Used high-pressure water jets for sale (72)

Year of construction: 2020, operating hours: 0 h, condition: as good as new (ex-display), High-pressure cleaning device, high-pressure rinsing device, high-pressure rinsing device with suction device on hot-dip galvanized and painted high quality steel frames with forklift lugs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction power - Petrol engines: for suction Honda GX390 8,8kW and for cleaning - Honda GX690 17,9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction power - Diesel engines: for vacuuming Yanmar L100 8,0kW and for cleaning Kohler KDW 1003 18,9kW Fsdpfxefdkb Ee Alqsgb high pressure pump 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium HIGH PRESSURE HOSE REEL: Type: manual hose reel Material: stainless steel Capacity: max. 50 m ½" High pressure hose Hose: 50 m ½" High pressure hose (Included) LOW PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: stainless steel Capacity: max. 35 m ¾" Low pressure hose Hose: 35 m ¾" Low pressure hose (Included) FUEL TANK: Capacity: approx. 13 l WATER FILTER: With washable cartridge and drain valve Filtration degree: 50 mesh IN THE SCOPE OF DELIVERY: Multifunction radio remote control IMET; - On / Off Motor; - On / Off bypass; - Electrical speed control +/-; - Emergency stop button; Battery charger for radio remote control; 300 o. 500 l water tank made of polyethylene; OPTIONAL ON REQUEST: 60 m ½" High pressure hose; Pulsation/booster pump; ACCESSORIES ON REQUEST: Kit STORZ for the connection to the water hyd

Year of construction: 2008, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 127 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 127 Working pressure: 600 bar Delivery rate: 66 l/min. Drive speed: 1500 rpm. Driving power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.700x1.000x1.300 mm Fgedpeh Uc Iuefx Alqob weight: approx. 1.300 kg Year of manufacture: 2008 Condition: In very good used condition.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The HDT50 in the hot water trailer version covers a pressure of 230 to 500 bar at a flow rate of 33 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, electrically operated hose reel, remote control, etc.. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- Fgedpfxehgbkuo Alqeb Model Pressure Flow rate HDT50-230 230 bar 80 Lpm HDT50-400 400 bar 40 Lpm HDT50-500 500 bar 33 Lpm General Specifications: ----- Max. Pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. water cooled Drive motor power: 37.3 kW Drive motor speed: 1900 rpm Tank capacity: 90 L Max. Fuel consumption: 11.0 L/h Loudness (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure jetting unit, high-pressure inbuilt cleaner mounted on a hot-dip galvanized and painted high-grade steel frame with forklift sleeves, suitable for installation in commercial vehicles. Similar to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Dry weight without water tank: approx. 300 kg Dry weight with 400 l water tank: approx. 320 kg Dry weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Power: 35 HP (26 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass On/Off - Speed control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage safety system to prevent the high-pressure pump from running dry with automatic shutoff. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control; - Engine On/Off; - Bypass On/Off; - Speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 300, 400, 500, or 800 l polyethylene water tank (with steel frame); OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to a hydrant; - UNI 45 kit; - Version with 2 high-pressure reels; - Mobile hot water generator 10 kW – 12 VDC; Fodpfof Arugex Alqegb - High-pressure spray gun kit with swivel joint and quick coupling; - High-pressure lance kit with fan nozzle 15° / rotating nozzle; - High-flow lance kit; - Rotating nozzle kit; - Twin-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; - Further accessories upon request

Year of construction: 1995, condition: good (used), Stationary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Delivery rate: 56 l/min. Drive speed: 1.475 RPM Drive power: 44 kW with SIEMENS 45 kW 3~motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm weight: approx. 1.115kg Year of construction: 1995 Condition: in good used condition. Fgedpfxjfl Dwmj Alqsb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CP22 belongs to the series of petrol-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tires with a parking brake on the rear axle and castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal parts with all-round side frames made of stainless steel. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with an electric starter. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm Fgodpfxjhga U As Alqjb CP22-500 500 bar 16 Lpm General specifications: ----- Drive motor: 2 cylinder 4-stroke petrol engine, electric start Drive motor power: 16.4 kW Drive motor speed: 3600 rpm Optional: with hand throttle Tank: 28 L Max. fuel consumption: 6.8 L/h Dimensions and weight: Standard: 1100mm x 750mm x 1080 mm (160 kg) Standard with tires: 1100mm x 1050mm x 1080 mm (170 kg) 400l version: 1300mm x 1120mm x 1250 mm (250 kg) 800l version: 1300mm x 1490mm x 1250 mm (280 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-Pressure Cleaning Unit, High-Pressure Jetting Unit, High-Pressure Built-in Jetting System on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 650 x 1,000 x 1,030 mm Unladen weight without water tank: approx. 250 kg Dimensions & unladen weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm & approx. 280 kg Dimensions & unladen weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm & approx. 300 kg HIGH-PRESSURE PUMP: - Manufacturer: COMET - Model: TW 13022S Premium ENGINE: - Manufacturer: Honda - Model: GX 690 - Fuel: Petrol - Cooling: Air - Cylinders: 2 - Displacement: 688 cm³ - Max. output: 24 hp (17.7 kW) - Max. engine speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL: - Ignition key - Hour meter - Electronic fuel gauge - LED indicator for low oil pressure - Emergency stop button INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump running dry, with automatic shut-off function. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a manometer. Fgedpfx Aodqmttjlqsb HIGH-PRESSURE HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 60 m ½” high-pressure hose - Hose: 50 m ½” high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL TANK: - Capacity: approx. 13 l WATER FILTER: - With washable cartridge and drain valve - Filtration: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine On/Off - Bypass On/Off - Electronic speed control +/- - Emergency stop button - Battery charger for remote control - 300, 400 or 500 l polyethylene water tank OPTIONS ON REQUEST: - 60 m ½” high-pressure hose - Pulsation/booster pump - Second high-pressure hose reel - Electric high-pressure hose reel (requires connection to vehicle battery) ACCESSORIES ON REQUEST: - STORZ kit for hydrant connection - UNI 45 kit - Mobile hot water generator 10 kW – 12 VDC - High-pressure spray gun kit, swivel and quick coupling - High-pressure lance kit with 15° flat jet nozzle / rotary nozzle - High-flow lance kit - Rotary nozzle kit - Twin-head nozzle kit - Water sandblasting lance kit - Detergent dispenser kit - Step cleaning device - Surface cleaner - Sludge suction device (Venturi) - Pipe cleaning nozzles - Further accessories available on request

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: W6378-04A, Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but not Hammelmann, Woma, Kamat Perm. operating overpressure: 50-200 bar Recommended delivery rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10,9 kg with MADER PEU-063-0010-I-P-M Year of construction: 2012 (unused) Demineralized water: Suitable for operation with demineralized water. Electro-pneumatic control: Accepts the switching command and the pressure setting of the valve. Fgsdpfod D Aghex Alqob Gap seal: Serves for exact reproducibility of the response pressure. Further technical data see data sheet. Keeps the operating pressure constant regardless of the nozzle configuration. Suitable for long-term overflow operation. Excellent dynamic behaviour with rapid flow changes. Special features: Very high response reproducibility, high response dynamics, cone can be used on both sides.

Condition: used, Year of construction: 2021, operating hours: 1,231 h, functionality: fully functional, total width: 720 mm, total length: 950 mm, total height: 800 mm, pressure: 500 bar, operating pressure: 450 bar, type of input current: three-phase, overall weight: 175 kg, high-pressure hose length: 20,000 mm, volume flow: 0.96 m³/h, empty load weight: 175 kg, input voltage: 400 V, hose length: 20,000 mm, High-pressure washer/sandblaster DENJET CE 20 COMPACT 500 - Pressure: 500 bar - Flow rate: 16 l/min - Power supply: 15 kW - Voltage: 400 V - Current: 28 A - 20 m wear-resistant high-pressure hose with ½” BSPP female swivel couplings (extension hose). Fgjdpsyak Tysfx Alqsb - 15 m oil-resistant 4-core electric cable. - Dry shut-off trigger gun with 0.85 m stainless steel lance. - Straight jet nozzle - CEE electric plug. - Rotating nozzle. - Sandblasting kit with boron carbide nozzle. - Mobile abrasive container. - Personal protective equipment: helmet with eye protection, waterproof coverall, protective apron rated for up to 1000 bar, protective boots size 43.

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: C3.00202.1212, total width: 1,000 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,740 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 254 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 202 mounted on a base frame. Similar but not Kamat, Uraca, or Woma. Pump type: HDP 202 Operating pressure: 340 bar Flow rate: 254 l/min Drive speed: 1500 rpm Drive power: 157 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x1000x1450 mm Weight: approx. 1740 kg Year of manufacture: 2023 Condition: In January 2026 new piston seals were installed and valves checked. In very good used condition. Fgjdpoyacaxefx Alqob

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Fedpfx Aeyablmelqogb Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: good (used), Heavy duty high pressure washer. Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Fsdpfoh Rkilox Alqogb Delivery is available.

Year of construction: 1998, condition: good (used), machine/vehicle number: 98.01112.1773, Stationary high pressure pump unit Hammelmann HDP 122 on base frame without engine. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 530 bar Delivery rate: 55 l/min. Drive speed: 1500 rpm. Driving power: 55 kW without motor, with pressure control valve, Fgjdpfx Aljgz H Akjqeb with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm weight: approx. 300 kg year of construction: 1998 Condition: in good used condition.

Year of construction: 2020, operating hours: 0 h, condition: as good as new (ex-display), PTC JTR-C cold water trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... - Single-axle trailer on hot-dip galvanized frame with support foot with wheel, parking brake, automatic reverse, stands, rear lights and reflectors, towing eye for 50 mm coupling, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min at 210bar | Engine: Kohler KDW 2204 37,5kW JTR-C 84/190 | 84l/min at 190bar | Engine: Kohler KDW 2204 37,5kW JTR-C 102/150 | 102l/min at 150bar | Engine: Kohler KDW 2204 37,5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Empty weight: approx. 600 kg Fgsdpfsfdkbgox Alqjb - High pressure pump: HPP - HD-reel: fixed and manual or hydraulic with max. 100 m 1/2" and 60 m. 3/4" hose (included) - Water supply reel: manual with 50 m. 3/4" hose - water tank: 600 l - Options such as radio remote control, warning light, work light and accessories on request

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC850™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 85 cm and a 250-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC850™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC850™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 85 cm - Heated tank with a capacity of 250 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 180 kg - External dimensions - Open chamber (W x D x H): 135 x 110 x 195 cm - External dimensions - Closed chamber (W x D x H): 135 x 110 x 140 cm - Rotating basket diameter: 85 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 250 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 Fgedpfou Srrhsx Alqsb - Declaration of conformity: CE

Condition: new, Year of construction: 2025, overall weight: 230 kg, water tank capacity: 110 l, Workshop Cabin Washer, constructed from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use in various industries and automotive applications. It is used to remove heavy dirt without damaging the surface of the cleaned element. Operates in a closed-loop system at temperatures up to 45°C. The working table width is 150 cm. The washer is equipped with a 110-liter tank that can be optionally thermally insulated to prevent the heated fluid from cooling too quickly. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner fluid, which, combined with the appropriate temperature and pressure from the spray gun nozzle, effortlessly removes all kinds of dirt. Standard equipment includes a high-pressure lance up to 140 bar, a compressed air gun, and a low-pressure overflow brush. The washer chamber is pneumatically lifted, with adjustable height, bright lighting, and air ventilation for the window to ensure user convenience. The design and construction of the Master Cleaner MC 1500 adhere to the highest quality standards, ISO 9001, and environmental protection standards, ISO 14001. It is ideal for removing dirt from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is equipped with a dedicated oil separator that effectively removes oil contaminants from the water in the washer’s tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Compressed air gun: up to 8 bar - Air ventilation for the viewing window - LED lighting - Pneumatic chamber opening mechanism - Heated 110-liter tank - Dual liquid filtration system - Oil separator - Liquid level and temperature sensors - Adjustable height feet: up to 100 mm - Dual foot switch - XPOWER Active Cleaner (5L starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotary nozzle - Manifold cleaning nozzle - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: - Weight: 230 kg - External dimensions - Open chamber (W x D x H): 175 x 85 x 235 cm - External dimensions - Closed chamber (W x D x H): 175 x 85 x 170 cm - Chamber dimensions (W x D x H): 150 x 64 x 65 cm - Heated fluid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic power supply: 6 - 8 bar - Maximum power: 7.5 kW - Operating pump pressure: 140 bar - Dual liquid filtration system: Yes - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual foot switch: Yes - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 Fgodori Rn Uopfx Alqob - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE - CONTACT US TO LEARN MORE.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Fgodpjfzrapsfx Alqsb • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Year of construction: 2007, operating hours: 5,573 h, functionality: fully functional, operating pressure: 1,200 bar, power: 122 kW (165.87 HP), pump capacity: 40 l/min, Equipment: type plate available, FALCH type T12, year of manufacture 2007, machine output 122KW/1200BAR/40 litres per minute. The unit is fully functional, featuring a bypass modification from water to air and a refurbished external machine cover. Supplied with basic equipment: control gun with rotary nozzle, control cable, and 20m high-pressure hose. Fgsdpfsxyx Evsx Alqjb

Condition: good (used), Year of construction: 2007, operating hours: 9,953 h, functionality: fully functional, total width: 2,440 mm, total length: 7,150 mm, total height: 2,590 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 12,500 kg, rotational speed (max.): 1,700 rpm, water tank capacity: 1,600 l, empty load weight: 12,500 kg, power: 480 kW (652.62 HP), water pressure: 1,000 bar, cubic capacity: 15,874 cm³, pump capacity: 193 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 362 in a BDF / WAB container. Similar, but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 362 PRESSURE STAGE 1: Fsdpfx Aswz Ekqolqsgb Operating pressure: 1000 bar Flow rate: 193 l/min Switching valve for 4 consumers, each with separately adjustable pressure. Drive speed: 1700 rpm Plunger: d50 mm Drive power: 360 kW With 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine With workshop and changing room. Dimensions LxWxH: approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of manufacture: 2007 Operating hours: 9953 h (machine hours) Condition: The high-pressure pump is in good used condition.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically driven high pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 Fgedpfxshga Rxo Alqob 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. Fedpfxehga S Ds Alqsgb CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General specifications: ----- Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: Fedpfx Aljhgblkoqogb ----- Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: like new (used), Falch Trail Jet 15, 300 bar, 24 l/min, 305 operating hours Fodpfx Ajwlkruolqsgb

Year of construction: 2013, operating hours: 1,300 h, condition: reconditioned (used), Skid similar but not Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year 01/08) - Engine: electric 30kW - 1250l water tank - pressure gauge - pressure regulator - safety valve - Steel frame powder coated - Aluminum covers - Forklift lugs and crane eyes Fedpjg Tm N Asfx Alqegb - Dimensions with 1250l water tank: approx. 1.100 x 1.760 x 1.770 - Empty weight: 1.085 kg - Year of construction: 2013 - Operating hours: approx. 1500 h Condition: high pressure pump 06/2022 overhauled. In very good used condition.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Fgodpfx Alshga Ireqeb Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Standard accessories included.