Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left Cshxzofydzbjzwworb • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: Crohovlz Arjxzzwweb 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Year of construction: 2004, Condition: good (used), Type: HMS 10 09.201 Crehxopbvvpszzwwsb Number: 51904 Power: 1,1 kW Capacity V nom.: 720 m³/h Capacity V min: 565 m³/h Pressure: 22,2 mbar at the interface Footprint: mm Suction nozzle top: 100 mm Hose: 2.500 mm

Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, Nominal volume flow Vnenn 750 m³/h, suction nozzle D=100 mm, minimum volume flow Vmin 565 m³/h, negative pressure 14.5 mbar, motor 1.1 kW, nominal speed 2860 rpm, connection 380V 3Ph 50Hz - Cjhev Azfzsxzzwwsrb

Condition: used, Suction system composed as follows: 1) Substation with automatic sleeve cleaning, operating in negative pressure, with the following characteristics: * Width: 1,500 mm * Length: 4.000 mm * Height: 6.000 mm * Air flow: 7,000 m3 / h * Room temperature * No. of hoses: 540 * Hose diameter: 125mm * Hose height: 2800 mm 2) High efficiency centrifugal fan with reverse blade impeller 3) Series of ducts in galvanized sheet 4) Chip transfer system from the substation 5) Electrical panel 8) N ° 1 non-return valve Crshxzov Axyiezwwob

Condition: new, Year of construction: 2025, The neodymium adapter for positioning the spindle of threading arms is a modern tool that allows you to precisely position the threading machine at a perfect right angle to the workpiece. With this adapter and the use of the 90° positioning test, the user can easily and effectively achieve accurate positioning. Product characteristics: The neodymium adapter for positioning the spindle of threading arms is an innovative tool that allows precise positioning of the threading machine at a right angle to the workpiece. Thanks to the use of a 90° positioning gauge, this adapter ensures reliable and accurate positioning. Cehxzzwjv Axu Tewsrb The positioning procedure with this adapter is simple and effective. Here are the steps you should take: Attach the spindle adapter: With the power off, attach the adapter to the tapping head spindle. Make sure the adapter is properly positioned and firmly attached. Loosen the joints: Make sure all joints on the adapter are loose. If the head can be rotated 360 degrees, loosen the joints on this part as well. This will ensure that the adapter moves freely and can be precisely positioned at the right angle. Attach a magnet to the workpiece: Attach a magnet to the workpiece. The magnet should be properly attached and stable to ensure reliable and precise positioning. Thanks to this adapter, the user can now easily position the threading machine at a right angle to the workpiece. This innovative technology provides effective and accurate results, allowing for precise threading. The positioner fits electric threading machines available on our website: RGM16PW, and RGM16W. Manufacturer: Cormak

Condition: new, Year of construction: 2025, Extraction nozzle 355 mm Nominal motor rating 15.0 kW / 3 Ph Voltage 400 V / 50 Hz Max. flow rate ca. 10,000 m3/h Nominal flow rate* 7,127 m3/h Vacuum at nominal flow rate 3,000 Pa Crjhxzzwsfzbqyswsb Filter area 73 m2 Pre-separator Integrated Extinguishing device Integrated Swarf collection capacity (net / gross) 3 x 165 L / 3 x 250 L Sound pressure level 73 dB(A) Dimensions (L / W / H) in mm 3,130 x 1,058 x 2,351 Weight net 1,040 kg

Condition: good (used), Year of construction: 1998, Radial fan, chip extraction fan, fan, extraction, chip blower -Engine power: 15 kW -Speed: 2920 rpm -Volume flow: m³/h -Total pressing: Crohxzsvviayozwwsb -Fan wheel: Ø 640 x 255 mm -Connection input: Ø 445 mm -Connection output: 330 x 330 mm -Dimensions: 1210/1020/H1090 mm -Weight: 445 kg

Condition: excellent (used), Functionality: fully functional, - 1 filter bag, 1 filling bag - Motor 1.5 kW Cehxzzwjvvhvmowjrb - Connection diameter 140 mm

Condition: reconditioned (used), Rated motor power 2.2kW/5.2A Rated voltage 380V / 50Hz / ~3Ph Rated volume flow 1350 m³/h Rated negative pressure 2850 PA Main switch + start and stop Manual filter cleaning Crehxev Azcyszzwwsb Suction nozzle 140 mm 1 container diameter 800 mm

Year of construction: 2021, Condition: good (used), For technical data, see nameplate. available: from May/2023 Cjhxzzsi Ac Nhswwerb serial number: 200419 Riedex DM-200/M-B Dust extractor left hand version, motorized cleaning, with chip garbage cans

Condition: good (used), Radial fan, chip extractor, fan, suction, chip fan -Motor power: 37 kW Cshob Ikr Hjxzzwwsrb -Speed: 1470 rpm -Connection input: Ø 600 mm -Connection output: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg

Condition: used, Power connection 480V 4kW Filter area 15.8 m² Vnom 3200 m³/h Vmin 2262 m³/h Extraction connection D=200 mm Crehsvz U Srexzzwwob Weight approx. 550 kg LxWxH: 2400 x 900 x 2100 mm

Year of construction: 2021, Condition: new, Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. Riedex DM-350RV/P dust collector Technical data DM-350/P Engine power: 11,0 kW Nominal volume flow 20 m/s: 6927 m³/h max. air volume flow: 8000 m³/h Filter cleaning: JET cleaning Residual dust content: ᐸ0,1 mg/m³ Suction socket with shelf: 350 mm (right) with rotary valve, opening dimensions: 990x220 mm, motor: 0.37 kW Exhaust air duct 90° with bird protection grille Optional: Crehxzefn Ndgozwwsb - Steel base frame 3400x2700x2000 mm (LxWxH)

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, chip blower -Engine power: 22 kW -Speed: 1460 rpm -Volume flow: 22,100 m³/h -Total pressing: -Connection input: Ø 560 mm Cjhovvh Uvsxzzwwerb -Connection output: 450 x 560 mm -Dimensions: 1270/1500/H1600 mm -Weight: 507 kg

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile 2x chip bins á 190l Volume flow 2500 m³/h HxWxD: 2160 x 830 x 1900 mm Crohxzzwovz Uhyswjb

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Crehxzzwefr T Emoweb Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Cshefr T Eqoxzzwwjrb Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, Condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very Crshsftb Eboxzzwweb well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Cjhxzofv Hiqjzwwerb Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, Condition: refurbished (used), Painting cube on rollers Ready to plug in 230 V Motor power: 1,1 kW volume flow: 2.500 m³/h Dimensions: 1200 x 1200 mm W X H Hose connection rear bottom side: 250 mm Crshxzofuhu Aszwweb Double filtration system paper filter and Paintstop filter mat Spray booth Paint mist Dry spray wall Spray wall Paint wall

Year of construction: 2017, Condition: ready for operation (used), Technical data will follow! Crehxogny Ryozzwwjb

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. Cehxzefn Ndcjzwwsrb We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm Cjhxzzjfn Nddswwsrb depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2013, Condition: ready for operation (used), See photos! Crshegny Agjxzzwwsb