Horizontal lathes WMW DP1 / S3 x 4000mm

WMW DP1 / S3 x 4000mm

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Gjdpfx Aswqz D Eog Djca

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C Godpfsvwgm Hox Ag Doca weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: used, Year of construction: 1953, turning length / mm turning diameter over plate // mm faceplate diameter / mm Gcedpfsua Iw Tex Ag Dea Plane disc diameter: approx. 3600mm Centre height above plate: approx. 1500mm Turning diameter over plate: 2600mm Turning diameter in the pit: 3600mm Turning diameter over bed: 1300mm Turning length: approx. 2400mm Max. Workpiece weight: 22000kg Max. Torque on the faceplate: 5000 mkg Faceplate gear rim pitch circle diameter: 1900mm Main spindle bore: 120mm Speed range normal: 0.71-35.5 rpm increased: 1-50 rpm increased: 1.4-71 rpm Total power: 38kW Total weight: approx. 42.5 tonnes

Condition: used, Year of construction: 2002, functionality: fully functional, turning diameter: 1,600 mm, spindle motor power: 45 W, spindle speed (max.): 1,500 rpm, travel distance X-axis: 1,200 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, Daewoo Doosan PUMA V-1200M CNC vertical lathe, year 2002, equipped with FANUC Series 18-T control, designed for machining large and heavy workpieces, ideal for heavy-duty and industrial sector applications. Main technical specifications: Maximum swing and turning diameter: Ø 1,600 mm Maximum turning height: 1,200 mm Maximum workpiece weight: 6,000 kg Chuck diameter: Ø 1,200 mm RAM axes: X (horizontal): 1,200 mm Z (vertical): 900 mm C axis: 360° rotation, minimum positioning increment 0.001° Main spindle: Speed: 2 ÷ 320 rpm (2 ranges) Power: 37/45 kW RAM driven spindle: Taper ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 x 240 mm Tool turret: 16 stations, with BT-50 type tools Max. tool diameter: Ø 400 mm Max. tool length: 450 mm Max. tool weight: 50 kg Maximum tool weight in magazine: 600 kg Gcodpfx Agjwt S Rhj Doa Feeds: Rapid traverse X/Z axes: 10,000 mm/min Working feeds X/Z axes: 3,000 mm/min Included accessories: Chip conveyor Coolant tank with pumps Spindle line air conditioner Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Solid and high-performance machine for vertical machining of large workpieces with high precision.

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Gcjdpfx Ajhvml Isg Dja Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: ready for operation (used), Year of construction: 1996, 630T press retrofitted in 2010 by the company LITOSTROJ RAVNE Capacity: 630 tons Total power: 15 - 630 tons Ring power: 10 - 230 tons Gjdehh Hwlspfx Ag Doca Lifting power: 50 tons max Back pressure power: 5 - 120 tons Ejection power: 22 tons max Max slide stroke: 180 mm Ring race: 30 mm Back pressure stroke: 30 mm Slide surface: 900 x 900 mm Table surface: 900 x 900 mm Number of strokes: 28 - 72 s.p.m. Power requirement: 80 kW Default configuration

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A Gcjdexlip Aopfx Ag Dja • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: used, Year of construction: 2009, faceplate diameter 1250 mm turning height 1250 mm Control 0i-TD Fanuc max. torque at faceplate 12500 Nm max. turning diameter 1600 mm max. workpiece weight 5000 kg table speed 2- 300 min/-1 x-axis 1475 mm z-axis 900 mm Gcodpfx Agswlvifs Dja rapid traverse 10 m/min spindle cone ISO BT50 tool capacity 12 pos. total power requirement 75 kW weight of the machine ca. 32 t dimensions of the machine ca. 4,7 x 5,8 x 5,5 m CNC vertical lathe with 12 positions ATC. Spindle reception is BT 50. Control: Fanuc 0i-TD

Condition: good (used), Year of construction: 2003, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 900 mm, spindle diameter: 152 mm, FPT MAR-X 3, 2003 CNC SELCA 4045 PLUS DIGITAL, Built 2003, CNC can be changed to Heidenhein 620. FPT TRT25. Rotary Table, 25 Ton. Two axis Head, 144 x 144. X, Column travel 14.000 mm Y, Headstock vertical travel 4.000 mm Z, Ram stroke 1.500 mm W, Spindle Ø 152,4 mm 900 mm Spindle taper ISO 50 Spindle speed 0 - 2.500 rpm Spindle motor 48 kW Automatic tool changer 40 Tools FPT TRT25. Rotary Table, 360.000° 2.500 x 2.500 mm Rotary Table longitudinal travel 2.000 mm Gcodpfowdm A Hex Ag Dea Table load 25 Ton

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Gcodpfx Agouuz Iij Dsa Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set