Used material testing for sale (482)

Year of construction: 2019, condition: ready for operation (used), A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000. Tedst Daq Ujpfx Apdod

Year of construction: 2008, operating hours: 470 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Yxlon MU 2000, Yxlon MU 2000 type industrial X-ray screening equipment with 160 kV output: The system underwent a complete overhaul in 2020. The flat panel and all axis control electromotors were also replaced! The stained glass viewing window with a safety lock can be opened with two hands, allowing workpieces to be inserted without stopping the radiation. The workpieces can be moved using a five-axis manipulator. The movement can be programmed, which speeds up the work and improves the accuracy of the evaluation. However, manual movement for inspection is also possible. Size and weight of the workpieces: - Diameter: 400 mm, Length: 900 mm, Weight: 60 kg - Cabinet dimensions: 2200 x 2700 x 1800 mm - Weight: 4000 kg - Computer control The machine automatically moves the inspection table and adjusts the tilt angle and height of the C-arm according to the program compiled based on the parameters of the areas to be tested, so that the number of testable pieces can be significantly increased in the case of serial tests. Several components can be loaded into the cabin at the same time, and the machine examines them one by one according to the programming. MG 165 X-ray device Y.TU-160 D 06 metal-ceramic X-ray tube, for detecting small defects in steel or aluminum castings, parts - Focal spot size: 1.0/0.4 mm - Test voltage: 8-160 kV, 1.00/0.64 kW power - Closed system water cooling WL3002 - Translucent material thickness: steel 35 mm, / aluminum 45 mm XRD Flat Panel - 200 x 200 mm active area - 512 x 512/400 μm/30fps or 1024×1024 pixels/200μm/15fps resolution - Special frame grabber - Y.T24.CD01, 24″, 1920×1200 pixels, colour TFT monitor - Load capacity: 160 kV Control panel - MGC 41 control panel - Manipulator control (joystick) - Door control, push buttons /two-handed/ - Image processing control - Digital image processing software - Image archiving - Image captioning - Image comparison with a reference image - Zoom function - Blackout control - Fast video card + Frame grabber + evaluation PC - Measurement and calibration functions - Windows operating system Tsdpfx Asu Hzvxjpdod - DICONDE data format

Condition: good (used), Stock number: 2938 Tjdjvcbu Ajpfx Apded Manufacturer: Wolpert Year of manufacture: 1960 Type: Testor HAT 1E Test method: Rockwell 150 kg Brinell 250 kg (?) Table diameter: mm Projection: 125 mm Test height: 200 mm Accessories: Machine is without table Weight: approx. 70 kg Machine dimensions: 200 x 400 x 700 mm Condition: good

Year of construction: 2020, condition: excellent (used), WM1 300 CNC incl. Renishaw TP 200 Year of manufacture: 2020 Clamping tools from DK Fixiersysteme Tedpfx Apezpwd Nedjd 3-axis CNC control High-resolution CCD matrix camera 1.5x magnification Incident lighting via LED ring light; 4 sectors and 1 ring individually switchable Precision measuring stage (X and Y axes) Diode laser for positioning assistance Joystick and trackball for axis movement with fast/slow toggle Camera-based measurement data acquisition Precise edge detection in transmitted and incident light using intelligent image processing algorithms Compact and handy – high performance Rapid operation with maximum measurement precision Special features Incl. Renishaw TP 200 touch probe system Switchable LED surface illumination Diode laser for positioning assistance With a measuring range of 300 mm × 200 mm × 200 mm, it excels particularly with stamped parts, plastic and rubber components, milled parts, tools, profiles, and PCBs. Key highlights of the measuring microscope include camera-based measurement data acquisition, rapid operation, and high precision. Another notable feature is the precise edge detection in transmitted and incident light using smart image processing algorithms. Despite its high performance, the WM 1 300 CNC is compact and handy, measuring 900 mm × 950 mm × 950 mm. Please feel free to contact us if you have any further questions!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Tsdpozpy Idefx Apded Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Tjdpfxezmqx Ij Apdjd Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Tedpjy Sy Npofx Apdjd Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: used, PINK Type: PINK VT 300-600-300-1 Vacuum drying oven Space requirements for operation and maintenance Width min. 3000 mm, Height min. 2500 mm, Depth min. 2500 mm Dimensions VT External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber: 79 liters Operating temperature: min. 20°C, max. 150°C Electrical connection: Connection power 3 x 400 V; 50 Hz N / PE 8.5 kVA Heating power: 6 kW Cooling power: 6 kW at 15°C medium temperature and 15°C cooling water Tsdpfezdi Ivex Apdjd Heating: Floor, ceiling, side walls and door double-walled, heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 Pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system: 3 bar Weight: 300 kg Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, LDS + Andreas Schmid Vibration test system with climate chamber LDS V721 + TK 8000/-50/120 4-shaker MIMO system with 8 m³ climate test chamber, -55 °C to +140 °C For sale is a used vibration test system with four LDS V721 shaker exciters and an Andreas Schmid climate test chamber. Technical data, shaker system: Shaker exciters: 4 × LDS V721, air-cooled Amplifier: PA 1000L Controller: imv K2 MIMO (Multi Input Multi Output) Software: imv K2 Excitation types: Sine / Random / Shock / Real-time profiles Frequency range: 5 – 4,000 Hz Velocity: max. 0.7 m/s Displacement amplitude: max. 25.4 mm p-p (1 inch) Acceleration: max. 44 g RMS / 66 g Peak Load capacity: max. 100 kg per shaker Force vector per shaker: 2.9 kN peak sine / 1.9 kN RMS random / 4.6 kN peak shock Mounting area: approx. 1,000 × 1,000 mm Aluminum profile frame The four shakers can be operated synchronously or asynchronously via the MIMO controller. Without the profile frame, mobile use as a modal shaker for large test specimens is possible. Technical data, climate chamber: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: TK 8 Monoblock, welded Test chamber: 2,000 × 2,000 × 2,000 mm (8 m³) Door: 2,000 × 2,000 mm 2 test chamber windows in the door: 460 × 460 mm Temperature range: -55 °C to +140 °C Temperature stability: ±0.5 K over time Climate range: +10 °C to +95 °C Humidity range: 10 – 95 % RH Refrigerant: R404A / 29 kg Insulation: 140 mm PU, CFC-free, B1 according to DIN 4102 Dimensions and weight: Chamber without base: approx. 2,340 × 3,600 × 2,800 mm Tsdpfezg Tv Nox Apdod Chamber with base: approx. 2,340 × 3,600 × 3,800 mm Unit: approx. 1,200 × 2,400 × 2,200 mm Weight, shaker system: approx. 2,000 kg Weight, climate chamber: approx. 4,500 kg Total weight: approx. 6,500 kg Equipment: 4 × LDS V721 shaker exciters PA 1000L amplifier imv K2 MIMO controller and software 1 × 1 m aluminum profile frame Andreas Schmid 8 m³ climate test chamber Refrigeration unit Accessories as shown in the pictures Application areas: Vibration and shock testing Climate and temperature testing Modal analysis Automotive and component testing Research and development Scope of supply: LDS shaker system with amplifier and MIMO control Andreas Schmid climate test chamber with unit Existing accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2011, condition: used, The LECO TC-400 ON analyzer is a highly precise laboratory instrument for determining the oxygen and nitrogen content in solid samples. This system is typically used in metallurgy, materials testing, research, and quality assurance, providing reliable elemental analysis for a wide range of inorganic materials. The TC-400 operates as an inert gas fusion analyzer (ON/O-N analysis) and enables: Determination of oxygen (O) and nitrogen (N) in solid samples Analysis of metals, alloys, ceramics, and powder materials Highly precise measurement through fusion extraction in a graphite crucible Automated sample loading (depending on the configuration) Evaluation via integrated analysis software Repeatable results for quality and process control Documentation and data management via TCWin Analysis Software (Version 4.24) Todozkaa Ajpfx Apdjd Thanks to its robust LECO technology, the TC-400 offers stable performance, high measurement accuracy, and a proven analytical platform for demanding applications in research and industry.

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. Tedezt S Hmopfx Apdod The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: used, Weiss Type: WT3-600/70/5 Weiss temperature testing cabinet WT3-600/70/5 water-cooled version with S!MCON / 32 control system and touch panel Control panel "Touch Panel" By simply touching the function symbols on the "Touch Panel" control panel, all control and operating commands can be activated. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing cabinet is equipped with adjustable feet. Feedthroughs The testing cabinet is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: DN 125 mm L1: DN 50 mm Tsdpfx Aoy Nibpepded Test chamber volume: approx. 600 liters External dimensions including hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions excluding hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Data for temperature tests: Temperature range: -70 °C to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 7.5 K/min Cooling: 7.5 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: approx. 23 A Rated power: approx. 13 kW On-site fuse protection: 16 A slow-blow Sound pressure level: Measured at a distance of 1 m in front / 1 m height: approx. 58 dB(A) Refrigerant: R-404A / R23 Weight: approx. 620 kg For your safety as a buyer, here is the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2020, Ceia THS-MS21 Metal detector Tjdpfxezzf Hvj Apded 2020, Stainless metal detector head, aperture 350mm x 100mm, with controls, 3Ph

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Todpjzzli Rofx Apdod Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/480/70/15 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C For sale is a used Vötschtechnik ClimeEvent C/480/70/15 climate testing chamber in a water-cooled version. Suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. Temperature and humidity profiles, as well as automatic test programs, can be executed via the touchscreen control. Technical Data: Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C Heating Rate: approx. 17 K/min Cooling Rate: approx. 15 K/min Max. Heat Compensation at +20 °C: approx. 8,000 W Climate Range: +10 °C to +95 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +94 °C Refrigerant: R449A / R23 Refrigerant Quantity: 4.00 kg / 2.30 kg Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 24 kW Rated Current: 43 A Cooling: Water-cooled version Cooling water inlet and outlet Connection for demineralized water Overflow and condensate drain Dimensions: External dimensions according to the installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Equipment: Todpfxez Airfe Apdsd Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Viewing window Test chamber lighting Shelves / Insert levels Side test chamber openings RS232, RS485 / RS422 and USB Status, alarm and maintenance display Program management and report function Transport Data: Transport dimensions: approx. 2,857 × 1,115 × 2,020 mm Weight according to series documentation: approx. 1,350 kg Shipping by freight forwarder possible Condition: Used Workshop inspected Optical condition as shown in the pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/480/70/15 Shelves as shown in the pictures Available documentation / Operating manual Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Year of construction: 2020, condition: used, Two identical QAVERtec testing and measuring machines for quality control of freshly produced concrete products are offered. Facing/core porosity measuring range: 0%-100%, porosity resolution: 1%, height measuring range: 35mm-130mm, height measurement resolution: 0.1mm, weighing range: 0kg-25kg, scale resolution: 0.01kg, density determination: calculation of bulk density, max. vacuum: 900mbar, tolerance: +/-2%, working radius: 5m, PC unit: CX5130-0175, operating system: Windows 10, display: 19 inches. Machine dimensions X/Y/Z: 1550mm/1150mm/530mm, weight: 120kg. Documentation available. Inspection by arrangement is possible. Tsdozxhlcopfx Apdod

Year of construction: 2026, condition: like new (used), Binder KB PRO 130, model year 2026, ex-demo unit in new condition. 2-year warranty on spare parts. Product description: PRODUCT DESCRIPTION A versatile workhorse among thermostat chambers: KB PRO is our most efficient incubator with cooling. A temperature range from -20°C to +100°C and extensive programming functions enable a wide range of applications that go far beyond incubation. KEY FEATURES Temperature range: -20°C to 100°C Proven APT.line™ preheating chamber technology Energy-efficient cooling thanks to a modern inverter refrigeration unit Cooling using the environmentally friendly refrigerant R-290 Door heating to prevent condensation Adjustable fan speed Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner door made of safety glass coated with metal oxide Two wire shelves made of stainless steel Access port Ø 30 mm with silicone stopper Stackable design Intuitive controller with touchscreen, time segment programming, and real-time programming Internal data logger, measurement values in open format can be read via USB Independent temperature protection class 3.3 (DIN 12880) with optical and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB Todpfx Apey Urc Hjdsd BINDER Multi Management Software APT-COM™ Basic Edition Optional CO₂ gas modules for plant cultivation (0-1%) and cell culture (0-20%)

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Todpjzd Sdgofx Apdod Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable test geometries. Standards: • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement methods: • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. This modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with only a few steps. Due to the wide range of positioning and measuring devices offered, the digi test II is the right choice for the laboratory, production, quality assurance, and development when testing a broad product portfolio. Many shapes – one solution The modular expandability of the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not just measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually adjustable positioning device, available as an accessory for measuring individual test specimens for the digi test II as well as the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of all kinds to be clamped and fixed for measurement. Tjdpfozn I Tfsx Apdsd

Condition: excellent (used), Vötsch VC³ 4018-M climate testing chamber for leather goods, -40 °C to +180 °C, 190 l, 10–98 % RH, Vaisala and SIMPATI® Modified special version for leather testing Temperature range: -40 °C to +180 °C Test chamber volume: approx. 190 liters Humidity range: 10–98 % RH Cooling: water-cooled For sale is a used Vötsch VC³ 4018-M climate and temperature testing chamber with humidity function. The device is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Special version "-M": The model suffix "-M" designates a modified version for testing leather and leather goods. Extended climate range up to +120 °C at 10 % RH. Capacitive Vaisala humidity measuring system Compressed air connection / GN2 K3000 3.5-inch touch panel instead of the standard 8-inch panel Touch panel in the test chamber door Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 4018-M Test chamber (W × D × H): approx. 580 × 450 × 750 mm External dimensions (W × D × H): approx. 870 × 1,550 × 1,800 mm Weight: approx. 470 kg Heating: approx. 4 K/min Cooling: approx. 4 K/min Max. heat compensation: approx. 2,300 W Temperature deviation: ±0.1 to ±0.5 K Temperature homogeneity: ±0.5 to ±1.5 K Climate data: Standard climate range: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity deviation: ±1 to ±3 % RH Heat compensation, climate operation: approx. 400 W Special climate range for leather testing: up to +120 °C at 10 % RH Refrigeration and connection data: Refrigerant: R404A, filling quantity: 1.6 kg ND max.: 22.5 bar g, HD max.: 25 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW, rated current: 14 A Equipment: 3.5-inch ControlPad Vaisala humidity measuring system Compressed air connection / GN2 K3000 Connection for demineralized water Viewing window and stainless steel test chamber Test chamber lighting 2 × 24 V / 50 W Cable glands Ø 125 mm and Ø 50 mm 3 insert racks SIMPATI® software version 2016 with 2 device licenses Certificate of authenticity and original operating manual Test documents and accessories as shown in the pictures Condition and scope of delivery: Tsdpfx Ajzna N Eepdjd Used, optical condition as shown in the pictures. Scope of delivery: Vötsch VC³ 4018-M, 3 insert racks, operating manual, SIMPATI® license documents, certificate of authenticity Accessories as shown in the pictures. Items not explicitly mentioned are not included in the offer. Shipping by freight forwarder possible by arrangement. Subject to change, errors and prior sale.

Year of construction: 2021, condition: ready for operation (used), A traversing and modular measuring, logging and control system Mahlo for material quality control is available. Number of sensors: 6/frame, product materials: films/nonwovens/paper etc., thickness measurement with laser: sensor: Calipro DML-D, measuring range: 0mm-100mm, repeatability: +/-50µm. Basis weight measurement with x-ray: sensor: Gravimat FMX-T, repeatability (1sigma/1s): 0.1g/m², measuring gap: 60mm, maximum current: 1mA, maximum voltage: 40kVp. Documentation available. An on-site inspection is possible. Tjdpjy Equtsfx Apdsd

Condition: used, Vötsch Temperature testing chamber / Climate testing chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system features a programmable controller, a stainless steel test chamber, air cooling, and a side access for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Device type: Temperature testing chamber / Climate testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 5.44 K/min Temperature change rate, cooling: approx. 4.81 K/min Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Standing pressure: 15 bar Permissible operating overpressure: 25 bar Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A External dimensions according to manufacturer's drawing (W × D × H): approx. 950 × 830 × 757 mm Weight: approx. 150 kg Test specimen access: approx. Ø 80 mm Equipment: Programmable controller Temperature control Air-cooled design Stainless steel test chamber Side access for test specimens RS232 interface RS485/RS422 interface Digital I/O Potential-free contact Program operation and manual operation Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition as shown in the pictures With signs of wear and tear due to age and use Scope of delivery: 1x Vötsch VT 7004 temperature testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: Tsdpoz R Nrzsfx Apdsd 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Year of construction: 2005, condition: refurbished (used), We are offering this ZwickRoell 1484 200KN tensile and compression testing machine, manufactured in 2005, which has undergone a complete overhaul. Manufacturer: ZwickRoell Model: 1484 Year of manufacture: 2005 Condition: refurbished Category ID: 407 Machine type: 200KN tensile and compression testing machine Types of tests: Tensile and/or compression Tsdpfx Ajzw N Hlspded Testing space: 2, top and bottom Capacity: 200KN Accessories: Included, in particular the mechanical grips The machine will be equipped with a new control cabinet with DOLI technology and testing software compliant with ISO 6892-1. If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Vötsch Temperature Test Chamber / Climate Test Chamber Vötsch VTS 7027-15 Temperature Test Chamber Temperature range from -70 °C to +180 °C Approx. 270 liters / Heating up to 15 K/min / Cooling down 15 K/min For sale is a used temperature test chamber from Vötsch Industrietechnik GmbH. The test chamber is suitable for rapid temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The unit features a programmable touch panel control, a large viewing window, a stainless steel test chamber, and side access ports for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-15 Device type: Temperature test chamber / Climate test chamber Test chamber volume: approx. 270 liters Temperature range: -72 °C to +180 °C Heating rate: approx. 18 K/min Cooling rate: approx. 18 K/min Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2 K Heat compensation at -20 °C: approx. 8,000 W Heat compensation at +20 °C: approx. 8,000 W Refrigerant 1: R404A Refrigerant quantity: 6.5 kg Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 2.3 kg Max. high pressure: 25 bar g Standby pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 16 kW Rated current: 31 A Cooling: Water-cooled version Cooling water inlet and outlet available Dimensions and weight: Test chamber volume: approx. 270 liters Internal dimensions (W × D × H): approx. 580 × 620 × 750 mm External dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to model series documentation: approx. 835 kg Equipment: Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Water-cooled refrigeration unit Interior made of stainless steel Large viewing window Test chamber lighting Side access ports for test specimens Stainless steel grid shelves Adjustable temperature limiter Main switch RS232 interface Power socket 220–240 V AC, max. 2 A Programmed operation and manual operation Application areas: Temperature testing Temperature cycling testing Environmental Stress Screening / ESS Material testing Todpfxez A U N Ts Apdsd Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of delivery: 1x Vötsch VTS 7027-15 Temperature Test Chamber Programmable touch panel Stainless steel inserts according to images Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: like new (used), BINDER FED 115 – laboratory dryer / heating chamber – like new condition For sale, a professional BINDER FED 115 laboratory dryer from the renowned German manufacturer, BINDER. Tsdpfxjz Da Uqs Apded The unit is in excellent condition, practically like new. It has not been used. The interior and exterior are very well preserved and show no signs of use. Technical specifications: * Manufacturer: BINDER * Model: FED 115 E2 * Chamber volume: approx. 115 liters * Maximum / nominal temperature: 300°C * Power supply: 230 V, 1N~ * Power: 1.60 kW * Rated current: 7.0 A * Frequency: 50/60 Hz * Temperature protection class: 2.0 * Made in Germany The FED model is designed for precise drying, heating, and thermal treatment of samples in laboratories, industry, and quality control. Condition: like new / unused. 8 units available.