Tool trolleys

WMT WMT 136

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) Bodpfx Aewclkyoa Eold - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm Bledpsv S Hy Asfx Aa Eed digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Bledpfsw Ix Alsx Aa Eed

Condition: new, Year of construction: 2026, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Blsdpfx Ajtz Smiea Esd Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity

Condition: used, mileage: 198,000 km, power: 357 kW (485.38 HP), first registration: 03/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Iveco S-Way AS440S49T/P * !!! RENTAL !!! * German vehicle * Leaf / air suspension * Wheelbase 3,800 mm * EURO 6E * Automatic transmission * Retarder * Double tank system 640 l + 480 l * Leather steering wheel * Full LED * Automatic lights * Automatic climate control * Auxiliary heating * On-board computer * Axle load indicator * Navigation * Hill start assist * Lane departure warning * Multifunction steering wheel * Electric windows Bljdpevvf Tvofx Aa Eod * Electric adjustable and heated exterior mirrors * 2 beds * Refrigerator * Preparation for auxiliary drive * Central locking with radio * Driver's seat with air suspension * Seat heating for driver's seat Prior sale and errors are expressly reserved! Sale exclusively under our terms and conditions Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers Bsdpfx Aaswka S Ij Ejld - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: new, range L-W-H 1045 x 5050 x 1010 mm weight 100 kg Blsdpfx Aaju Impae Eod 7 St. Workshop trolley filled with 274 quality tools. With 7 drawers and 1 door Fixed ball bearing guides (double bearings), anti-slip mat in each compartment, Thick rubber top mat, central locking, 4 heavy duty wheels 125 x 50 mm. including 2 swivel castors with brakes, 2 keys.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4", 3/8", and 1/2", including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4", 3/8", and 1/2". Drawer 3 Open-end/ratchet wrench set (approx. 8–22 mm), double box-end wrench set, and torque wrench. Drawer 4 Precision, slotted, Phillips, and Torx screwdrivers in various sizes, including soft-grip versions. Drawer 5 T-handle hex/Allen key set with ball end and T-handle Torx set (T10–T40). Drawer 6 Pliers and hand tool set: circlip pliers (internal/external), combination and needle-nose pliers, side cutters, pipe wrench, claw hammer, and center punch set. Bledpeu Img Sofx Aa Eed

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, laser power: 4,400 W, Used very clean Bystronic Bystar 3015 4.4kW for sale / flat bed industrial cnc laser for sale Bystronic ByStar 3015 4.4kW BRAND: BYSTRONIC YEAR: 2008 MODEL: ByStar 3015 APPLICATION TYPE: LASER CUTTING LOCATION: UNITED KINGDOM MACHINE TYPE: LASER CUTTING MACHINES (CO2) Fully Serviced and Well Maintained CONTROL UNIT BRAND: BYSTRONIC Technical Information BRAND: BYSTRONIC LASERPOWER: 4.4KW / 4400 watts LASER TYPE: CO2 LASER BRAND: BYLASER 4400 MOVEMENT X-AXIS MOVEMENT: 3000 MM Y-AXIS MOVEMENT: 1500 MM Machines hours: Bljdpjr Hcmrjfx Aa Ejd Cut hours: 9,000 ADDITIONAL EQUIPMENT – BYPOS – CUT-CONTROL – 2 CUTTING HEADS (5″, 7.5″)

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Bsdpfxegtx Aqe Aa Eeld Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Technical information under subject of correction