Condition: used, Year of construction: 2006, Extraction diameter: 300 mm Nominal flow rate: 6107 m³/h Minimum flow rate: 5089 m³/h Motor power: 7.5 kW Nominal speed: 3000 rpm Negative pressure at minimum flow rate: 2700 Pa Weight: approx. 630 kg Storage location: Nattheim Crebvl Iewhly Sek Ueb

Condition: good (used), Year of construction: 2012, Functionality: fully functional, filter area: 120 m², volume flow: 18,000 m³/h, Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Gear motor 2.2 kW Connection for briquette press with air recirculation Crjbvljwhlkws Ik Usb

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 8106275, The Vacomat 300 XP large dust extractor is the ideal dust extraction system for multi-machine extraction. Air volumes of up to 6,000 m³/h can be conveyed with this clean air extraction system, which also makes it interesting for CNC processing or wide-belt sanding machines. The Vacomat 300 XP is equipped with an automatic control system as standard to ensure that the powerful extraction system is not forgotten or left idle. When a connected machine is switched on, the dust extractor fan starts automatically so that extraction begins immediately. Our Vacomat 300 XP is manufactured according to the modular principle. As standard, the dust and chip mixture is discharged into four dust-tight chip collection garbage cans (4 x 120 l) with inserted, sturdy plastic bags. A vacuum channel holds the plastic bags securely in the collection container. Viewing windows make it easier to check their fill level. Crsbvet Nfalol Ik Uob It can also be discharged via chip containers, ATEX rotary valves and screw conveyors for disposal in a briquetting press, BigBags, a container or chip bunker. The filter bags are cleaned automatically after all connected processing machines have been switched off. Our patented filter shaker cleans the filter bags pneumatically/mechanically. Dust and chips are gently knocked out via the compressed air connection using a type of "shaking". As an option, especially recommended for very high and particularly fine dust content, an efficient pressure surge cleaning system is available (ATTENTION: overall height then +100 mm and length +350 mm). Cleaning via the compressed air tank takes place offline, after extraction operation.

Condition: good (used), The stationary compact dust extractors of the MOBEX-P series are suitable for extracting dry and free-flowing dust. Extractors can be used in almost all industries for single and multi-part workstations, such as circular saws, grinding and milling machines, etc. Up to 4 suction points can be used at the same time. The devices are based on an innovative housing concept, with a patented drive system, optionally equipped with IFA-tested versions. Areas of application: - In case of exhausting one or more workstations - Sawing, cutting - Grinding, polishing - Machining, milling Powder types: - Metal powder - Metal shavings Crjbvl Iopcgxwok Uob - Plastic powder Advantages: - High suction power - Preselection system - Jet-Pulse filter cleaning

Condition: excellent (used), Schuko 4kw sawdust extractor Number of filter bags 24 Diameter of filter bags fi220mm Length of filter bags 115mm Number of collection bags 4 Diameter of collection bags fi500mm Diameter of inlet nozzle 250mm Dimensions of extractor 352x97x284cm Crebvljwf Np Ee Ik Ueb

Condition: used, Year of construction: 2021, Flow rate: 6.920 m³/h Intake socket: 350 mm Filter surface: 71 m² Underpressure: 2.630 Pa Main motor power: 11 kW Frequenzgesteuert: Yes Machine recognition: Yes Automatic blast gate: Yes Star feeder: Yes Extinguishing automatic: Yes Air system: Underpressure Csbvswf Ni Eel Ik Ujrb Automatic cleaning: Jet- cleaning Category of filter material: H3 Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 1.120 kg Space requirement Length: 2,6 m Space requirement Width: 1,1 m Space requirement Height: 3,1 m

Condition: excellent (used), Year of construction: 2014, Traditional bag extraction sprays the finest, most harmful dust around the workshop. The Alko power unit 200 traps the finest dust in a sealed enclosure. Sawdust does not pass through the fan, but is trapped beforehand in the unit's special separator. The filters are cleaned automatically by reverse blows of compressed air, which activates the self-cleaning system to keep the exhaust performance at the same level. Changing sawdust bags is incredibly easy, just lift the cart levers and drive it out. - dimensions 2296 x 830 x 2050 mm -3KW motor -capacity 2261 m / h - filter area 13.8 m2 Csbvl Ikemqkxbj Uorb -capacity 2x250l -weight 470kg -volume 72 decibels

Condition: used, Year of construction: 2022, in a sturdy galvanized sheet steel construction. Work surface with special folding cardboard filter, an additional post-filter and a filter cassette for extraction in the floor area. All filters can be changed quickly and easily. The internal radial fan, in explosion-proof design, is equipped with a blade wheel made of galvanized sheet steel. The explosion-proof drive motor (EEx nA II) is located outside the air flow and drives the fan directly. A 10 m long supply cable and a plug-circuit breaker combination with a built-in on/off switch are included in the scope of delivery. CAUTION! The switch is not explosion-proof and is only approved for use outside of potentially explosive areas. The fan pressure nozzle is located at the top. The air outlet is vertically upwards. Our paint mist extraction wall complies with the latest regulations of the Immission Control Act. The paint mist extraction wall is designed for installation in Zone 2 painting areas, where the average calculated concentration of flammable solvents is limited to < 25% of the lower explosion limit. Technical data: Max. volume flow: 3500 m3/h Exhaust air nozzle: 300 mm diameter. Work surface: 2000 x 1000 mm Space requirement: 2600 x 920 x 1420 mm high Motor: 1.50 kW, EEx nA II T3, IP 55 1500 min-1, B5, 400 V, 50 Hz ATEX marking Ex II 3 G Sound pressure level: 75 dB(A) Weight: 220 kg Fan: right Folding cardboard filter: 1000 x 2000 mm - 1 piece 2072090518 Filter cut-out for Paint-Star - 1 piece 2072091473 Cassette filter for Paintstar - 1 piece Floor tray PBA 20/24 1 piece Length A: 1984 mm, width B: 2378 mm Access ramp for PBA 20/24 1 piece Energy saving flap pn 300mm Each unit includes an air cylinder, 10 m air hose, and a lever valve with a bracket for hanging a spray gun. The energy-saving flap allows approximately 80% of heat energy and approximately 30% of electrical energy to be saved during setup time. Cjbvl Ijvvizdjk Uerb Storage location: Garbsen

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Cyclone height: 6000 mm Cobvlswfrl Aj Ik Uorb

Year of construction: 2018, Condition: excellent (used), Technical datas: - Max. volume flow: 4500 m3 / h - Motor power: 2.2 kW - Speed: 1/1410 rpm - Connection: d = 450 mm Crsbvl Isfl Uagjk Ueb

Condition: used, - Vacuum Exhaust filter, the chips no longer come into contact with the fan wheel of the fan door. The chip garbage cans are permanently connected to the extraction system and internally vented. - Manufacturer: Nestro - Type: NA/T - Volume flow approx. 9,450m³/h - 5 dust garbage cans, rollable, - Number of filters: 180 pcs. - Filter surface: 63m³ - Previously operated with return air - Filter dimensions: 90 x 1200mm - Suction line connections D450mm with non-return flaps - Filter with pressure relief surface - Year of manufacture: 1997 - Filter cleaning by pulse compressed air - Compressed air 6bar Crsbvljwfq E Is Ik Usb Dimensions: - Length: 4,410mm - Width: 1,005mm - Height: 2,750mm- Volt/HZ: 400/50 - Fan power: 11KW - Location: in stock

Condition: good (used), Year of construction: 2022, Functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet Crobjwgz T Sjvl Ik Uob All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Cobevviytsvl Ik Uerb

Condition: excellent (used), Year of construction: 2015, Year of manufacture: 2015 Air capacity: 8866 m3/h Engine power: 15 kW Voltage: 400 V Weight: 295 kg Static pressure: 2912 Pa Speed: 2940 U/min Frequency: 50 Hz Cobvl Isr Dbuqok Ujrb Amperage: 26 A

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Cobvl Iksvvizke Uerb

Year of construction: 2022, Condition: good (used), Air capacity: 3334 m3/h Engine power: 7.5 kW Cjbvl Ijkt S Avsk Uorb Connection inner diameter: 200 mm Static pressure: 4083 Pa Frequency: 50 Hz Weight: 231 kg Fan: 3,300 euros + VAT Cellular dispenser: 2,400 euros + VAT

Condition: used, Year of construction: 1996, Vacuum system with rotary valve. Nominal flow rate: 12,500 m³/h. Filter area: 62.5 m². Weight: 1,350 kg. Maximum vacuum: 4,000 Pa. Maximum air pressure: 8.5 bar. Storage location: Customer. Cobvl Ievviygsk Usrb

Year of construction: 2019, Condition: excellent (used), Year of manufacture: 2019 Air capacity: 8191 m3/h Engine power: 18.5 kW Connection diameter: 350 mm Static pressure: 3983 Pa Speed: 2955 U/min Voltage: 400 V Frequency: 50 Hz Weight: 302 kg Crobvl Ikem H T Tve Ueb

Condition: used, Year of construction: 1996, ALKO clean air filter system with fan, type UF 2. Nominal flow rate 10,000 m³/h. Filter area 50 m². Weight: 845 kg. Nominal pressure 4,000 Pa. Air pressure/connection max. 8.5 bar. Frequency control. Filter system with container and discharge system. (Prepared for connection to a briquette press). Return air duct included. Filter size approx. 3,000 x 1,250 mm. Total area approx. 4,000 x 1,250 mm. Good general condition. Crobvl Iovviymok Uob Storage location: Customer.

Condition: good (used), Electric motor dimensions: Length with pulley 1.0 m It is 0.55 m wide Height 0.55 m with junction box 0.67 m It weighs 510 kg Engine power 75 kW Touch protection IP 55 Crobvjh A Rq Hol Ik Usb Speed ​​1480 rpm

Condition: used, Year of construction: 2002, Nominal flow rate: 3500 m³/h. Motor: 1.5 kW. Baffle area: 2000 x 1000 mm with top and side baffles. Crebvovviz Rel Ik Usb Storage location: Nattheim.

Year of construction: 2011, Condition: excellent (used), Air power: ~ 4000 m3 / h Crsbvl Isd Nah Tsk Uob ~ 2800 Pa Power: 11kW Stub diameter: 250 mm

Condition: used, Year of construction: 2016, POWER UNIT 350+ P-ZRS 1 piece 400 V, NW 355, nominal volume flow 7127 m³/h according to GS-HO-07, max. volume flow 10000 m³/h, compressed air cleaning, pre-separator, integrated automatic extinguishing system, installation with hopper and substructure 960 mm rotary valve for pressure-free discharge into a transport pipe or other disposal facility, power unit for 3 kW transport fan APU 140-350 Option 8ME&8S External 1 piece machine detection for up to 8 processing machines via converter coils or potential-free contact and automatic slide control for up to 8 electro-pneumatic or motor-driven gate valves in 24 V; external junction box for independent wall mounting fill level indicator via ultrasonic sensor 1 x Alko Power Unit 140-300 [sensor and housing] flashing lamp fault indicator 1 x fill level limit indicator (Retonovio) 24 V DC 1 x inclined tube auger for mounting on APU 350 P rotary valve ZRS 960 1 x consisting of: 1 x receiving hopper dimensions 1,500 x 140 x 280 mm primed, painted with plastic lining 1 x metal bend 45° 3.5 m metal combination pipe 4 x metal pipe couplings 5.6 m conveyor spiral 1 x drive unit 45° with 200 mm outlet including maintenance opening, overfill sensor shearing, drive shaft and grounding belt 1 x spur gear motor 400 V / 0.75 KW / 197 rpm. With special shaft and reinforced bearings. TW bimetallic switch "normally closed". 1 x pipe 500 mm long, DN 200 mm, galvanized. 1 x clamping ring for pipe construction, 2 mm, DN 200 mm. Note: Flow rate is 1.5 m³/h. Chipper - specification for friction-free operation: perforated screen less than or equal to 15/20 mm. Additional charge for capacity increase to 10,000 m³/h. Item No. ER-M-161432. 1.00 pc. as described above in the machine description. Storage location: Nattheim Crsbovviyaevl Ik Usb

Year of construction: 1990, Condition: excellent (used), Power: 11 kW Air capacity: ~ 10,000 m3 / h Stub diameter: 400 mm Cebvl Ijd S Afcjk Usrb Year of production: 1990

Year of construction: 1992, Condition: good (used), Air capacity: 30,400 m3 / h Engine power: 33 kW Static pressure: 3100 Pa Speed: 1600 rpm Crobvleh A Rrro Ik Uob