camera technology: 8M with color cameras and white LED lighting Sensor head: 4 cameras orthogonal (top view), 4 cameras lateral Software version: SI 9.70(11) Open eVision licenses: OCR and DMC Last calibration: 05.12.2025 Grayscale MFU from 03.12.2025: passed Geometric MFU from 03.12.2025: passed The system has been inspected and found to be in good working order. Functional video available. Inspection is welcome.