Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, For sale is a Karl Barth AG "Ventomat" high-performance radial fan, type SE-1-100-4p, single-sided suction, sheet metal housing, painted, motor 5.5kW, 4-pole. Karl Barth AG (Dättlikon ZH) has been manufacturing these fans for over 50 years, and they are a well-known and highly regarded brand in Swiss agriculture, specifically for hay and biomass drying. The fan was used by us for approximately 4 months for ventilation/drying (hay and a drying container) and is in perfect working order. It was newly purchased in December 2025. Included in the scope of supply: - 1x Ventomat SE-1-100-4p fan, 4kW rated power, motor 5.5kW/4-pole, sheet metal painted, single-sided suction - 1x Invertek Optidrive E3 frequency inverter, 5.5kW, IP66/NEMA4X, factory configured, including maintenance switch and mounting base plate - 1x duct cone 222/563 to D400mm - 1x duct reducer D750/D600mm including flange ring D750mm - Additionally included free of charge: 1x flexible fabric hose Ø400mm, 10m length Technical data: Parameter Value Manufacturer Karl Barth AG, Dättlikon (Switzerland) Type Ventomat SE-1-100-4p Rated power 4 kW Motor 5.5 kW, 4-pole Design sheet metal painted, single-sided suction Frequency inverter Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X FU input 380-480V, 3-phase, 50/60Hz, 17.2A Fpedezrzizjpfx Akvok FU output 0-480V, 3-phase, 14.0A, 7.5HP Duct connection 222/563mm to D400mm (cone), additionally D750/D600mm reducer Condition: Barely used (approximately 4 months in operation), technically flawless, fully functional. The new price (December 2025) was CHF 7870.00. Location: 6064 Kerns (self-collection).

Condition: good (used), functionality: fully functional, Year of construction: 2001, working width: 1,650 mm, overall weight: 8,000 kg, rear tire size: 15/55-17, 48 cubic meters, 6 rakes, hydraulic drawbar, 7 blades. Fedpfjzrzd Sox Akvepk

Condition: used, 1 unit of KIOTI CS 2520 diesel lawn tractor Engine: liquid-cooled, 3-cylinder KIOTI diesel engine, drive & traction: switchable all-wheel drive (4WD) including mechanical rear differential lock, fuel tank capacity: 25.5 liters of diesel, serial number: 047300068 Fodpfx Aszqanyokvopk Color: as shown in the pictures, see images and inspection Condition: new

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: TB321300601, Loading height: 1.80 m. Electrical controls. Fpedpeyfum Ijfx Akvsk

Condition: excellent (used), Year of construction: 2025, operating hours: 2 h, power: 51 kW (69.34 HP), motor manufacturer: Hyundai, front tire size: 300/70 R20, rear tire size: 420/85 R24, Equipment: air conditioning, Technical information Number of cylinders: 4 Front tyre size: 300/70 R20 Rear tyre size: 420/85 R24 Drive: Wheel Empty weight: 2.770 kg Condition Technical condition: very good Fodpfx Aozrry Djkvepk Visual appearance: very good Other information Pto: 540/1000 Transport dimensions (LxWxH): Länge: 4.070 mm, Breite: 1.820, Höhe: 2.530 mm Additional information Please contact Tobias Mayr for more information = Additional options and accessories = - Front loader - Single wheels

Condition: used, Year of construction: 2015, operating hours: 6,800 h, power: 99 kW (134.60 HP), Equipment: air conditioning, all wheel drive, cabin, Well-maintained Fendt 313 Vario / SCR / TMS Good condition, see photos 6,800 hours First owner 19% VAT can be shown Net: €46,000 If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. Please, no emails / Due to time constraints, emails can only be processed sporadically, thank you for your understanding! * Vario operation * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with button operation * Variotronic headland management system * Vario TMS tractor management system * Cabin * Air conditioning * Continuous front windshield * Height and tilt adjustable steering column * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Passenger seat with automatic seatbelt * Particulate filter (aerosol) * Segmented windshield wipers front * Interior mirror * Work lights * Engine & Transmission * Reversing function, stop-and-go function * All-wheel drive / differential locks * Comfort control for all-wheel drive / differential lock * Rear / front differential with 100% lamellar lock and steering angle sensor * Load-sensing PTO shafts * Rear: Flange PTO shaft 540/540E/1,000 rpm * External control for rear PTO shaft * Hydraulic system * Electro-hydraulic rear lift (EHR) * 1st and 2nd hydraulic valves in the rear * Hydraulic valve controls cross control lever, UDK couplings rear * Front axle weight 60 kg * DL hydraulic system / 2-line system * Trailer hitch, height adjustable * Roof white * Body paint in RAL color * Rim paint on request * Heated rear window * Ventilation * Air conditioning * Super comfort seat, air-suspended * Cabin floor mat * Steering wheel incl. rotary handle * Accessory bracket * Terminal bracket * Mirror bracket * Rearview mirror * Cabin suspension mechanical * Work lights roof front TWINPOWER * Work lights fender * Work lights roof rear TWINPOWER * VARIO TMS C267 * Rotating beacon * Body color RAL 1032 * Rim color RAL 9006 white aluminum * 40 km/h version * PTO speed 540/540E/1,000 rpm * Double-acting hydraulic valve front, 1/1 center right + rear * Additional valve 1/2 rear * Additional valve 1/3 rear * Return flow center right * Upper link CAT 2 (not available) * Fuel pre-filter, heated * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~ 90% * 1820 mm front track * 1800 mm rear track If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later as we are often in a customer meeting. More offers can be found at: Fedpevn D E Uofx Akvopk Equipment details were determined using a VIN query; technical errors may occur. Information provided online is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale subject to change.

Condition: used, Year of construction: 1995, operating hours: 9,066 h, power: 70 kW (95.17 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, parking heater, * Enclosed cab * Manual transmission with 6 forward gears * Air conditioning * Radio * Switchable all-wheel drive * 2 hydraulic circuits at the rear (infinitely adjustable) * Rear PTO shaft * Rear three-point linkage * Rear drawbar (height adjustable) * Front weight * Preparation for front three-point linkage * Front hydraulics (2x 1-circuit & 1x 2-circuit) ----* Front tire dimension: 420/70R24 * Rear tire dimension: 480/70R38 * Fuel tank: 100 liters * Technically permissible total weight: 7500 kg * Unladen weight: 4400 kg Fedpezrrhzsfx Akvjpk * Overall length: 4030 mm ----Vehicle number: 12365----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, brokerage of financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: used, Year of construction: 2015, Tyre drag harrow    • Working width: 6000 mm    • Hydraulically foldable Fpsdpezrlmkjfx Akvsk Condition: Used Year of manufacture: 2015

Condition: used, Year of construction: 2017, operating hours: 999 h, power: 285 kW (387.49 HP), Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, Operating hours cannot be read. Vehicle is not ready for operation!! Fedpfjzrkpqsx Akvopk * John Deere control system with telematics system * Automatic climate control * Hands-free system * Rear-view camera system with external monitor * 2 seats Vehicle number: 12301 Errors and prior sale excepted.

Condition: used, Year of construction: 1978, first registration: 06/1978, color: green, Equipment: trailer coupling, = Additional options and accessories = - Power steering Fpjdpfxexdvqqe Akvek = Further information = Odometer reading: 15,715 km Drive: All-wheel drive Unladen weight: 3,950 kg Gross vehicle weight: 3,950 kg Manufacturer: Mercedes Benz, Mercedes Benzstrasse 100, 70372 Stuttgart, DE

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * Fedey Ubgujpfx Akvjpk * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, working width: 2,750 mm, color: red, overall weight: 398 kg, total height: 1,000 mm, total width: 3,000 mm, machine/vehicle number: EFA00914, Hooikneuzer - stroschudder in quasi nieuwstaat - weinig gebruikt tot juli 2026 en verkoop wegens aankoop combi maaier/kneuzer. Altijd droog weggeborgen en netjes gereinigd en gesmeerd. Regelbaar wiel voor diepte van de veertanden. Regelbare kneuzing in 4 standen. Zeer zeldzaam te vinden in tweedehandse staat, zeker niet in deze zeer goede staat. Alles top, banden, veertanden, bewegende delen, draagraam, ... Fpodpfjzq S Dtox Akvsk

Condition: used, Year of construction: 2016, operating hours: 3,410 h, power: 190 kW (258.33 HP), next inspection (TÜV): 08/2028, Equipment: air conditioning, all wheel drive, Internal vehicle number: FG50320 Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Never registered. Financing example: * Internal number: Tractor * Purchase price: 72,000.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 1,100.02 € Residual value: 14,380.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. Fpedoytlldopfx Akvok We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Year of construction: 2021, next inspection (TÜV): 08/2028, Internal vehicle number: FG11502 Available immediately at our location in Kaufungen. Fedpeytlk Tjfx Akvjpk For more information, please contact: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) NEW! - never used. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2010, operating hours: 504 h, power: 10 kW (13.60 HP), Operating hours: 504 Kubota B 1620 mini tractor Year of manufacture: 2010 First registration: 2020 Operating hours: 504 Engine: 719 cc, 10 kW Transmission: 6 forward / 2 reverse gears, 19 km/h PTO 540/1000, rear linkage, 2 double-acting valves possible Cabin with rotating beacon Front loader with bucket Sale according to § 25a UStG, taxed on the difference, Storage location: null Fjdpfx Akjzfu Abovopk

Condition: new, Hydraulic winch HAW3000 with electric valve and remote control for wheel loaders, excavators, cranes, mini-excavators, tractors for use in viticulture, horticulture, civil engineering, construction, and many other applications. The hydraulic attachment winch HAW3000 simplifies many tasks. Maximum rope capacity at 3000 kg pulling force: 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 70 m with 6 mm wire rope. Fsdpfx Aofn Tu Tokvepk Maximum rope capacity at 3000 kg pulling force: 70 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 100 m with 5 mm synthetic rope. Maximum rope capacity at 1000 kg pulling force: 220 m with 4 mm synthetic rope. Standard equipment: 30 m of 8 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on forestry cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M12 threaded holes. This offers many possibilities for attaching the winch. (The threads are cut and painted. They must be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the wire rope. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow up to 125 l/min, briefly max. 150 l/min ⦁ Maximum pulling force: 3000 kg ⦁ Rope speed: 100 m/min at an oil flow of 125 l/min ⦁ Weight: 95 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you.

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers Fsdodf Ufdjpfx Akvspk - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Fpsdpfsfn Tvhsx Akvek Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Fedpfx Aksdf Ud Sovopk Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Hydraulic winch HAW4000, without valve, for wheel loaders, excavators, cranes, mini-excavators, tractors, and agricultural machinery in viticulture, horticulture, civil engineering, and many other applications. Fedpfxsfn Tvio Akvepk The hydraulic attachment winch HAW4000 can simplify many tasks. Maximum rope capacity with 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity with 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity with 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity with 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on skidders and excavators ⦁ As a winch for tractors, construction machines, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They must be re-cut before use to ensure rust protection.) Large, greaseable cable pulley for a long service life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and pulling forces, we can offer you different options. Please contact us, and we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter Fododf Ufpspfx Akvepk - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Article number: HAW1700-EV-Funk

Condition: new, Hydraulic winch HAW4000 with electric valve for wheel loaders, excavators, cranes, mini-excavators, tractors in viticulture, horticulture, civil engineering, and many other applications. The hydraulic attachment winch HAW4000 can simplify many applications. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard equipment: 50 m of 10 mm wire rope. ⦁ In viticulture, agriculture, forestry, and horticulture ⦁ In civil engineering, construction, and road construction ⦁ For pulling out tree stumps and trees ⦁ As an attachment winch on logging cranes and excavators ⦁ As a winch for tractors, construction machinery, and grape harvesters A robust steel construction with 3-sided mounting options (left, right, rear) with M16 threaded holes. This provides many possibilities for attaching the winch. (Threads are cut and painted. They need to be re-cut before use for rust protection.) Large, greaseable rope pulley for a long service life of the steel rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min, briefly max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at an oil flow rate of 200 l/min ⦁ Weight: 170 kg ⦁ Color: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us; we will be happy to advise you. Dimensions: Fjdpfxsfn Tvko Akvepk ⦁ Length: 850 mm ⦁ Length with rope inlet: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Overall width: 650 mm ⦁ Height: 420 mm

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! Fedpoupiapefx Akvopk THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Fpedpfx Asuph Uxekvsk Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Year of construction: 2020, condition: new, Professional earth auger, Ø 400 x 1000 mm, with Hardox cutting edge. Robust earth auger for our carrier unit, or upon request, also for other mounting systems. Fpodpfx Asdf R Rqjkvsk Item No.: MT18-EB-400-1000