Used Extruders & extrusion lines for sale (231)

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Cslitudev U Da Sjgsrb Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 2016, Condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Cslsv Uz Awsitudgjrb

Condition: excellent (used), 1040mm wide Welex 3 roll polishing stack with 1040mm x 450mm rolls, pump group, 2 roll haul off. Silicone bath. Crelitudevhch Iogjb

Year of construction: 1988, Condition: excellent (used), Extrudeuse double vis de laboratoire Werner & Pfleiderer ZSK W54 Caractéristiques : Diamètre de vis = 57,8mm Colitujrtbd Usdgsrb

Year of construction: 2016, Condition: ready for operation (used), General Data Measurements width 6900 mm Measurements depth 32400 mm Measurements height 4800 mm Celitudsumpadogerb Control Unit Model PLC This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. Application Types Extrusion

Year of construction: 2017, Condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Cslituevcynusdgsrb

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Colitudov Uqf Iogerb Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing - 2 × side feeders - Segmented screws and barrels

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, - for extruding rigid, flexible, corrugated profiles - KIWEX China product - 4 heating zones - air cooling - 7.5 kw motor - extruder with adjustable speed - water cooling, 1.25 kw pump Crolituev Rgtgodgob - drawing belt with 2 0.5 kw motors - with 2-station winding installation - equipped with linear counter - various technological attachments (creepers for corrugated tubes, various screws)

Year of construction: 1995, Condition: excellent (used), 1800mm Wide Kuhne Coextrusion Sheet Line. 150mm, 70mm, 45mm Extruders, Edi Die, 1800mm X 500mm Diameter Roll Stack, Haul Off Guillotine 1995 * 150mm Kuhne 33D vented primary extruder with electrically heated, fan cooled barrel with PS/ABS screw. Main motor 371kw. Screen changer, gear pump static mixer and 3 layer feedblock with replaceable inserts Crslituov Tww Isdgeb * 70mm Kuhne coextruder 33D vented. Electrically heated fan cooled barrel. Screen changer and gear pump * 45mm Kuhne coextruder with screen changer * 1800mm wide Kuhne model GA5V/1800 calender with 500mm diameter rolls individual servo motors. * Upgraded pressurised 3 zone thermoregulation with heaters, pumps and heat exchangers.

Condition: new, Functionality: fully functional, New and unused machine. - Berstorff Twin screw Extruder ZE 130A -Extruder Screw 2x140 mm L/D 30:1 Building Year: 1988 (unused) Engine: DC Motor - 250 kW Screw-Rotation: 300 Rpm Extruder-Heating: 70 kW Cjlitudod Htygjgsrb With two degassing zones

Year of construction: 2013, operating hours: 100 h, Condition: used, Functionality: unexamined, Platex - Planetary System Extruder Celieukv Shstudgsrb The planetary system consists of one hollow barrel and a main spindle (screw) and several satellite screws (spindles) which work harmoniously with each other enabling the best-known mixing and plastification process. Planetary extruder system compared to other extruder systems provides a much better plastification thanks to the homogeneous and very efficient raw material mixing action. Our Planetary Extruder performs at least 10 times better plastification and homogeneity compared to the Twin-Screw or Single-Screw Extruders.

Year of construction: 2024, Condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Crolitohx Elfjudgsb Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: ready for operation (used), An old extruder with L. Pfeiffer motor is available. Motor power: 9kW, motor speed: 1485rpm, rated current: 15.1A. On-site inspection is possible. Celitudev N Izvegjrb

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, - 10 heating-cooling zones -hydraulic screen changer 2.2 kw - without stopping the machine - 2 screw feeders 65 - magnetic grid separator - vacuum degassing - 90 kw extruder motor with adjustable speed - 2.2 kw material feeding motor - 2.2 kw blower - 2 kw vibrator motor - 4 kw granulator motor Cjlituov N N R Sedgsrb -productivity 100 - 130 kg / hour - automatic feeding

Condition: used, with 175mm Erwepa single screw extruder, gear pump, 2400mm die, 2400mm x 500mm rolls haul off in line knives. Crjlitudjv Twnmogjb * 175mm primary extruder Erwepa Davis Standard 40 D vented with 350kw dc motor and drive. Temperature panel. Hydraulic lantern slide screen changer, Large 90/90 gear pump with gearbox and drive. Gravimetric Maguire 4 zone blender with hopper loaders. * 2400mm wide Reifenhauser 3 roll polishing stack with thermoregulation, haul off. 2400mmx500mm individual drives. Variable speed haul off. In line knives. Large pneumatic roll closing. * Upgraded pump group - 3 zone

Year of construction: 2025, Condition: new, compounder with segmented screws, 25 mm - 32 l/d with atmosperic degassing, melt pressure sensor and die-plate die-face pelletizer made from stainless steel, housing is swivelling lenght of granules is adjustable by means of the cutting speed This compounder is built to order. Crjlitof Uc Uyeudgsb

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. The extruder was used for powder coatings Crjlituovcyk Njdgeb

Condition: new, Functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW Crjlsrg Ebcoitudgsb - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Year of construction: 2013, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Colitjv Ip S Hjudgjrb

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: MP-1406-90, The extruder is a single-screw extruder with an output of max. 120 kg/h. The screw diameter is 90mm. PVC pipes up to 150mm were produced on the system. The system is fully functional. It was replaced by a new one with a larger output. The tools and calibrators are not included. Crslitsufxxrsudgsb

Condition: good (used), Year of construction: 1996, operating hours: 40,794 h, Functionality: fully functional, Complete Battenfeld Cincinnati line, supplemented by a Sica A10-63 bundling unit. Cjlituevbik Aedgorb

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D with barrier screw and mixing section. Celjuxa Aboitudgerb 45mm extruder with 30L/D screw length The extruder is equipped with a new control system function-tested Several extruders of the same type available !

Year of construction: 2011, operating hours: 20 h, Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 2011-340389-0020, Machine was in production of HIPS and PET semi-finished products until 2020. ELIN, water-cooled main motor 160KW. Crolitudsvlk Abogob Converted for repelletizing at extrusion height 1150mm. Control cabinet rebuilt according to the latest technology with Siemens S7-1500 and control components. Control via Siemens HMI TP1900. Degassing screw with max. 4 degassing zones. Strand head with static screen carrier newly constructed. 12x4mm strand holes. Optionally (not included in the offer price) with downstream units such as water basin, granulator, classifying screen and bagging station. Volumetric feeders from Brabender also possible! Sale due to reorientation and replacement investment.

Condition: used, Year of construction: 2010, operating hours: 19,000 h, Functionality: fully functional, type of cooling: air, screw diameter: 70 mm, power: 22.4 kW (30.46 HP), XIDNA COMPOUNDING SYSTEM-CO-KNEADER This Xinda system consists in detail of: - Xinda Kneader with screws - Xinda extruder with screws Crolisr Db Hujtudgeb - Other accessories and spare parts A powder mixture (plastics, additives, magnetic powder) was melted and homogenized on the Xinda system.

Year of construction: 2014, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Cslitev Ip Syoudgorb