PIMM-used

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of production - 2007 Control - CC 200 Closing unit: Closing force [kN] - 400 Clamping plate dimensions (hxv) [mm] -550 x 430 Min./max. mold height [mm] min -180 Maximum opening width [mm]- 530 Injection unit Screw diameter [mm] -30 Injection volume [cm3]- 99 Injection pressure [bar]- 1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight: Net weight with control cabinet [t]- 2.7 Dimensions (length x width x height) [m] -3.26m x 1.2m x 1.8m Klslhccjwa S Uaoqlsr

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 300-2000 CX- Hybryd injection molding machine Year of production -2019 Number of operating hours - 19,000 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 19" control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 70 mm, with a non-return lock and an open nozzle Closing unit - Mold closing force: kN 3000 - Mold opening force: kN 169 - Dimensions of the mounting plate (h x v): mm995 x 1050 - Clearance between columns (h x v): mm630 x 630 Increased width of the mold mounting plates and increased horizontal clearance between columns KM 300 by 80 mm; Clearance after enlargement: 710 x 630 mm ( h x v) - Mold opening stroke: mm820 - Minimum height mold:mm330 Increased by 150 mm min. mold height and max. opening width - Opening width: mm1150 - Ejector stroke: mm200 - Ejector force forward/backward: kN 58/28 Injection unit Klelhccswa S Imsqlsr - Screw diameter:mm 70 Thermoplastic HPS-UN screw for high-performance applications - 70 mm Screw drive by electric motor for independent and energy-saving plasticization during mold opening and closing - Ls/D ratio: -20.0 - Injection pressure:bar 1877 - Injection volume:cm3 1078 - Injection weight 1): g 981 - Injection speed: mm/s100 - Injection efficiency:cm3/s385 - Screw speed, standard:rpm220 - Efficiency plasticization 1): - at standard screw speed: g/s 75.8 Pressure tank for increased injection power switched off by machine control Additional pump for hydraulic ejector and core function. For parallel movements of hydraulic elements during mold opening and closing, as well as pressure maintenance function for hydraulic cores. Electric-hydraulic equipment - Nominal power of the pump motor:kW 55 - Installed power of the heaters:kW 29.2 - Number of cylinder heating zones: -6 - Dry cycle time / stroke according to Euromap 6 2) :s/mm 2.7 / 441 - Oil tank capacity: dm3 720 Dimensions and weight - Net weight with control cabinet: t 20.1 - Machine dimensions (length x width x height) 3):m 6.55 x 2.17 x 2.25

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 650/150 injection molding machine Year of manufacture - 2005 Clamping system Clamping force: 1500 kN Plate size h x v: 750 x 750 mm Min. installation height: 300 mm Maximum plate distance: 900 mm Opening stroke: 600 mm Ejector stroke: 150 mm Ejector force: 61 kN Centring of moving platen D: 160 mm Centring of fixed platen D: 160 mm Mould weight: 1800 kg Injection system Screw diameter: 45 mm Stroke volume: 318 ccm Kljlswa S Dzshccqlor Injection pressure: 1525 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 290 min Screw torque: 5 N Plasticizing flow: 55 g/s PS Number of heating zones: 5 Dimensions and weight Machine dimensions LxWxH: 5.5m x 1.7m x 2.4m Total weight: 9500 kg

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 35 - 100 CX injection molding machine Year of manufacture - 2007 Closing system : Clamping force: 350 kN Mould opening force, max.: 39.9 kN Moving platen feed force Opening: 21.6 kN Moving platen feed force Closing: 16.7 kN Mould platen size (h x v): 540 mm x 540 mm Distance between connecting rods (h x v): 320 mm x 320 mm Mould opening stroke: 350 mm Min. mould height: 175 mm Max. daylight: 525 mm Klolhjwa Szgjccqler Hydraulic ejector - stroke: 100 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit : Screw diameter: 22mm Ls/D ratio: 26 Injection pressure: 2500 bar Injection volume 38 ccm Injection weight, PS: 35 g Injection speed: 59 ccm/s Screw speed: 365 1/min Tank capacity: 215 ltr. Dimensions and weight Machine dimensions: 3.50 m x 1.50 m x 2.00 m

Condition: excellent (used), Year of construction: 2004, Arburg 420C 1000-250 injection molding machine Year of production: 2004 Injection elements: Klslewa Sx Eohccqlsr Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Injection volume: 188 ccm Closing elements: Closing force: 100 t Clearance between columns: 420x420 mm Table plate dimensions max: 570x570 mm Ejector: hydraulic Closing system: hydraulic Control: SELOGICA Dimensions: Weight: 3660 kg Length/Width/Height: 4.30x1.64x2.08 m

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 160-380 CX injection molding machine Year of production - 2005 Number of operating hours - 34,200 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and 3 built-in USB ports. Plasticizing system A complete plasticizing system for thermoplastics in the version with abrasion protection, with a screw diameter of 40 mm, with a non-return lock and an open nozzle TECHNICAL DATA OF THE MACHINE IN STANDARD VERSION Closing unit - Mold closing force: kN 1600 - Mold opening force: kN 86.4 - Dimensions of the mounting plate (h x v): mm 820 x 845 - Clearance between columns (h x v): mm 520 x 520 - Mold opening path: mm 650 - Mold installation height: mm 300 - Plate opening stroke: mm 950 - Ejector stroke: mm 150 - Ejector force: kN 22.6/9.9 Injection unit - Screw diameter: mm 40 - Pressure injection: bar 1860 - Injection volume: cm3 201 - Injection weight for PS: g 183 Kljlhewa Svkeccqler - Number of screw revolutions, standard, option: rpm 390/490 Electric-hydraulic equipment - Nominal power of the pump motor: kW 22 - Installed power of heaters: kW 10.97 - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 1600 - Oil tank capacity: l 489 Dimensions and weight - Net weight with control cabinet: t 6.0 - Machine dimensions (length x width x height): m 4.6 x 1.6 x 2.1

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 50-380 CX injection molding machine Year of production - 2010 Number of operating hours -: 62135 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasive protection, with a screw diameter of 35 mm, with a non-return lock and an open nozzle Tool closing system: - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Mould mounting plate movement force - - -- opening: kN 21.6 -- closing: kN 16.7 - Mounting plate dimensions (h x v): mm 600 x 600 - Clearance between columns (h x v): mm 370 x 370 - Mold opening path: mm 400 - Mold installation height: mm 200 - Plate opening stroke: mm 600 - Ejector stroke: mm 100 - Ejector force: kN 22.6/9.9 Unit injection - Screw diameter: mm 35 - Injection pressure: bar 2429 - Injection volume: cm3 154 - Injection weight for PS: g 140 - Screw speed, standard, option: rpm 295/375 Equipment: Klelhcjwa Si Dscqljr - Number of cylinder heating zones: - 5 - Number of dry cycles according to Euromap: 1/h 2900 - Oil tank capacity: 1 220 Power supply: - Nominal power of the pump motor: kW 15 - Installed power of the heaters: kW 10.97 Machine dimensions and weight: - Net weight with control cabinet: t 3.0 - Machine dimensions (length x width x height): m 3.8 x 1.4 x 2.0

Condition: excellent (used), Year of construction: 2005, BOY 22A injection molding machine Year of production: 2005 Vertical / horizontal machine Technical data Screw diameter: 22 mm Injection volume: 30 ccm Weight: 28.45 g Injection pressure: 1732 bar Closing force: 220 kN Tie bar spacing: 254 mm Plate size: 220 x 400 mm Min mold height: 200 mm Opening stroke: 200 mm Max plate spacing: 400 mm General Installed power: 9.05 kW Operating hours: 21,600 h Ksljwa Sbyohccqlelr Dimensions: Weight: 880 kg Equipment Monitor language: German

Condition: excellent (used), Year of construction: 2003, Arburg 221 K 350 - 100 injection molding machine Year of manufacture: 12/2003 Horizontal/vertical machine - stand-up unit Control type: Selogica Closing system: Knee TECHNICAL DATA Kslhcjwa R T Iocqlslr Closing force: 350 kN Clearance between columns: 221 mm Plate dimensions: 324 mm x 250 mm Mould size: min 150 mm - 300 mm Maximum opening stroke: 200 mm Max distance between plates: 350 mm - 500 mm Screw diameter: 20 mm Injection volume / Injection weight: 31 ccm / 26 grams PS Injection pressure: 2400 bar GENERAL DATA Engine: 7.5 kW Heaters: 3.5 kW Operating hours: approx. 47,000 h Dimensions L x W x H: 2.7 m x 1.4 m x 1.7 m Weight: 1150 kg

Condition: excellent (used), Year of construction: 2016, ENGEL Duo 4550/500 WPX injection molding machine Year of production - 2016 Viper 40 robot CC 300 control Klslhccqowa Ebmslsr Closing system: Tie bar spacing - 990/1130 mm Min/max mold height - 450/1140 mm Opening stroke - 1400 mm Injection system: Closing force - 5000 kN Injection pressure - 1600 bar Screw diameter - 105 mm Injection volume - 3377 ccm Injection weight - 3073 g Core - 4 pieces on fixed plate Core - 4 pieces on fixed plate Pneumatic cascades - 10 pieces Hot runner control 40 zones

Condition: ready for operation (used), Year of construction: 2012, Haitian Mars 4700/2250 injection molding machine Year of production -2012 Wittmann W 832-2012 robot X axis -900 mm Y axis -1600 mm Z axis -3000 mm Klslhccqowa Dr Djljr Closing system: Clearance between columns - 800/820 mm Min/max mold height -320/780 mm Opening stroke - 1560 mm Injection system: Closing force - 4700 kN Injection pressure - 2110 bar Screw diameter - 65 mm Injection volume - 1068 ccm Injection weight -972 g Equipment: 2x core - moving plate

Condition: excellent (used), Year of construction: 2008, Demag System 1500/1500-16000 injection molding machine Year of production - 2008 Wittmann W 753 robot - 2008 Cage and conveyor Closing unit Closing force [kN] 15000 Clamping plate dimensions (hxv) [mm] 2150 x 1880 Clearance between columns (hxv) [mm] 1500 x 1250 Min./max. mould height [mm] 700 - 1400 Maximum opening width [mm] 2900 Injection unit Screw diameter [mm] 145 Injection volume [cm3] 10981 Injection weight [g] 9880 Injection pressure [bar] 1454 Electric-hydraulic equipment Pump motor rated power [kW] 165 Heater power [kW] 97 Dimensions and weight Klolhccqjwalvdslor Net weight with control cabinet [t] 74000 / 21000 Dimensions (length x width x height) [m] 14.4 x 3.4 x 2.9

Condition: ready for operation (used), Year of construction: 2008, Demag System 800/1120-9500 injection molding machine Klelhccqev T A Hhelor Year of production - 2008 Closing system: Closing force: 8000 kN Plate size (h x v): 1620 x 1500 mm Gap between columns (h x v): 1120 x 1000 Mold height min-max.: 500 - 1050 mm Maximum distance between plates: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Mold weight: 7200 kg Injection system: Screw diameter: 130 mm Stroke volume: 7300 ccm Injection weight (PS): 6640 gr Injection pressure: 1300 bar Screw length: 20 l/d Electric-hydraulic equipment: Pump motor rated power [kW] 110 Heater power [kW] 79 Oil tank capacity (L): 1300 Dimensions and weight: Machine dimensions LxWxH: 12.3 m x 2.7 m x 2.7 m Total weight: 33500 / 9700 kg

Condition: ready for operation (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Controller version: MC 4 Number of operating hours 93,900 Closing unit Clamping force: 23000 kN Klelhov T Aw Tsccqler Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Max. mould height: 1800 mm Max. daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Sweep volume: 8588 ccm Injection weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143000 kg Maximum mold weight: 62000 kg LRX 1000 robot X-axis - 2000 mm Y-axis - 3000 mm Z-axis - 5000 mm

Condition: excellent (used), Woojin Plaimm TE50 IE 70 injection molding machine Year of production 2020 3 machines available Screw diameter fi 22 mm Injection pressure 2184 bar Injection volume 34 cm3 Kelhsv T Aghsccqljlr Spacing between columns 360 X 360 weight 3,600 kg dimensions 4.0x1.3x1.6 m

Year of construction: 2021, Condition: excellent (used), Wanner Xtra 2-A slow-speed mill with toothed roll 2015 - 2 pieces 2017 - 1 piece 2019 - 1 piece 2020 - 8 pieces 2021 - 8 pieces Technical data Cutting chamber opening: 260 x 260 mm² Rotor knives: 3 pieces Pre-breaker: 2 pieces/3-notches Rotor speed: 32/min Tooth module: 4 mm, alternatively 5 mm Motor power: 1.5 kW Kelhev Tzz Rsccqlelr Power supply voltage: 400 Volt/50 Hz Weight (Standard): 230 kg Dimensions (LxWxH cm): 99 x 40 x 110 Controller: Controller with contactor with 5 m cable

Condition: excellent (used), Year of construction: 2018, THERMOSTAT PIOVAN THW12 Year of manufacture -2018 Kelhccov Sz Nroqlelr Maximum temperature 90°C Cooling medium water Heating power 12kW Power of pump C 0.75kW Maximum pump capacity C 40 l/min Maximum pressure C 60m Dimensions 400x867x1000mm Weight 20kg

Condition: like new (used), Plasticizing system Krauss Maffei CX machine screw diameter 50 mm injection volume -432 ccm Kelhcev R Ucpscqlslr injection weight -393 g practically new - used for testing in the tool shop

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Engel ES 80-25 HL-V injection molding machine Year: 1999 ES .../25 HL-V injection unit Screw diameter: 22 mm Specific injection pressure: 1590 bar Injection volume: 38 ccm Injection weight: 41.75 g ES 80/... Hl-V tool closing system Closing force: 25 t Tool plate dimensions: 470x280 mm Clearance between columns: ... mm Tool height: 480 mm Max. Kjlsv R Txvehccqlolr Plate distance : 150 mm Pump motor power : 5.5 kW Cylinder heating band power : 5.3 kW Machine dimensions : 2.8 m x 1.1 m x 1.9 m Weight : 1,800 kg

Condition: new, Year of construction: 2023, Krauss Maffei KM 80-380 CX injection molding machine Year of production: 2023 Fully hydraulic closing system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5” control panel with a color touch screen. Plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 40 mm, with a return lock and an open nozzle Nozzle radius 10 mm, nozzle opening 4 mm TECHNICAL DATA OF THE MACHINE IN STANDARD DESIGN Closing unit - Mold closing force: kN 800 - Mold opening force: kN55 - Dimensions of the mounting plate (h x v): mm 670 x 670 - Clearance between columns (h x v): mm420 x 420 - Mold opening stroke: mm500 - Minimum mold height mm250 - Opening width: mm750 - Ejector stroke: mm150 - Ejector force up to forward/backward:kN23 / 10 Injection unit - Screw diameter:mm40 Kolhccjv Raineqljlr - Ls/D ratio: - 20.0 - Injection pressure:bar 1860 - Injection volume: cm3 201 - Injection weight 1):g183 - Injection speed: mm/s100 - Injection efficiency standard: cm3/s126 - Screw speed, standard: rpm 295 - Plasticization efficiency 1): - at standard screw speed: g/s 21.8 Electric-hydraulic equipment - Pump motor nominal power: kW 15 - Installed heater power: kW 10.9 - Number of cylinder heating zones: - 5 - Dry cycle time / stroke according to Euromap 6 2) : s/mm 1.7 / 294 - Capacity hydraulic oil tank: dm3280 Dimensions and weight - Net weight with control cabinet: t 3.55 - Machine dimensions (l x w x h) 3): m 4.09 x 1.48 x 2.02

Condition: like new (used), Year of construction: 2022, Engel duo 17060/2000 injection molding machine Year of production -2022 Robot viper 60 - RC300 integrated Kslov Iz Umehccqlelr Z= 4280 mm X= 1800 mm Y= 2600 mm Injection system Screw diameter mm 135 Screw pitch mm 610 Maximum injection capacity cm³ 8731 Screw speed min⁻¹ 125 Screw torque Nm 14000 Maximum screw speed at reduced torque min⁻¹ 135 Reduced torque at max. speed Nm 12963 Reduced screw speed at max. torque min⁻¹ 112 Maximum screw torque at reduced speed Nm 15630 Regeneration efficiency (3-zone screw) g/s 222.9 Regeneration efficiency (barrier screw) g/s 279.2 Injection Injection efficiency cm³/s 1904 Injection volume cm3 8731 Injection weight g 7860 Injection pressure (regeneration) bar 1648 Injection pressure (maximum) bar 2000 Nozzle Nozzle stroke mm 1100 Nozzle pressure force kN 210 Material cylinder L/D ratio - 25 Heating zones (including nozzle) - 8 Heating power kWel 88.5 Closing system Closing force kN 20000 Minimum closing force kN 2000 Opening force (with pressure cushion) kN 1600 Force opening kN 614 Opening stroke mm 3000 Max. distance between platens mm 3800 Min. mould height mm 800 Max. mould height mm 1800 Spacing between tie bars (h x v) mm x mm 2000 x 1600 Size of mould plates (h x v) mm x mm 2700 x 2430 Max. mould weight (moving platen) kg 41330 Max. mould weight (stationary platen) kg 41330 Max. total mould weight kg 62000 Dry cycle stroke (Euromap 6) mm 1400 Dry cycle time (Euromap 6) s 5.5 Ejector Ejector stroke mm 400 Ejector force kN 385 Drive Installed power of main motors kW 265 Capacity oil tank (injection unit) l 1600 Oil filter Max. cooling capacity (at 25°C) kWcool 43.2 Water consumption (at 25°C) m³/h 6.3

Condition: excellent (used), Year of construction: 2007, Wanner C13.20 SV Slow Mill Year of production -2007 Kljlhccqev Inpkjler Power: 2.2 kW Description: Rotor knives: 9 Stator knives: 2 Rotor Ø: 130 mm Rotor width: 200 mm

Condition: ready for operation (used), Year of construction: 2005, Krauss Maffei KM 130 - 380 CX injection molding machine Year: 2005 Controller version: MC5 Technical details Clamping unit Clamping force: 1300 kN Mould opening force, max.: 70 kN Moving platen feed force Opening: 35.4 kN Moving platen feed force Closing: 31.4 kN Mould platen size (h x v): 840 mm x 840 mm Distance between pressure beams (h x v): 530 mm x 530 mm Mould opening stroke: 600 mm Mould height min.: 300 mm Daylight max.: 900 mm Hydraulic ejector - stroke: 150 mm Ejector force forward/backward: 22.6 / 9.9 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 23 Injection pressure: 1860 bar Sweep volume: 201 ccm Injection weight, PS: 183 g Injection rate: 377 ccm/s Screw speed: 390 1/min Maximum plasticization rate: 25 g/s Nozzle pressure: 50 kN Electrical and hydraulic equipment Nominal pump motor capacity: 18.5 kW Installed heating power: 8.12 kW Adjustable barrel heating zones: 5 Kjlev H Au Sehccqljlr Number of drying cycles: 1700 1/h Drying cycle time: 2.1 sec. Tank capacity: 489 ltr. Dimensions and weight Machine dimensions: 4.30 m x 1.6 m x 2.1 m Total machine weight: 5600 kg

Condition: excellent (used), Year of construction: 2006, Arburg 37U 600-290 injection molding machine Year of production - 2006 Closing system: clamping force: 600 kN distance between columns h x v: 370 x 370 mm size of mold plates h x v: 510 x 510 mm min. mould height: 200 mm max. daylight: 600 mm opening stroke: 400 mm ejector stroke: 125 mm ejector force: 30 kN Injection system screw diameter: 35 mm injection volume: 144 ccm injection weight: 132 g injection pressure: 2000 bar screw length: 20 l/d screw torque: 450 N injection speed to the hole: 140 g/s PS number of heating zones: 4 nozzle stroke: 240 mm Kljlov Hm I Ajhccqlsr Dimensions and weight machine dimensions L x W x H: 3.8m x 1.45m x 2.12m total weight: 3500 kg

Condition: excellent (used), Year of construction: 2005, Arburg ALLROUNDER 720 S 3200-2100 injection molding machine Year of manufacture: 2005 Closing unit Closing force: 3600 kN (increased at the factory) Clamping force: 130 kN Opening force: 100 / 800 kN Max. opening stroke: 700 mm Minimum mold height: 300 mm Max. distance between clamping plates: 1000-1400 mm Clearance between columns: 720 x 720 mm Dimensions of mold clamping plates: 1040 x 1040 mm Max. weight of the moving mold half: 3300 kg Ejector force: 100 kN Ejector stroke: 250 mm Hydraulics, drive, other Hydraulic pump drive power: 55 kW Total installed power: 88.9 kW Control cabinet Safety standard: DIN EN 60204 Socket set: 1 x 16 A Injection unit Screw diameter: 70 mm Screw working length (L/D): 20 Cylinder capacity: max. 280 cm³ Injection volume: max. 1078 cm³ Injection weight (PS): max. 984 g Injection pressure: max. 2000 bar Screw speed: max. 51 rpm Screw torque: max. 2247 Nm Nozzle pressure force: max. 90 kN Nozzle stroke: max. 600 mm Installed power of cylinder heaters: 6 x 4500 + 3300 W Installed power of nozzle heaters: 1000 W Machine dimensions and weight Net weight: 17000 kg Electric power supply: Motor + heaters: 125 A Heaters: 50 A Additional options Servo control technology with 2 control pumps Interface for robot system (according to EUROMAP 67, 50-pin) Electric axis control Interface for mold temperature control Interface for V24 printer Interface for PC keyboard ARBURG AES energy saving system Software package "Additional monitoring functions" Software package "Additional machine movements" Software package "Production control" Kolsv Hmvgohccqlslr Machine optimization / user support package Software package "Quality assurance" Documentation package