Störi Mantel s.r.o.

Condition: new, Year of construction: 2024, Functionality: fully functional, warranty duration: 12 months, The SMPA 2.ED automatic picking machine is designed for picking single-operation 2-way and 4-way pallets. The capacity of the machine is 1-2 pallets per minute. As standard the machine is equipped with a universal template for the preparation of the upper and lower part of the pallet. The picking process itself operates on the principle of electromechanical drive (two linear actuators) with minimal power consumption. The picking machine can work independently or can be integrated into an automatic palletising line with pallet processing and stacking. The machine is operated by two operators. - Collecting of two-way and four-way pallets. - The capacity of the picking machine is 500 pcs / shift (8 hours). - The machine is operated by two workers. - Universal template (basic equipment). More types of pallets can be produced on this template, thanks to the simple adjustment with an Allen key. The basic layout is set according to the customer's wishes or for a classic pallet design (e.g. EUR). - Pallet width 600 mm - 1200 mm (optionally up to 1500 mm without preparation of the bottom part of the pallet-leg and without the possibility of further processing of the pallet in the processing line) - Pallet length 600 mm - 1500 mm (optionally 2000, 2500 and 3000 mm) Gijlhcdjubbu Ujwxst Machine equipment: - 3 boxes for loose nails, each with 10 pins - the number of boxes can be extended to 4 pieces with 2 x 10 and 2 x 12 pins. Depending on the design of the pallet. - 26 pieces of hammers (8 x small hammer for nails 23-50 mm long, 18 x large hammer for nails 50-90 mm long) - hammers can be expanded (up to 44 pieces) depending on the number of boxes and outlets and on the pallet construction. - Universal template for preparing the top and bottom of the pallet Nails for the nailing machine: - All available loose nails on the market with a length of 23 - 90 mm can be used, including EPAL nails. - The accuracy of the nailing pattern is within +/- 1 mm. - The minimum nail spacing is 25 mm. Working procedure on the SMPA 500.2 ED nailer The SMPA 500.2ED pallet making machine uses a system of picking the finished pallet and preparing the legs on a common table. Pallet picking procedure: 1. The cubes and the pallet bottom plates (legs) are placed in the template in the working position on the left side of the table. 2. In the working position in the right part of the table, the prepared lower parts of the pallet (legs) are folded into the second template, on which the operator stacks the pallet cubes and longitudinal plates. 3. After placing the material in both positions, the operator presses the start button and the machine automatically performs the appropriate number of picking strokes according to the pallet being produced. 4. After the picking cycle, the finished pallet remains in the output section of the machine and the operator can remove it manually or the pallet goes fully automatically to the next operation within the palletising line. 5. The pre-prepared lower parts of the pallet (legs) are returned to the starting position and the whole cycle is repeated.

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 450 mm, cutting length (max.): 6,200 mm, power: 15 kW (20.39 HP), saw blade diameter: 550 mm, total length: 8,100 mm, overall weight: 2,700 kg, height adjustment type: mechanical, type of input current: three-phase, motor voltage: 400 V, frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 160 mm, working height: 850 mm, type of motor: three-phase motor, worktable width: 450 mm, compressed air connection: 6 bar, warranty duration: 12 months, The basic model of the FLS technology is the FLS ECO 120. The saw is mainly used in small and medium-sized operations focused on various wood processing, but also non-wood materials. The FLS ECO 120 single-spindle saw significantly increases work efficiency and material yield (by 10-15%) and can process prisms, beams, prisms and large-area material. The input material can be plastered, dimensioned, formatted, cut to length and slats can be produced. The maximum cutting height is 120 mm, optionally 160 mm. The saw can be operated by one worker. The machine complies with the stringent occupational safety requirements of the relevant EC regulations and directives. The infinitely variable blade feed and stroke control guarantees a clean cut and high cutting performance. Thanks to the "ProLock" quick-release system, saw blade replacement is easy and, above all, safe. The saw carriage is equipped with guide and side rollers that ensure optimal guidance of the floating unit during cutting without unnecessary vibrations. The upper pressure plate and the wooden adjustable stop ensure a firm fixation of the material during cutting and thus eliminate unwanted movement. The FLS technology is unique in its quick and easy adjustment via ergonomically positioned touch panel controls. Cut width values are entered manually or by using the basic Absolut program or the optional Chain and Optim programs. The cutting path is displayed on the material by a laser beam and then guided longitudinally by a sliding saw blade. Giolhcdwoubbubsxot The FLS can be used to cut prisms, squares, beams and large-area material. The input material can be plastered, dimensioned, formatted, mitred and mitre cut, grooved or cut into sections and slats. Manufacturers of grout and solid furniture or staircases will find their own. The machine can also be used for cutting non-wood materials such as PUR/PIR panels, plastic materials, sandwich, aluminium or cement board.

Condition: new, Year of construction: 2024, Functionality: fully functional, power: 11 kW (14.96 HP), saw blade diameter: 600 mm, feed length X-axis: 6,200 mm, overall weight: 2,300 kg, height adjustment type: pneumatic, type of input current: three-phase, motor voltage: 400 V, frequency: 50 Hz, hole diameter of the disc: 80 mm, extraction nozzle diameter: 120 mm, working height: 900 mm, type of motor: three-phase motor, compressed air connection: 6 bar, warranty duration: 12 months, The KP 900 Automat is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 27-30 m3 of pallet cross-section per shift (8 hours) or about 20 thousand pieces of blocks for pallet production, depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the material being processed, which is manually loaded into the machine. Basic cutting modes 1. Manual mode Each cut length is set by moving the material using the buttons on the panel, or by setting the length value on the control panel dial. Start the cut by pressing the button on the display. This method of use is suitable for single sequential cuts. 2. Automatic mode a) Set one cut dimension for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to this set value. When the cut is complete, the loader will go back to the preset value of the input material length. This mode is suitable for the production of pallet cubes. The advantage is the quick changeover between values when the input material changes frequently. b) Set the desired combination of cut dimensions for the entire length of the input material. When the pedal starts cutting, the entire material is automatically cut to these length combinations. When the cut is complete, the loader will go back to the preset value of the input material length. Up to 10 programs with 10 lengths can be stored in the machine memory. Programs are very easy to overwrite, edit, insert or delete. Use this mode to achieve high material yields and is particularly useful in the production of cuttings for a wide range of packaging products. In automatic mode, automatic front and back trimming can be set. In the basic version, the saw is LEFT orientation, i.e. the material flow is from right to left. An automatic loading system is included in the basic configuration of the saw. It is a pusher device that moves on a precision linear rail with bearings. This design ensures long life of the linear guide and very precise positioning of the workpiece in the cut. The integrated side and top pressure ensure a firm fixation of the material during the cutting process, both to the work table and to the back support. This ensures that the cut is always precise, perpendicular and avoids unwanted material movement. The clear LCD touch screen allows easy and comfortable operation of the machine. The individual controls are clearly visible, do not tire the operator's eyes and provide a perfect overview. Maximum ergonomics and designed software ensure the operator complete control over the machine. A work table at the infeed before the cut allows the operator to conveniently sort and prepare the material, which is then moved to the loading area. This eliminates downtime in the operation of the saw and strenuous material handling. The table has a tilt of 8° and is equipped with a safety flap at its end to prevent accidental pushing of the material out of the operator's reach. The basic fixed table at the outlet behind the cut is two metres long and partly under the cutting area cover. The operator can remove the cut material in complete safety, without being endangered by any cuttings, chips or risk of injury from the cutting wheel. The inclination of the table is 8°. Golhceubbtkodwxeit