Dry spray wall Spray wall Paint wall

D&M TSWc 2x2 7.200 m³/h

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Ndsdpfx Ajfg E H Tefrjd Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 Nedpfxsvcrmpo Afrsdd bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1999, machine/vehicle number: 99T318, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - 4.5 kw - Blade diam. 330 mm Nsdpsqmpnaefx Afrsdd - V. 380/50 - S/N 99T318 - Year 1999

Condition: used, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) Ndodpfx Aevu Hfdsfrsd 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!)

Condition: new, table diameter 315 mm 50 Kg 25 Kg Nedpji Hg I Defx Afrjdd chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Ndsdpfx Afegk Nlpsrod Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements Ndjdpjfg E Hpefx Afrod all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Nodpfog S Ui Aex Afrodd

Condition: new, table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 630 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Nodpfjfk Ailox Afrjdd For more information, follow the link:

Condition: new, Article: Welding rotary table 50 kg TYPE: KT-50 without jaw chuck Max. Load: 50Kg horizontal Max. Load: 25Kg vertical Rotation speed: 1-7,5 rpm Rotation direction: left and right Face plate speed: manually adjustable Face plate diameter: 315mm height of faceplate: 375mm inclination angle of face plate: 0-90 Motor power in operation: 0,08kw Motor power standby (Kw): NA dimensions: 430 x 430 x 375mm Ndodpfx Afebambrorjd Weight: approx. 38kg Power: AC 110V / 220V 50/60Hz Price is without chuck and height adjustable workbench Surcharge quick chuck 195.-€ Packing and shipping Germany approx. 80.-€