Condition: refurbished (used), Overhauled tensile testing machine model Erichsen 472-500N Force Range: 0-500N Traverse resolution: 0.01mm Test speed: 0.5-500mm/min Truss stroke: 800mm Installation space width: 205mm Dimensions (HxWxD): 1035 x 340 x 320mm Weight: ca.40kg incl. 200N force transducer Force transducer model 713-200N Dueb Eendca Rsxi Edjt Measuring Range: 0-200N (Optionally, other force transducers possible) incl. new machine control system Controller board with USB port for PC control via Windows incl. software package PM-Soft-Smart PC control and evaluation software for testing machines, executable on PCs with WINDOWS 10 or 11. The modern and powerful test software enables test sequences and evaluations in accordance with the relevant test standards, as well as the self-design of test templates and evaluations with the integrated test template editor and the protocol generator. Hint: The software offered requires a PC with Windows 10 or 11 and a USB interface. Incl. factory calibration of the force transducer in tension and compression direction with calibration certificate

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Description: Mitutoyo Manufacturer: Mitutoyo Type: CV-500 The Contracer is complete with PC, software, monitor and vice. Dsb Exi Ejtxyv Isdeut

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, Functionality: fully functional, machine/vehicle number: CC5741150004, year of last overhaul: 2025, warranty duration: 12 months, The PROFITEST PRIME AC makes your investment decision easy. Because with the accessories perfectly tailored to your requirements, electrical systems according to DIN VDE 0100-600, machines and systems according to VDE 0113-1, low-voltage switchgear assemblies according to VDE 0660-600-1, PV systems according to VDE 0126-23 and e-charging stations according to VDE 0122-1 can be tested in accordance with the standards. Dsbov Hw S Se Exi Edsut This device has been used twice. It has been calibrated up to date (see attached photo) and checked by the manufacturer.

Condition: excellent (used), CTS Deb Ejvb Hanexi Edeut Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: refurbished (used), Year of construction: 2004, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 600 mm, Mitutoyo CMM Crysta Apex C9206 Measuring ranges 900x2000x600mm Accuracy 1,7 + 3L/1000µm Slightly damaged V-Axis covers (will be replaced or delivered without) Software MCOSMOS-1 V3.5, Windows 10 PC or selectable upgrade to: - Mitutoyo MCOSMOS 4.2 incl Geopak & MCAT1000S or new license - EasyCMM I++ Server plus Inca Professional Duob Exef S Tmvei Edot Probe Renishaw PH10MQ with either: - Renishaw Touch probe TP200 - Renishaw Touch Probe TP20 Selectable options: - Scanning Probe Renishaw SP25 - Probe Change Racks - New PH10MQ+ Head and Probe (upgrade) - MCOSMOS Offline license MCAT1000P - Bilz Pneumatic Vibration Damping System on demand Installation & Calibration (plus additional travel expenses) Including 3 Month Warranty (excl. travel expenses)

Condition: good (used), Year of construction: 1984, turning speeds 1500-3000 U/min dia. axle journal 9-70 mm set-up time 2 min Protection class IP 44 0 total power requirement 0,65 / 0,85 kW Technical data - rotors Rotor weight: 0.5 to 75 kg Load capacity Symmetrical: up to 100 kg (50 kg per bearing pedestal) Low requirements: any Rotor diameter above machine bed: max. 630 mm Bearing journal diameter: 9-70 mm Compensation plane: freely selectable (also overhung) Speed limit: Max. Speed, so that G2n2=180·106kgmin2n2G2=180·106min2kg Dsbswbvhge Exi Edeut Applies to medium-sized rotors. Small rotors must be supplemented with additional weights. Max. Display sensitivity (per bearing level): Depending on the measuring device Standard: 1 mm pointer deflection or 1 unit = 0.8 g unbalance

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0824715, Measuring arm Measuring range (X/Y/Z): 1200 mm Incl. trolley and accessories Duob Exi Eoqgdkqedot Excl. computer and software

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, The measuring machine is fully functional and various probes are included. Dujb Exetq Ibnji Edst

Condition: used, PELI 1400 ja ja Dueb Exiofc T U Us Edjt +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 11 K/min. Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Hot chamber temperature range: +50°C to +220°C. Cold chamber temperature range: -80°C to +70°C. Test chamber dimensions: Width: 470 mm. Depth 650mm Height 410mm Dob Exjwb Dqiei Edout External dimensions: Width 930mm Depth 2115mm Height 1970+mm Plug-in diameter 67mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 10 kW Rated current 25 A Refrigerant R404A / R23 Weight: 1000 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 1992, Measuring Range X – axis 700 mm Y – axis 1000 mm Z – axis 600 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 800 kg base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm Duob Ejgvg I Eoxi Edot DCC Controller Mitutoyo CMMC-3S DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH1, option PH9 or PH10M Probesystem Renishaw TP200 Computer Windows 10 Workstation Software MCOSMOS-1 V3.5

Condition: good (used), Analyzer, vapor pressure tester, Minivap VPS Dsb Exjwbd Twoi Edjut -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

Condition: used, Year of construction: 1998, Functionality: fully functional, Wenzel alignment station for the Erowa Charmilles Robofil 2030SI Duob Exi Eowdmv Hedet Incl. base cabinet

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Dusb Eot T Uavsxi Edst

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. Dujbjnfvmhj Exi Edet The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Condition: excellent (used), Vötsch Type: VT 7034 Test chamber capacity: 335 liters Capacity for temperature tests Temperature range: -70 to +180°C Duob Eowbpvwsxi Edet Temperature deviation (temporal) K ±0.1 to ±0.5 Temperature deviation (spatial) K ±0.5 to ±2.0 Rate of change: Cooling: 1.3 K/min According to IEC: Heating: 3 K/min Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 5.9 kW, Rated current: 12 A Side feedthrough: 5.5 cm / 12.5 cm Cabinet is air-cooled Refrigerant: R 404A and R 23 For your safety, the following information is provided as a buyer! The following procedures are performed on the chambers we offer in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: refurbished (used), Year of construction: 2004, Complete refurbished Sheffield D12 with very new controller; probe, software etc. (2017) - 3D measuring machine with liner guideways (no air necessary) - Machine is moveable (wheels) - Measuring range X / Y / Z = 500 x 900 x 400mm - Accuracy acc. to ISO 10.360 MPE = 4,9 + 4L/1000µm - Pantec Eagle Controller - Temperature control on demand (new) Dujbefmkxie Exi Edjt - Renishaw PH1, on demand PH10T (used or new) - Renishaw TP20 (used or new) - Renishaw MCR200 probe change rack (on demand) - Software Inspect3D Inca Professional (new + options) - Computer HP Workstation W10 (like new) Machine is ready for demonstration

Condition: excellent (used), Functionality: fully functional, Spot welding machine W-50RB for the application of e.g. high-temperature strain sensors and strain gauges Duob Eowc Uh Iexi Edet

Condition: new, workpiece weight (max.): 10,000 kg, rotor diameter: 2,500 mm, Horizontal soft-bearing Balancing machines 9K719 with load capacity from 100 to 10000 kg are designed for high-precision balancing of rotors of electric motors, pumps, compressors, blowers and exhausters, gearboxes, turbines of power engineering. Self-aligning rollers ensure proper rotor alignment, simplifying setup and reducing balancing time. Combined Drive System has a unique configuration with two axial drives and a belt drive mounted on a single bed. Overall, this machine is highly versatile and effective in balancing various types of rotors, making it ideal for repair and production shops. HIGHLIGHTS • Soft-Bearing System: This system ensures linear sensitivity across the entire speed range during balancing. The result is exceptionally high balancing accuracy, achieving up to 0.04 g·mm/kg across all rotor mass ranges. • Self-Aligning Roller Cassette automatically adjusts to the rotor along two axes, eliminating the need for precise centering. This design reduces machine setup time and, consequently, the overall time required for balancing. • Wide Contact Area Rollers: The cylindrical rollers provide a broad contact surface, preventing scoring or deformation of the rotor's support surfaces. This is crucial when balancing heavy rotors for extended periods, minimizing the risk of damage due to prolonged contact or improper loading. • Combined Drive System: Rotors of relatively low mass can be driven by “belt drive”, which makes the machine more versatile and allows balancing a very wide range of parts. Heavy rotors are rotated by "axial drive" using a cardan shaft. • Rotor Jacks: Specialized loading devices can be integrated to ensure smooth and precise rotor placement onto the roller supports. This minimizes the risk of damage to the delicate roller assembly, particularly when handling heavy or sensitive rotors. • High balancing accuracy due to automatic calibration of the balancing machine directly for each rotor by determining the influence coefficients. Its ease of use, high measurement accuracy, and integrated specialized features enable balancing professionals to achieve outstanding results in the shortest possible time. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. • No need for special foundations and vibration isolation, no need to fix the machine to the floor. SPECIFICATIONS Weight range of balanced rotors 100 - 10'000 kg Maximum rotor diameter (above the bedding) 2500 mm Distance between centres of rotor supports 400 – 5600 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 1000 rpm Electric motor power 30 kW Parameters of the supply network 380V, 3 Ph, 50Hz Dusbswdgpts Exi Edjt Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: excellent (used), Espec Type: EWSH282-4CW Temperature and Climatic Test Chamber Water-cooled Temperature range: -65°C to 150°C Temperature fluctuation: ±1°C Temperature gradient: ±2°C Temperature change rate Heating: approx. 2.5K/min Cooling: approx. 2.5K/min Humidity range: 20 to 95°C RH Humidity fluctuation: ±5% RH Humidity gradient: ±5% RH Dimensions External dimensions: Width 2324 mm, Depth 4006 mm, Height 2889 mm Internal dimensions: Width 1829 mm, Depth 1829 mm, Height 2388 mm Voltage: 8.0 m³ Dujb Exskl Axtoi Edst Weight: approx. 3,600 kg Power supply: 400V, 3PH, 50HZ (+5% / 10%) Controller: Espec SCP-220 Refrigerants: R-404a and R-508b Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2012, Coordinate measuring machine for inline and prduction use from Mitutoyo in good condition, built 2012, installed 2014 Controller Mitutoyo UC240, Probe Renishaw PH10MQ/TP7, Software Mitutoyo MCOSMOS-1 V3.5 Measuring ranges: X – axis 905 mm Y – axis 1005 mm Z – axis 605 mm Accuracy acc. ISO 10360 MPEE = [2,5 + 3,5L/1000] µm at temperature range 18… 22 °C Base material Steel fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale Resolution 0,0001 mm DC motores with encoders Guideways linear guides Probe Renishaw PH10MQ with PHC10-2 plus (used) Probe Renishaw TP7 optional with ACR-3 (used) Computer Workstation WIN 10 (used) or equipment on demand e.g. upgrade to Renishaw scanning probe Installation and Calibration € 5.000,-- plus travel expenses Dujb Ejh Nu Uhjxi Edet On demand: - SP25M + FCR rack instead of TP7 ( + € 12.000,--) - Upgrade PH10MQplus (€ 8.000,--)

Condition: excellent (used), For the application of thermocouples/thermocouple wires. Deb Exi Ejwc Ud Nsdsut Used only for laboratory applications.

Condition: used, Glasses Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety controller: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: adjustable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/pivoting membrane holder with 3 removable cascade rings for filter membranes with a diameter of 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; Length: 5 inches Dobjwaypfo Exi Edeut System pressure: maximum 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41°C Tank volume: approx. 12.8 liters Tank can be filled via a manual 3-way ball valve Recirculation and reuse of the rinsing medium Permissible ambient temperature: +15…+25°C Noise emissions are below 70 dB (A) Flow-cap top with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis fluid thanks to a sliding guard Collecting tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass keypad and stylus with the 12" option COMFORT touch panel 32 different test programs, each with 30 rinsing steps Functions: Spraying, rinsing, ultrasound Basin 750 x 600 x 500 (W x D x H) mm with a usable volume of approximately 5 l for ultrasound (with hemisphere Ø300) Hinged safety screen with three movable panels for manual access (protects employees from splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. A 2.5 mm diameter nozzle is included. Insertion opening for components: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic application for components up to 3 kg Product support grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Power supply (machine): 230 VAC 10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Back-up fuse: 16 A (max.) Supply cable: at least 3 x 1.5 mm² Control voltage: 24 VDC3) External dimensions: H x W x D 1922 x 800 x 893 mm Weight: 324 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), Year of construction: 2017, Measuring Range XY – axis Ø350mm Z – axis 200 mm Accuracy acc. ISO 10360 E = [2,9 + 4L/1000]µm incl.: Dusbsr Elmpe Exi Edet - Renishaw TP20 (new) - Renishaw MCR20 probe changer (+1 additional module) - Aberlink 3D software On Demand: Aberlink CAD offline programming/ CAD compare DEVA USB joystick Installation and training (1 day) fee € 3.500,-- excl. travel costs

Condition: good (used), Year of construction: 1992, Measuring Range X – axis 700 mm Y – axis 600 mm Z – axis 450 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 500 kg base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S DC motors all axis Djb Eohrulkjxi Edeut Guideways air bearings Tilt&swivel head Renishaw PH1 (PH10 on demand) Probesystem Renishaw TP200 Computer Windows 10 Workstation Software MCOSMOS-1 V3.5