CNC Engraving and Milling Machine

WINTER ROUTERMAX MINI 6090 ROTARY

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Lodpfevvi Nbjx Aftjrp Storage location: Nattheim

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Lredet N Antspfx Aftsp Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: used, Year of construction: 2001, Universal lead and feed screw lathe Manufacturer: GDW Model: LZ 360 S Year of manufacture: 2001 - workshop tested Machine no.: 1104 071 Geometric acceptance with test protocol Centre height: 175 mm Centre distance: 800 mm Accessories: - 3-axis digital display FAGOR NVP 300 TS-RS with switchable constant cutting speed - Retrofit kit for converting tailstock from crank tailstock to lever drilling tailstock - Chuck guard with electrical interlock - Braked drive motor - Emergency stop (dual, left and right) - Quick-change tool post, base body size B - Bed stop - Rear chip guard - Removable chip tray - Coolant unit - 2 fixed centers MK 3/60° - Safety driver plate - Operation keys - CE declaration of conformity Lrjdsy H Di Nepfx Aftep - CE documentation (operation manual) Used, sold as-is without warranty The machine's technical specification corresponds to the manufacturing year.

Year of construction: 2025, condition: new, – Plate width 710 mm – Rear stop Lrsdpfxoh Ramgs Aftjp – Adjustable stroke

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Ledpfxsrb A Tcs Afterp Technical data, accessories and description of the machine are not binding.

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 Lrodpfx Aewmwrdjftep x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming Ljdpfx Afsrbz T Nstorp - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2025, Drill grinding machine suitable for grinding/sharpening twist drills, countersinks, etc. with 2, 3, or 4 cutting edges, with diameters from 5 to 75 mm. The machine has been mechanically and technically overhauled, wearing parts replaced, grinding spindle new, newly painted. The machine features automatic feed including end stop. Accessories: - Reducing sleeves MK5/MK4/MK3/MK2/MK1 including new quick-action chuck for small diameters - Diamond dresser - Operating manual - Ejector tool for MK5 to MK1 - Coolant system, new including new coolant pump - Machine LED light, new The machine can be tested under power or inspected upon request. Lrjdpfjydc Htox Aftsp Operating voltage: three-phase current

Condition: new, empty load weight: 8,000 kg, maximum load weight: 80,000 kg, overall weight: 88,000 kg, axle configuration: 4x2, first registration: 11/2024, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,400 mm, loading space height: 1,100 mm, suspension: hydraulics, color: light blue, Year of construction: 2025, operation weight: 88,000 kg, Heavy-duty industrial transport trailer with hydraulic lift eight axles that hydraulically raise and lower the trailer via a control valve all-wheel steering can be coupled on both sides, at front and rear transport floor made of 50 mm Douglas fir or without floor according to customer requirements optional with hand brake or air brake system optional lighting system on both sides Ledeva E Tkjpfx Afterp further information available upon request.

Condition: new, functionality: fully functional, Comec RV516.ASM Valve refacing machine – new machine With standard equipment and variable valve speed device. Technical details: Valve stem diameter: 4-16 mm Valve stem length: 55-230 mm Valve head diameter: 114 mm Face angles: 0° - 60° Grinding wheel speed: 2800 RPM Main grinding wheel diameter: 215 mm Voltage – Hz – phases: 400V/50Hz/3 Fázis Main dimensions: W x L x H: 700 x 600 x 700 mm Weight: 142 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines Lrsdenbdlmepfx Aftop