Glass laminating line

Lisec

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 30,500 mm, total width: 4,000 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, space requirement length: 305,000 mm, space requirement height: 3,800 mm, Equipment: documentation/manual, Lisec IG line, year 2005/2007, running direction left to right, featuring maximum element dimensions of 4000 x 2500 mm, stepped units (front/rear/top 140 mm) with gas filling press and sealing robot: - RTVN-32/25WE, inlet conveyor of washing machine, year of manufacture 2007, 3.2 m Lajdpfx Anezfy Uvjuoc - RTL-25VN, washing machine with 6 brushes for Low-E glass, with hot water tank, sand filter and blower, partially overhauled, built in 2007, 3.3 m - RTVN-16/25ST, washing machine outlet conveyor, built in 2007, 1.6 - RSVN-38/25, frame set section, 3.8 m - RTVN-27/25, measuring zone for gas-filling press, built in 2005, 2.7 m - FPS-36/25US, argon gas-filling press, built in 2005, 4.1 m - RTVN-11/25ST, outlet conveyor 1 of gas-filling press, year of manufacture 2005, 1.1 m - RTVN-11/25ST, outlet conveyor 2 of gas-filling press, year of manufacture 2005, 1.1 m - APKV-4/25, combination of 4-track cork applicator and short-inlet conveyor if sealing robot with width scanning device for glass/frame, year of manufacture 2005, 1.6 m - VFL-1D/25, sealing robot for PS and SI (can seal unit with 2 different kinds of material), year of manufacture 2005, 8.0 m - DOS-1PS+SI, year of manufacture 2005 (located in front of the line, so does not count towards the total length) The total length of the line is around 30,5 m The machines are in very good condition and are available from our stock in Austria/Hungary. Gas filling press can be seen in our warehouse in Austria but the washer is currently still under reconditioning in Hungary.

Condition: used, Year of construction: 2004, 10 spindle system. Connected load: 380/400V/50Hz, 34 kW. Glass thickness: 3-60 mm. Lodowynzcopfx Anuoac

Condition: used, functionality: fully functional, LISEC PVB Lamination Line Composed of: Laedpoy I Sd Rjfx Anujc TERRUZZI Autoclave – Year 2007 Washing Machine LISEC HVM26B6 – Year 2015 White Room Mangle Dimensions 5500x2800 mm

Condition: good (used), Includes key for emergency stop switch Lasdpfx Aeyr Nidenusc Application: Lisec machines Width: 450 mm Height: 320 mm Depth: 80 mm Weight: 1774 g Condition: Good, second-hand

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Ledpfjra N A Nsx Anusac Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: excellent (used), Year of construction: 2006, 2-component extruder Originally built for Silicone, but used for Polysulphide Can be easily made to work with Silicone Hydraulic More technical information can be found attached as Tech. data file Lajdpfx Anjzdyvwsusc Excellent condition Good working order, tested As is Available immediately

Condition: excellent (used), Year of construction: 2007, Automatic spacer bar bending machine With profile magazine Possible to bend aluminum, steel and warm-edge (plastic) spacer bars Universal bending tool for aluminium up to 24 mm Lajdpfxezdynmj Anuec All shapes according to LISEC shape catalogue The kit includes a Domino A-100 ink-jet printer More technical information can be found attached as Tech. data file Very good and clean condition Good working order, tested See video As is Available immediately

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bavelloni glass washing machine 2 pairs of brushes two water circuits Ljdpsw Tripofx Anusac operational

Condition: good (used), Year of construction: 1995, Semi-automatic edge decoating system, Working height: 900 mm. Width: 1400 mm, Lsdpfxsridqxs Anusac depth: 1200 mm, Max. Height: 1490 mm (up to operating terminal), Weight: 180 kg.

Condition: good (used), Power supply: 24 VDC Application: Lisec machines (AKL) Width: 425 mm Lajdpfx Anezcvd Nsuec Height: 160 mm Depth: approx. 30 mm Weight: 1402 g Condition: good, second-hand

Condition: like new (used), GASTI Dogatherm 41 beaker filler. Manufacturer - Gasti-Verpackungmaschinen GmbH Type - Dogatherm 41. Buffer tank capacity - 100L. Volume minimum - 25ml. Volume maximum - 280ml. Capacity - 4500-8000 cups per hour. Can fill the following products - milk, drink cocoa, yogurt, buttermilk, cream, cream cheese, cottage cheese, pudding, fruit jelly, rice frutti, nutella, jam, etc. Extra chain with the machine and also a pallet with extra parts / spare parts. Extra fillinghead included. Lsdpfefddpvox Anueac Diameter of extra chain for goblets - 70mm. in diameter. HAD.20.

Condition: good (used), Version includes key switch Application: Lisec machines Width: 425 mm Laedpozb Enhsfx Anuoc Height: 30 mm Depth: 160 mm Weight: 1096 g Condition: good, second-hand

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 12,100 mm, total width: 2,300 mm, total height: 3,250 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Lisec gas filling press FPS-36/25US, year 2005, consisting of following components: RTVN-27/25MZ, measuring section for gas filling press FPS-36/25US, gas filling press for Argon Ledpezbdbmjfx Anusac RTVN-32/25ST, outlet conveyor 1 of gas filling press RTVN-22/25ST, outlet conveyor 2 of gas filling press RTVN-16/25ST, outlet conveyor 3 of gas filling press The line machine was working until dismantling date and will be available from current location end of June 2026.

Condition: as good as new (ex-display), For sale Laodpfx Anjh Uqibeusc Demag wheelblocks New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 43,000 mm, total width: 4,000 mm, total height: 2,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec insulating glass line 4500 x 2000 mm, year 1989/2007, consisting of following machines: - AKL-20V, edge grinding machine - RTVN-27/20WE, washing machine inlet conveyor - RTL-20B, washing machine with 6 brushes for low-e, including a sand filter and a hot water tank as well as a blower - RSV-38/20, frame set section - PSL-35/20V, assembling station - RTVN-16/20MZU2, measuring section for gas filling press - FPS-35/20U2B, gas filling press for Argon, can do assembling of 4,5 m long units, gas filling up to 3500 mm length - RTVN-11/20, outlet conveyor of gas filling press - UKL-35/23VA, tilt table for line discharge of 90° - KFL-35/22, horizontal glass conveyor - RTVN-16/20VFE, short inlet of sealing robot, including measuring device for glass and frame - VL-1N/20, sealing robot, including option for triple units - DOS-1PU, dosing and metering station, modified to PS Ledpfxsza Hckj Anueac - VLA-25/20, extension of sealing robot The machine is in very good condition and will be available by the end of June 2026.