Used insulating glass making machines for sale (116)

Condition: good (used), Year of construction: 2003, functionality: fully functional, working height: 500 mm, input voltage: 400 V, Lisec sealing robot VL-1N/20, year 2003, for double and triple units, consisting of following: RTVN-15/20VFE, inlet conveyor of sealing robot with glass unit measuring device (glass and frame) VL-1N/20, sealing robot, for sealing of double and triple units up to 52 mm total unit chickness and 3,5 x 2,0 m unit size Rbedpfx Asxxxbhohzjt DOS-1TH, dosing and metering station for polysulfide, will be completely overhauled prior delivery (new seals on base and catalyst pump, new material and hydraulic hoses, new check valves, new repair-kits on all needle valves, new mixing pipes)

Condition: ready for operation (used), Year of construction: 2012, Left-Right with loading conveyor Rodpfxowii Hlo Ahzsbt LBH 25 ARS RFVS-U FRS 25 -A year of manufacture 2012 - 2018 Butyleuse 05 (2)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, working height: 520 mm, input voltage: 400 V, power: 10.2 kW (13.87 HP), Equipment: documentation/manual, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2001, consisting of: - RTVN-15/25ST, extension conveyor for measuring section, belt type, year 2001 - RTVN-15/25MZ, measuring section for gas filling press, belt type, with height and length measuring as well as measuring of glass and spacer width, year 2001 - FPS-36/25U2T, gas filling press for Argon, spindle type, with shape filling option, the machine is already equipped with Sigmatek DIAS control system and LENZE servo motors and controllers, the machine also can do 4-sided step units (bottom 50 mm, front, top and rear 130 mm) year 2001 Redpfx Ahoxw H Dujzjbt - RTVB-15/25ST, press outlet conveyor, roller type, year 2001 The machine is in best working order and can still be seen in operation on appointment.

Condition: good (used), Year of construction: 2002, functionality: fully functional, automatic Lisec butyl application machine, left to right, year 2002, consisting of: Rbjdpfx Ahjrx Ryfezjt FRS-25Z, overhead frame conveyor for supply RZVS-25/25, frame lift (down to butyl machine level), including frame measuring device LBH-25AR, automatic butyl application machine, 2x7,5 kg butyl cylinder capacity, suitable also for Georgian bars RAVS-25/25, frame lift FRS-25A, overhead frame conveyor down to frame set section The machine is available from our stock in Hofkirchen/Austria. The machine can be seen on site on appointment.

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, working height: 3,000 mm, IGU Production - 2K Robotic Sealing - Versiegelungsautomat Lisec RTVB15/30 VFE VFL1F50/29 Rbsdevuhgiopfx Ahzet DOS-E

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, working height: 950 mm, conveyor belt speed: 833 mm/s, conveyor belt thickness: 7 mm, cylinder diameter: 190 mm, TECHNICAL DETAILS Working dimensions: 70 - 4000 mm Leg length: 5.0 mm to 12.0 mm Profile height automatic: 4.0 mm to 24 mm Profile height manual: up to 35 mm Butyl cylinder Butyl cylinder diameter: 190 mm Butyl cylinder length: 250 mm Butyl cylinder volume: 7.5 l Operating temperature butyl: 100°C to 140°C MACHINE DETAILS Working height: 650 mm to 950 mm Rsdpexur Awefx Ahzebt Conveyor belt height: 0 mm to 7 mm Conveyor speed: 5 m/min to 50 m/min Connected load: 5 kW Compressed air consumption (for 1 m × 1 m frame): 23 standard litres Air consumption when refilling butyl: 300 standard litres/min Pneumatic input pressure: 6.5 bar to 8.0 bar Pneumatic operating pressure: 6.5 bar Maximum butyl extrusion pressure: 280 bar Maximum operating pressure: 300 bar EQUIPMENT Butyl cylinder Conveyor belt Pneumatic system

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! 8 brushes, Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Rjdpfxeqc Udis Ahzjbt Glass thickness: 4-15 mm, Width: 2900 mm, depth: 1100 mm, height: 3400 mm.

Condition: good (used), Year of construction: 1997, Measuring device for determining the amount of gas in the insulating glass Dimension: Length: 280mm Width: 204mm Height: 180mm Weight: 5.7kg Rbsdpfxji Azc Aj Ahzot

Condition: good (used), Year of construction: 2007, Max. pane height: 2700 mm. Connected load: 400V AC/50Hz/3.1A Total length with inlet and outlet: approx. 7700 mm. Max. height: approx. 4200 mm. Rbedpfxexq Rp Is Ahzst Weight: 2550 kg. Condition: good, second-hand.

Condition: good (used), Year of construction: 1998, L-racks, support height from floor: 250 mm Max. glass loading height: 3210 mm Max. glass length: 6000 mm 5 rib elements per rack. Rbjdpfx Aoxpgbwehzot Construction/external dimensions: Width: 5120 mm Height: 3230 mm Depth: 1500 mm Weight: 1100 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Hot Press Machine • Using Purpose: Pressing Double Glass • Usable Glass Measures (max.) : Rjdpfx Aewdn S Ajhzobt a. Length : 2.000 mm., b. Width : 1.800 mm., • Voltage : 380 V., • Power : 31 (Kw), • Weight : 1360 kg (netto), • Dimensions(WxLxH): 2.080 mm. x 2.150 mm. x 1.600 mm.,

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear Rjdpfx Ahexgtqgozsbt

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MB440, Machine data: Manufacturer: Rjukan Metall Model: Masterbend MB440 Year of manufacture: 2001 This machine can process all common spacer profiles (aluminum, stainless steel, Chromatech ultra / TGI) using a single tool (without conversion). The machine bends three corners and assembles one corner with a connector. The unit is fully functional (a video can be provided upon request) and is available immediately. Rbodpfx Ahexdwphezjt Collection only in 92224 Amberg, no shipping. Inspection possible by prior appointment.

Condition: excellent (used), IM Very good condition. Rbedpfx Ajxcllujhzot

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CE Glass 2100mm vertical glass washing and drying machine. Rsdpfx Ahjxb N Rfjzsbt The machine is in a well-maintained and inspected condition, ready for immediate use. New water suction rubber, new bearings. Working direction: from right to left Max glass height: 2100mm Number of brushes: 4 (also for Low-e glass) Drying fan Stainless steel cabinet Water heating Background lighting Stop sensor The machine is fully inspected, cleaned and in perfect working order and can be viewed on our premises!

Condition: like new (used), Year of construction: 2007, Angle saw ECO INSTRUMENTS PDS Rjdpfxeiy Du Ds Ahzsbt Angle ranging from 45 to 90 degrees For precessing georgian bars and regular spacer bars Year of production: 2007 Excellent condition Functioning, tested Available immediately

Condition: excellent (used), Year of construction: 2008, 2-component extruder HDT HD Pro 6 Easy SI Year of production: 2008 (Overhauled in 2019) For Silicone Hydraulic Rodpfewngagex Ahzebt Very good and clean condition As is Available immediately

Condition: like new (used), Year of construction: 2007, Horizontal conveyor LISEC KFL-55/22 Maximum working width 2200 mm Motorized With castor rollers Rjdpfoiy Dh Hjx Ahzobt Total floor dimensions: L 5800 x W 2300 mm Year of production: 2007 Very good and clean condition Good working order, tested Availability immediate

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Rbodpfxow Tyk Io Ahzst

Condition: new, Year of construction: 2013, 4.Measurements: 1. Pre-modification; the present flatness accuracy of the substrate supporting surface and the linearity of the rubbing roll to the supporting surface are measured to determine the actual status 1.1.1. Measurement performed with and without a (largest) substrate 1.1.2. Measurement performed under process / ambient conditions 2. Post modification; the modified flatness accuracy of the substrate supporting surface and the linearity of the rubbing roll to the supporting surface are measured to determine the improved status 2.1.1. Measurement performed with and without a (largest) substrate 5. Ambient conditions: 1. Temperature: 20 ± 5oC 2. Humidity: 50 ± 25%RH 6.Acceptance: 1. Approval of design drawings by customer before supplier starts manufacturing 1.1. The design approval will not free the supplier of his obligations to fulfill all parts of the deliverable 2. Site Acceptance Test (SAT) 2.1.Complete modification delivered / installed / pre-tested 2.2.Delivery of documentation (technical drawings of modified parts) 2.3.Acceptance tests 2.3.1. Accuracy measurements post modification with and without the largest (glass) substrate 2.3.2. Demonstration functionality on substrate sizes; 2.3.2.1. 10pcs. 300x300x4.0mm 2.3.2.2. 10pcs. 800x800x4.0mm 2.3.2.3. 10pcs. 1,200 x 1,500 x 4.0mm 2.3.2.4. 10pcs. substrate variations such as 2.0mm and/or tempered Rbodpfjwam N Ssx Ahzot

Condition: good (used), Year of construction: 2013, Suction lifter with 4 suction plates Rbjdpfew Inzdox Ahzot Lifting capacity: 400 kg vertical / 400 kg horizontal Weight: 50 kg Width: 2000 mm Height: 1040 mm Depth: 200 mm

Condition: good (used), 8 storage locations, shelf width per shelf: 180 mm Shelf opening via push bar Glass shelf height: 340 mm Width: approx. 5000 mm Depth: approx. 3150 mm Rbodpfx Ajwvtb Tohzst Height: approx. 2370 mm

Condition: good (used), 8 storage locations, shelf width per shelf: 180 mm Shelf opening via push bar Glass shelf height: 340 mm Rbedpowvtc Dsfx Ahzst Width: approx. 5000 mm Depth: approx. 3150 mm Height: approx. 2370 mm

Condition: used, Year of construction: 2001, 3/N/PE - Electrical connection: 7 kW, 400 V/50 Hz Rjdpewvuwcjfx Ahzsbt Working direction: Right/left Maximum height: 3900 mm Width: 5400 mm Weight: 2105 kG

Condition: good (used), Year of construction: 1995, functionality: fully functional, input voltage: 380 V, overall weight: 1,900 kg, type of input current: three-phase, power: 10 kW (13.60 HP), Equipment: documentation/manual, Lisec bending machine BSV-45A (high speed bender with 20 seconds cycle time), 1995, including option for arc shape bending and air pressure increase fo steel bars, consisting of: BSV-45A, bending machine Rbjdpfx Ahsrtpizjzst APM-45, endless connecting device PM-45/4, 4-slot spacer bar magazin high speed bender 20 seconds cycle time including option for arc shape bending including option for air pressure increase to run steel bars including preparation for printer signal with frequency converter for 2 different speeds of profile saw The machine can handle aluminium spacer bars as well as steel profiles The machine is in full working order and comes with one bending tool for 16 mm aluminium/steel spacer bars.