Condition: used, Year of construction: 2015, 3kW compressor Air dryer 1kW Tank 200L Hour meter: 1070H Cedpfszr R Dzex Amaorf 380V

Condition: used, Year of construction: 2015, Volume flow / delivery rate (depending on pressure variant): at 8 bar: approx. 0.34 1.24 m/min (or up to 1.01 1.2 m/min) at 10/11 bar: approx. 0.34 1.04 m/min at 13/15 bar: approx. 0.30 0.78 m/min Cjdpfx Aozrtr Uemasrf Maximum overpressure: selectable, 8, 11, or 15 bar Equipment & dimensions: Compressed air tank: 270 liters (underslung) Refrigerant dryer: Integrated (environmentally friendly refrigerant) Sound pressure level: approx. 63-66 dB(A) (quiet operation) Dimensions (W x D x H): approx. 630 x 762 x 1100 mm Weight: approx. 220-240 kg (varies slightly depending on the model) Electrical connection: 400 V / 3 phases / 50 Hz

Condition: like new (used), Year of construction: 2021, operating hours: 841 h, functionality: fully functional, Screw compressor, Kaeser Aircenter SK22 11 kW 8 bar 2 m3/min Crjdpfx Amezrtlbeajf Year of manufacture: 2021 Operating hours: 841

Condition: good (used), Year of construction: 1995, Gebr. Kaeser screw compressor SK 19 Motor power: 11 kW Year of manufacture: 1995 Permissible operating overpressure: 10 bar Air delivery rate: 1900 liters/min with Kaeser control relay Dimensions approx. L 785 x W 820 x H 1017 mm (dimensions without connections). Weight: 270 kg Location: available from warehouse 54634 Bitburg Csdozrhrvjpfx Amajrf - immediately available -

Condition: excellent (used), Year of construction: 2020, Kaeser screw compressor SK 22 - 11 bar - Top condition - Volume flow at 11.0 bar (gauge) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (gauge) 13.7 kW Max. overpressure 11.00 bar Efficiency of drive motor at full load 91.2 % Efficiency class of drive motor IE3 Rated power of drive motor 11.0 kW Speed of drive motor 2960 1/min Crjdpfszrhh Djx Amaef Type of protection of drive motor IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable volume of warm air 2500 m³/h Compressed air connection G 1 Coolant volume 7.0 l Coolant type Compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: available from warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Viber-Air Power: 7.5 kW / 7.5 HP Motor speed: 3000 rpm Tank capacity: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Cedpfx Amexdbvrjaorf Air flow: 800 l/min. Drive type: direct drive Outlet diameter: G 3/4 Dehumidifier: TR-10HP Cooling: Air Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length/width/height): 1900/800/1660 mm Weight: 390 kg Suction capacity: 950 l/min Discharge capacity: 800 l/min

Condition: new, Year of construction: 2026, Viber-Air INV11-500 Screw Compressor with Dryer and Inverter Power: 11 kW / 7.5 HP Motor Speed: 3000 rpm Cjdexdbubjpfx Amaerf Tank: 500 liters Voltage and frequency: 400V / 50Hz Water resistance: IP23 Noise level: 65 dB Operating pressure: 10 bar Air flow: 1500 l/min Drive type: direct drive Outlet diameter: G 1 Dehumidifier: TR-20HP Cooling: oil Screw manufacturer: BAOSI Inverter: Included Display: HTK070 Dimensions (length / width / height): 1900 / 750 / 1030 mm Weight: 500 kg Suction capacity: 1800 l/min Discharge capacity: 1500 l/min

Condition: new, Year of construction: 2026, Power 5.5 kW / 6.6 kW Inverter yes Motor speed 4500 rpm Voltage and frequency: 400V / 50Hz Tank: 200 liters Water resistance: IP23 Noise level: 75 dB Working pressure: 10 bar Air flow: 640 l/min Suction capacity: 750 l/min Discharge capacity: 640 l/min Drive type: Direct drive Outlet diameter: G 3/4″ Dryer: None Air-to-oil cooler Crodpjzr Nauofx Amaef Screw manufacturer: BAOSI Inverter: GD300-01A Display: HTK070 / MAM6070 Dimensions (length/width/height): 1446 × 506 × 1096 mm Packaged dimensions (length/width/height): 1385 × 520 × 1200 mm Weight 180 kg / 200 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 3 Aerzen VM 30 screw compressors Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volume flow: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Codpfx Aorkpp Hsmaorf Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular maintenance was carried out by a qualified service company!! Not operated since 2019. Have been stored in a dry and heated location since then.

Year of construction: 2026, condition: new, CORMAK Refrigerated Compressed Air Dryer is a professional industrial device designed for effective removal of moisture, water vapour, and oil particles from compressed air systems. Using efficient refrigeration technology, the refrigerated air dryer ensures stable operation of compressed air-powered equipment, extending their service life and improving reliability. It is an ideal solution for companies looking for modern compressed air treatment methods in pneumatic installations. Main advantages of the CORMAK compressed air dryer Advanced refrigeration system — the two-stage air cooling process down to the dew point ensures effective separation of moisture and oil particles. Stable operation in systems up to 10 bar — the device is designed for use in standard industrial compressed air installations. High efficiency — capacity of up to 7000 l/min makes the dryer an effective solution for medium and large compressed air systems. Energy-saving design — the use of a variable-speed fan reduces power consumption to only 1.37 kW. Automatic condensate drain valve — ensures reliable condensate removal without the need for operator supervision. Compact dimensions and easy installation — ideal for upgrading existing pneumatic systems. Design and technology The refrigerated compressed air dryer has been designed for maximum efficiency and long-term durability. Its main structural components include: 1. Air-to-air heat exchanger During the first stage of the process, incoming compressed air passes through a heat exchanger, where it is pre-cooled by colder air leaving the evaporator. The counterflow design improves heat recovery and increases the overall energy efficiency of the system. 2. Refrigeration system evaporator During the second stage, compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This causes the water vapour and oil particles contained in the air to condense. 3. Condensate separator After cooling, the mixture of air and condensate enters a high-efficiency separator, where condensed water and oil are separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity according to actual operating requirements. This reduces energy consumption and extends the service life of system components. Equipment included Automatic condensate drain valve Integrated water and oil separator Variable-speed fan with automatic adjustment to operating conditions Electronic control system ensuring stable operating parameters Compact and durable housing resistant to industrial environments Technical specifications Parameter Value Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Capacity 7000 l/min Power consumption 1.37 kW Supply voltage 230 V Csdpfx Amomt Dcxsaorf Dimensions (L × W × H) 1000 × 550 × 920 mm Weight 95 kg Refrigerant type and quantity R410a, 900 g

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZR90 90 kW Csdpfjzqvvasx Amajrf 7.50 bar 14 m3/min Year of manufacture: 2012 Operating hours: 5735

Condition: good (used), Year of construction: 2017, FOR SALE: Complete Industrial Compressed Air System / Unit – KAESER For sale, a complete, high-performance compressed air system from the KAESER brand, ideal for workshops, factories, or demanding industrial applications. High-quality German equipment, reliable, and well-maintained. DETAILS OF THE EQUIPMENT (3 MAIN UNITS): 1. Screw compressor with variable speed drive – KAESER CSDX 165 SFC Brand / Model: Kaeser CSDX 165 SFC (Sigma Profile) Year of manufacture: 2017 Rated power: 90.0 kW Maximum operating pressure: 8.5 bar Motor speed: 2980 rpm Series / Article number: 3111 / CSDX.4 Specific feature: Equipped with a variable speed drive (SFC) for optimized energy consumption management based on air demand. 2. Refrigerant air dryer – KAESER TF 280 Brand / Model: Kaeser TF 280 Year of manufacture: 06 / 2017 Maximum operating pressure: 16.0 bar Electrical supply: 400V / 3 Ph / 50Hz (Rated current: 9.6 A) Refrigerant: R-134a (2.60 kg) Serial number: 1631 / Material: 1.2482.0 3. Fixed-speed screw compressor – KAESER CSD 102 T Brand / Model: Kaeser CSD 102 T Integrated equipment: Integrated air dryer module (T version) and SIGMA CONTROL electronic control. Usage: Ideal as a main compressor or as a backup to ensure a secure air supply. Codpfx Aozqtdzsmaerf ADDITIONAL INFORMATION Overall condition: Good visual and functional condition, always maintained in a production setting. Availability: Immediate. Terms: Collection on-site, the responsibility of the buyer (suitable handling equipment should be provided).

Condition: excellent (used), Year of construction: 2014, operating hours: 26,000 h, functionality: fully functional, overall weight: 1,603 kg, power: 55 kW (74.78 HP), 2014 Ingersoll Rand R55i Compressor 55kw screw compressor Credpfjzrxhhsx Amaof Full service history Approx 26k hours Very good condition

Condition: excellent (used), Year of construction: 2018, operating hours: 43,309 h, functionality: fully functional, Screw compressor Atlas Copco GA75VSD+FF Inverter and dryer integrated 75 kW 12.75 bar 15.50 m3/min Year of manufacture: 2018 Operating hours: 43,309 Csdpfx Amezp Urwjajrf

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar Crjdpezrn Ahsfx Amajf - WILO industrial circulation pump Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Condition: good (used), functionality: fully functional, Sharpening machine for rotary cutting tools. 4 positions. Codozrnmaepfx Amajrf

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Crsdpfxszrnc Ij Amaef Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: used, Year of construction: 2021, functionality: unexamined, For sale is a high-quality, oil-free RENNER scroll compressor, model SLDK-S 5.5, with an integrated refrigerant dryer and pressure vessel. Technical data: Year of manufacture: 2021 5.5 kW 627 l/min flow rate 8 bar operating pressure 400 V / 50 Hz / 3 phases Oil-free compressed air generation SCROLLline SuperSilent Integrated refrigerant dryer Pressure vessel Crodozrl Dvjpfx Amajf The compressor comes from a company acquisition. The unit has not been used since August 2022. Therefore, we cannot make any statement about its current functionality and are selling the unit expressly as untested. Visually, the unit is in very good condition. The original operating manual is available. Inspection is possible by appointment. Sale from company stock. The sale is made with the exclusion of any warranty for defects in materials, to the extent permitted by law. If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider Screw Compressor 4152009631 - Durable, V-belt driven compressor units Crsdpfx Ameziukysasf - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control The machine was purchased as a spare unit in 2020 and is new and has not been used. The machine was never used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,500 h, functionality: fully functional, overall weight: 898 kg, power: 75 kW (101.97 HP), volume flow: 476 m³/h, pressure (max.): 13 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Well-maintained, fully functional screw compressor, 75 kW, with frequency control. Cjdpezrihrofx Amaerf

Condition: used, Year of construction: 2017, power: 55 kW (74.78 HP), pressure (max.): 8.5 bar, ambient temperature (min.): -10 °C, ambient temperature (max.): 45 °C, We offer this used Kaeser CSD 105 screw compressor, manufactured in 2017. Compressor type: CSD 105 Material number: CSD.4C Serial number: 1328 Credpjzrgmxsfx Amaof Year of manufacture: 2017 Rated power: 55.0 kW Motor speed: 2975 rpm Maximum working pressure: 8.5 bar Ambient temperature range: -10°C to 45°C Option: K1 C3 11,000 operating hours If you have any further questions or require more information, please send us a message or call us. We also have used BS51 and BS61 compressors, a TD61 dryer, and a 2000L pressure vessel in stock. Prices are negotiable. You can also purchase a complete set of machines at a favorable price. The machines are used and do not come with a warranty.

Condition: as good as new (ex-display), Year of construction: 2025, direct-drive Screw compressor ALMIG GEAR XP 22 - 10 bar (air cooled) Crodpfx Ajd Dpvfemajf Year 2025 Time of delivery: 3 weeks Technical specifications Type: GEAR XP 22 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 3.20 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 22 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 73 dB (A) Length: 1250 mm Width: 880 mm Height: 1515 mm Weight: 670 kg Compressed air connection: G 3/4 "

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, machine/vehicle number: MA0138_MAXXI4,0D_270st, Demonstration machine: Crjdjd Hy T Aopfx Amaef new piston compressor available immediately (Plug and Play): AIRKO MAXXI 4.0 D - 270 ST - 10 bar with standing 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 4.0 kW Delivery quantity at 7 bar: 495 l / min Sound level: 78 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 155 x 59 x 113 cm Weight: 134 kg Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. Crsdpfod H Dr Sjx Amaef The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

Condition: good (used), Year of construction: 2008, operating hours: 45,000 h, Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 1.41 / 7.79 m³ / min at 6 bar min / max: 1.40 / 7.74 ​​m³ / min at 7 bar min / max: 1.39 / 7.69 m³ / min at 8 bar min / max: 1.38 / 7.64 m³ / min at 9 bar min / max: 1.37 / 7.59 m³ / min at 10 bar min / max: 1.35 / 7.29 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Cooling water requirement at 100% load (with inlet + 15 ° / delta t = 15 K): 55 l / min Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Cedpfxogkbfhe Amaorf Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Height: 1,560 mm Weight: 1,590 kg Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.