Hogger

Zerbrik PZ 63-1

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Chsdpfx Alen Nv H Ssbsb Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Csdpjua Tbwsfx Albjhb Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Martin T 65 panel saw Heavy-duty precision panel saw 3.5” LCD color display Motor: 5.5 kW Saw blade can be tilted from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm Parallelogram crosscut table for tilting up to 46° on both sides, LCD display, 0.01° fine adjustment for cutting angle Analog length stop with 2-point system Rip fence length: 3,000 mm Cutting width with parallel fence: 1,100 mm Fence adjustment via handwheel Fence position readout via control panel CE version Chedpezkhk Aofx Albsb Year of manufacture: 2012 Machine is WORKSHOP-TESTED and in TOP condition, from a craft business available ex works

Condition: good (used), Year of construction: 2007, functionality: fully functional, Granulator, separator for copper or aluminum cables. Feed rate: 9 m/min Capacity: 150 kg/h of granulated cable. Granules approx. 3 mm and a copper content range of 50%. 15 kW 400 V 50 Hz Codpfjxxirwox Albehb INSTRUCTION AND MAINTENANCE MANUAL AVAILABLE

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) Chodpfstqfhxjx Albjb *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Hopper opening (basic dimension) 630 x 800 mm Main motor 18.5 kW Sieve perforation: standard Hopper volume (basic hopper approx. 0.6 m³) Rotor diameter approx. 260 mm Number of cutting blades 30 (29 pieces – one blade is broken) Suction nozzle 160 mm Cjdpfx Aozkp Rdelbohb Weight max. 1300 kg PLC control

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used Holz-Her Cut 6120 - Year of manufacture: 2010 - Availability: End of September 2026 - Automatic cutting height adjustment - Scoring unit Codpoziwqpsfx Albjhb - Saw blade projection: 82 mm - Label printer - Cutting length: 4400 mm - Electronically controlled pressure beam and saw carriage for short cycles - Grooving program / motor-adjustable

Condition: excellent (used), Year of construction: 2020, Powerful hacker or shredder with 45 kW motor, also suitable for plastic. Rotor width: 1000 mm, rotor diameter: 360 mm, approximately 50–60 blades on the rotor. Inclined conveyor belt with magnetic roller available separately. Csdpfxjw Tdudj Albohb

Condition: used, Year of construction: 2001, saw blade diameter min. 200 / max. 500 mm Speed 2800 / 4000 / 5500 U/min. Chsdpfx Aljzczf Eobeb

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 Cjdpfxezk N U Ae Albehb - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach