Used mounting technology for sale (156)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Fgedpfxszlx E Ts Akvsf Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Year of construction: 2011, condition: good (used), For sale is our Asys ARS 01 conveyor belt (with scanner). Condition: very good. Fgedpfx Akezlxc Sjvof ARS 01 Year of manufacture: 2011 Serial number: 040354.

Condition: new, 1 lot Eaton distribution cabinet and accessories - CI48-200 78896 32 pieces - CI43-150 95506 17 pieces - IM4-CI48 093200 4 pieces - FL4-4 19609 8 pieces - 3 pallets, shipping possible at extra cost Fodpfx Aow U Suhokvogf

Year of construction: 2016, condition: used, 2 coneyors available vintage 2012 and 2016. Used however operational! Fgodpfx Ajzlp H Ijkvsf

Year of construction: 2004, condition: used, functionality: unexamined, ASYS Rommel PCB Transport System – Items 1x LAG 55 WA Magazine Loader 2x TRM 01-S (1x OK, 1x spare part) 1x LAG 55 WA 470 Magazine Loader 1x LBE 55 WA 470 Magazine Unloader Fjdpfx Akozktx Eovsgf 2x FPS 30 Transport and Buffer Module - All devices are untested; however, where a power connector was present, at least the display was switched on and booted. - For an additional charge, we can arrange shipping or assist with it.

Condition: used, Year of construction: 2023, functionality: fully functional, Good maintenance history and working conditon! Fgedpfx Aszkr N Ajkvjf Ask for specification and pricing!

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder 1x 8/12mm 8-lane feeder Fjdpfx Aksw U Dpqovogf

Condition: used, Year of construction: 2017, functionality: fully functional, Working condition. Fodpfx Aezkg D Iskvegf Ask for additional information!

Condition: new, functionality: fully functional, machine/vehicle number: 005119, Year of construction: 2016, Equipment: documentation/manual, Swivel arm – spare part – König Smart Loader KA SL260 Complete new threaded spindle 25x25 KA-SL V4 with mounting parts for a loader/loading system for the lifting movement of the swivel arm – automation of the production machine (e.g. Reishauer) Koenig Automation AG – Switzerland, article 005119 New and unused, with assembly instructions – procured as a spare part for a swivel arm loader/loading system – automated loading system for a Reishauer grinding machine RZ 260. Price negotiable. Our asking price is €790 net ex works, plus packaging costs. Another separate spare part is: 1 set of Y-axis guides, new, unused – our asking price is €395 net ex works, plus packaging costs. Fodpfxjx Tqhlj Akvegf Subject to typographical errors and errors in technical data. We only sell to countries within the European Community.

Condition: used, Year of construction: 2015, functionality: fully functional, Vintage 2015, first taken into production 18.02.2016 Hamamatsu > 50% lifetime left Fedpfx Akozi Dc Esvegf Flat Panel Detector: > 50% lifetime left

Condition: good (used), Year of construction: 2018, ASYS TRM 03 Workstation * Dimensions (L × W × H): 1,590 × 800 × 1,055 mm * Transport height: 950 mm (±50 mm) * Weight: 200 kg * PCB size: 70–460 × 50–460 mm * PCB thickness: 0.8–4.5 mm Fjdpfx Akjzivt Novjgf * PCB weight: 0–3 kg * Maximum component height: ±40 mm * Power supply: 230 V / 50 Hz * Pneumatic supply: 6 bar (operating pressure 5 bar), oil-free compressed air * Sound pressure level: < 75 dB(A)

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical Data * Dimensions (L × W × H): 612 × 1,140 × 1,678 mm * Transport height: 950 ± 50 mm * Fixed stop: 250 mm * Magazine capacity: max. 250 mm stack height * PCB size: 70 × 70 mm to 460 × 460 mm * PCB thickness: 0.8 – 4.0 mm * PCB overhang during transport: 3 mm * Infeed interface: SMEMA * Outfeed interface: SMEMA * Automatic width adjustment via stepper motor * Automatic tracking via IC-Net * Continuous operation available Fgjdpfszivq Isx Akvef * Power supply: 230 V / 50 Hz * Power consumption: approx. 0.75 kW * Secondary voltage: 24 V DC * Pneumatic connection: 5 bar * Air consumption: approx. 5 l/min * Complete documentation available

Condition: good (used), functionality: fully functional, For sale is a high-quality FELSOMAT FlexBox for automated workpiece handling in serial production. The system is designed for the automatic loading and unloading of CNC turning, milling, grinding, or gear cutting machines. It features servo-driven handling with a pneumatic gripper and an additional linear transfer axis, enabling the implementation of multiple processing stations or larger travel distances. The system comes from an industrial production environment and is ideally suited for special machine builders, automation specialists, or as a basis for retrofit projects. Equipment: FELSOMAT FlexBox Fully enclosed safety enclosure Automatic linear handling Servo-driven axes Pneumatic workpiece gripper Additional linear transfer axis Workpiece storage Control panel Safety monitoring Control cabinet integrated Extraction connection Completely wired Typical applications: CNC turning machines CNC machining centers Grinding machines Gear cutting machines Measuring stations Assembly automation Manufacturing cells Technical data (typical) Feature Specification Manufacturer FELSOMAT Model FlexBox Design Automation cell Axes Servo linear system Gripper pneumatic Workpiece handling automatic Voltage supply 400 V Safety cabin present Additional axis Linear transfer Scope of supply FELSOMAT FlexBox Servo handling Linear transfer axis Gripper system Control panel Control cabinet Fodjzivapepfx Akvegf Safety cabin Condition The system is in good optical condition. The handling system, linear axis, and safety devices are all fully functional. The machine is being sold due to the closure of the operating facility. An inspection can be arranged at any time by appointment.

Year of construction: 2017, condition: ready for operation (used), A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible. Fedpfjzidkvox Akvegf

Year of construction: 2006, condition: good (used), For sale is our Teradyne Spectrum 9. Type: TSE 8862 Year of manufacture: 2006 Condition: fully functional (without monitor and keyboard) Equipment: 1 FIB/DeltaScan board Fgjdpfx Akozh Txtevef 1 VP board 1 VP Expander board 1 VXI-MXI-2 1 High voltage PRISM board 10 CC2a master and expander boards Maintenance documentation and CE declaration available.

Year of construction: 2010, condition: good (used), Our Asys buffer system is for sale. Type: FPS 30 B Year of manufacture: 2008 Condition: good Available immediately Fgsdpfsyylqzsx Akvof

Year of construction: 1998, condition: ready for operation (used), A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible. Fgodpfxjzhw Tho Akvof

Year of construction: 2014, condition: good (used), functionality: fully functional, We are offering the Nutek NTM310-CXL model here. This is a flip station/inverter. The PCB length is adjustable from 80 mm to 460 mm, and PCB width from 75 mm to 460 mm via handwheel. Removable stainless steel drip tray. The transport direction is from left to right. The item is currently located in Satu Mare, Romania; upon purchase, the system can also be relocated to Germany. Fgjdpfx Aksxgc N Ssvsf

Year of construction: 2008, condition: good (used), Our Rommel Scanstation is available for sale. Model: WL 1000 ID-X Year: 2008 Condition: good Immediately available Fgsdpfx Akjyyk T Ujvjf

Condition: used, Year of construction: 2010, functionality: fully functional, We have several Rehm reflow ovens and Rehm drying ovens (paint dryers) for sale. The ovens are in good, clean condition and fully functional. 1 x Rehm VXP nitro 3850 (year of manufacture 2010), type 834 (project no. 2680), location: Buchenstraße 18-20 / 93426 Roding = €4,500 (negotiable) We also offer: Fedpfxjw Srqqj Akvsgf Asys TRM 03 (year of manufacture 2012) Asys FPS (year of manufacture 2010) Siplace S 27 and Siplace F 5 HM (year of manufacture 2006) Exra X6 HSP (year of manufacture 2008) – spare parts carrier Knodel drying oven (year of manufacture 2015) Nutek Coating Inverter (year of manufacture 2014) and more. Please contact us; we will gladly send you further information and photos of our equipment.

Year of construction: 2012, condition: used, Operational condition PCB cleaning unit. Several available. Ask for photos and pricing Fsdjyup Sdopfx Akvegf

Condition: used, Working condition. Fsdpfozf H Icex Akvsgf

Year of construction: 2004, condition: ready for operation (used), An Mimot SMD placement machine is available. Infeed height: 888mm, max. component dimensions X/Y: 55mm/55mm, max. component height: 10mm, placement accuracy at Sigma 4: 35µm, repeatability at Sigma 4: 10µm, angular accuracy at Sigma 4: 0.07°, placement rate according to IPC: approx. 14400components/h, min. PCB dimensions X/Y: 50mm/500mm, max. PCB dimensions X/Y: 380mm/400mm, PCB thickness range: 0.5mm-4mm, maintenance: 02/2025. Machine dimensions X/Y: approx. 3100mm/1100mm, weight: approx. 1850kg. Including an extensive feeder package. Documentation available. An on-site inspection is possible. Fodpfxszd Eicj Akvjgf

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers Fgodpoyhzplefx Akvef ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Fjdpfx Akoy Nmmievsgf Custom modifications deviating from the standard model that were carried out for us: 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. If you have any questions or require more information, please feel free to send us a message or call us.