Surface grinding machine

ZIERSCH FS 2040H

Condition: like new (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 200 mm, grinding wheel diameter: 250 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,350 kg, Equipment: CE marking, documentation/manual, JONES SHIPMAN 524 EASY SURFACE/PLANE GRINDER Ledpfxow Tyzmj Ag Rjhp MAXIMUM GRINDING DIMENSIONS: 500x200 mm ELECTROMAGNETIC TABLE SIZE: 500x200 mm STANDARD WHEEL SIZE: 250x20x76 mm MAXIMUM WHEEL SIZE: 250x25x76 mm CONTROL SYSTEM: FANUC GE MOTORS & DRIVES: FANUC OPTICAL SCALE MEASUREMENT SYSTEM: HEIDENHAIN MAX WHEEL SPEED: 4000 RPM MACHINE WEIGHT: 1350 KG

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Lhjdpfx Agsrw A Eio Rjp 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min Lsdpjt Tqrnofx Ag Rehp total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Lhodpov T Rhasfx Ag Rjp Manufacturer: Elb Type: Smart NG STC SN: 511210608 Control: Siemens, type: Simatic Multipanel Touch Magnetic clamping table, 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle output: 4.3 kW Grinding spindle taper: 36 mm Max. vertical travel: 475 mm Max. transverse travel: 370 mm Machine weight: 3,800 kg Machine dimensions: L/W/H 2,750 x 2,050 x 2,150 mm, Electronic handwheel for Y/Z axis, Dressing unit with dressing compensation/diamond dressing, height adjustable by 22 mm, Wet grinding unit with 50 l cooling pump, 60 l automatic paper belt filter, Distance measurement in the Y/Z axis via rotary encoder

Condition: used, Sharpening machine EWAG WS 11 SP Lhodpfx Aowp T Nkjg Rop

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Lodpfx Agovdal Ao Rehp Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Lhsdpfx Aot Hwzijg Rjp Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: excellent (used), Year of construction: 2005, Arburg 370S-800-150 Closing 80 TO Scrow 30 mm Bar spacing 37x37 Control S Lsdpfxoidmc Ij Ag Rehp Year 2005 Operating hours 46201 ST Plus sprue picker

Condition: used, in different sizes PressPower 22T-24T Bearing tracks Piece Price plus VAT Lsdpfx Aohbqtmjg Rohp

Condition: used, Year of construction: 2007, grinding range 600 x 450 mm magnetic plate size 600 x 400 mm grinding wheel size 300 x 50 x 76,2 mm total power requirement 11 kW Ledpfsvy Ip Isx Ag Rohp weight of the machine ca. 2,1 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale