Column jib crane jib crane chain hoist

Zasche Demag Kran Drehkran Hallenkran ZHD 500-8 500Kg L 8m Demag PK Kettenzug

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Dwedpfx Akotqwrvjvja Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop.

Year of construction: 2023, condition: new, Selling a WLO 25 KW Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 25.00 kW maximum heat output: 30.00 kW / approx. 300 m2 in set: forcing axial fan speed: 1400 rpm and capacity: 3110 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 230 kg Gross weight: 240 kg Furnace lining: 15 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Djdpfeixupmsx Akvewa Dimensions External Dimensions: Overall Width: 485mm x Overall Depth: 900mm x Overall Height: 1310mm Oven dimensions: Width: 390mm x Depth: 460mm x Height: 540mm Upper door dimensions (sheet 3 and 4 mm): width: 390 mm x height: 230 mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 155mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 310mm x Height: 210mm Center & Bottom Loading Port Dimensions: Width: 310mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Diameter exhaust outlet: Ø 130mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 350mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.58A Speed: 1400 rpm Air flow: 3110 m3 / h Safety: CE mark + protective net

Condition: used, Technical details: Dwjdpfx Akju Nxnkovoa lifting capacity: 1,0 t Arm length: 3500 mm height lower edge cantilever arm: 3900 mm cantilever arm length from center column: 3750 mm lifting height max. hook position: 4000 mm column diameter: 400 mm total power requirement: 0,76 kW dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m Column-mounted slewing crane with small foot flange octagonal 750 x 750 x 21mm - operation floor-operated pendant control - slewing electric/motor driven - jib LxWxH: 4100 x 125 x 300mm The crane is equipped with a new electric chain hoist STAR LIFTKET 1,0 to with electric trolley. Type 1000/2-4/1 Design 1000/2-4/1; lifting height 4.0m, lifting speed 4/1 m/min. Function: electric driving on carrier, up and down, as well as swiveling. without clamping plate! *

Condition: used, Mechanical punching tool with a punching force of 1000 kN. Dedpfx Asf Nwqaskvswa Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of stamps and matrices is part of the delivery scope.

Condition: used, arm length 6000 mm weight max. in kg 250 kg swivelling range . Grad height 3800 mm Crane number 1.26 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Dedpfsyqvcuox Akvewa We look forward to your visit. Your Markus Hirsch Team

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK FM300S Dust Collector is a high-performance dust extraction system designed for intensive operation in woodworking shops, furniture manufacturing facilities, and the timber industry. Equipped with a 2.2 kW motor, large-capacity collection bags, and an extraction capacity of up to 3,900 m³/h, this industrial sawdust collector provides efficient and safe dust removal even in demanding production environments. Key Features 2.2 kW / 400 V motor – designed for continuous industrial operation. Dodpfx Asvu Artskvowa Airflow capacity of 3,900 m³/h – efficiently extracts sawdust and wood chips from multiple workstations simultaneously. WhirlWind multi-blade metal impeller – dynamically balanced to ensure quiet, stable, and vibration-free operation. Reinforced steel construction with additional supports – provides excellent durability and structural rigidity. Quick-release bag mounting system – enables convenient operation and fast bag replacement without tools. Mobile base with bearing-mounted wheels – allows easy movement around production halls and workshops. Highly sealed extraction system – four flexible sealing elements at critical points minimize air leakage and maintain suction efficiency. Construction and Technology The CORMAK FM300S woodworking dust collector is equipped with a WhirlWind series metal impeller, precisely balanced and designed for intensive industrial use. The entire structure has been reinforced with additional supports and brackets capable of handling the weight of fully loaded collection bags. The housing is manufactured from thick steel resistant to deformation, while specially designed sealing elements improve system tightness by reducing vacuum losses and increasing overall extraction efficiency. Performance and Efficiency The FM300S delivers excellent extraction performance when operating with multiple machines simultaneously. The system allows connection through: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The large filtration surface and four high-capacity bags (2 filter bags and 2 waste collection bags) enable long periods of maintenance-free operation with minimal downtime. This powerful sawdust extraction system is designed to meet the requirements of demanding professional users. Applications The CORMAK FM300S is ideal for: Furniture manufacturing plants and professional woodworking shops – as a central chip extraction system for multiple machines. Industrial workshops processing wood, MDF, plywood, and other wood-based materials. Production lines requiring reliable dust extraction as part of automated processes. Technical schools and training centres – providing an efficient and safe solution for educational workshops. Standard Equipment 2 fabric filter bags 2 plastic waste collection bags Metal mobile base with bearing-mounted wheels Optional Equipment Galvanized hose clamps High-efficiency filter cartridge with filtration down to 2 microns Technical Specifications Specification Value Airflow capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Collection bag capacity 150 L Number of bags 2 × fabric (filtering), 2 × plastic (waste collection) Extraction inlet 1 × Ø150 mm or 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 1,960 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual (DTR) CE Declaration of Conformity Yes

Condition: new, The Topaz plasma cutting machine is an advanced solution that is perfect for manufacturing operations where precision, efficiency and compact design are important. It offers reliability and high cutting quality and thus perfectly meets the requirements of modern companies. Main features: - Innovative technology solutions: Developed in cooperation with ECKERT and TEKA, offer modern functions and high performance. - Exceptional quality and reliability The machine is manufactured in Germany with components from well-known manufacturers, which ensures exceptional precision, durability and reliability. Thanks to the robust manufacturing according to demanding standards, the operating costs of the system are reduced to a minimum. - Intuitive user interface: The machine's clear and easy-to-use control system speeds up work and increases the operator's productivity. - Excellent cutting quality: Thanks to the plasma systems from leading manufacturers such as Hypertherm and Kjellberg, the machine offers the best cutting quality. Djdpfx Akjvmg N Hsvowa - The TEKA filter system: Provides clean air, which is especially important in small operations where space saving and air quality are crucial. During periods when the machine is not working, the system can act as an extraction system for welding or grinding work, eliminating the need for additional systems and reducing costs.

Condition: used, Year of construction: 1981, arm length 3600 mm total column height ca 5500 mm weight max. in kg 1000 kg travel of hook 3000 mm height of hook ca. 4000 mm Dwedpjxtqwqsfx Akvja weight of the machine ca. 1,5 t dimensions of the machine ca. 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled.

Condition: good (used), Year of construction: 2008, Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: 800 x 800 mm -Load capacity: 1000 kg -Chain hoist: SWF type SKB 080.22-FND, year of manufacture 2008 -2x lifting speed: 4.0/1.0 m/min -Reach: 2100 mm -Total height: 2630 mm -Hook height: 1980 mm Dodpfxjyn Ra No Akvowa -Swivel range: 270° -Transport dimensions: 800/2640/H1500 mm -Empty weight: 458 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH373-27, 1 Vetter / Demag wall-mounted slewing crane, 250 KG capacity / lifting load Type UW2.5-6.0 Slewing radius approx. 6m, 250KG / 0.25t capacity With chain hoist, 250KG lifting capacity (2 lifting speeds) Total weight approx. 250 kg Year of manufacture 2004, with inspection logbook Complete with wall bracket, jib arm, chain hoist, cable festoon, trolley, and small parts Dwedjxz Tqpspfx Akvja Slewing range approx. 180° Item location: 75053 Gondelsheim Unit is fully dismantled and immediately available See pictures Shipping by freight or pick-up Please request shipping costs according to postal code