Welding machine

* FRONIUS Magic Wave 5000

Condition: used, Year of construction: 2018, operating hours: 3,550 h, functionality: fully functional, Used machine Year of manufacture: 2018 Technical Specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0–100 mm Speeds 1st unit, frequency-controlled: 5–15 m/sec 2nd unit, frequency-controlled: 6–17 m/sec Feed speed, frequency-controlled: 0.2–8 m/min Electrical Main motor 1st unit – W: 7.5 kW Pedpfx Ahox I Ed Ro Hjgg Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit – W: 7.5 kW Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Dust extraction per unit Required capacity with 100 mm connection: 6,100 m³/h Machine weight: 3,750 kg Accessories / Special features Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction unit Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Incl. H14 filter - Incl. EX version for aluminum - Incl. sludge container

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Pedoxddamspfx Ah Hsgg

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Pedjd Hy Elspfx Ah Hsgg Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ Pgedpfxswbh Ifs Ah Hog ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: used, Year of construction: 2006, Hyundai Kia SKT 210SY lathe with Y-axis, C-axis, driven tools Fanuc 18iTB control with Manual Guide Max turning length 530mm Pjdpswyv T Hjfx Ah Hsgg Travel: X-axis 220mm Y-axis 80mm (+-40) Sauter 12-position tool turret for VDI40 Spindle bore 65mm, sub-spindle bore 33mm Tool probe Parts catcher Very good condition - Chip conveyor - Documentation - Tool holders

Condition: new, Year of construction: 2024, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device Psdpfxsfu Itbs Ah Hogg motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Podpfxou Rptyo Ah Hegg Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: new, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - The two lower rollers are moved hydraulically - Three rollers are driven - Two digital displays - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop Pgodpfx Asucqqush Hjg - Documentation - 400 V

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, Various very heavy-duty welding tables, machined, partially plasma nitrided Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 Psdjwu Exzopfx Ah Hegg - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300; plasma nitrided €3,300 - 2.4 x 1.2 meters, €2,900; plasma nitrided €3,900

Condition: used, Year of construction: 1977, roll diameter 320 mm throat 310 mm workpiece height 230 mm table-size 505 x 505 mm Pgjdjvnv S Topfx Ah Hog cutting speed 12 - 375 m/min turning speeds U/min saw band length 2 mm voltage 400 V total power requirement 1,3 kW weight of the machine ca. 420 kg dimensions of the machine ca. 0,80 x 0,80 x 1,65 m - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp