Temperature cabinet 990 liters

Weiss WT3-1000/40 -40°C bis +180°C

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80 water cooled Cold-heat operation: -75°C ...+180°C Climatic operation: +10...+95°C Humidity range: 10...98 % r. h. Temperature constancy, temporally ± 0.2K Humidity constancy: ±1 r.F. Temperature rate of change: Cooling: approx. 1.4 K/min Heating up: approx. 2.5 K/min External dimensions: Height 1980 mm, width 1265 mm, depth 1365 mm Feedthroughs: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/ 50 Hz Power: 10,4 kVA Weight: approx. 720 kg Refrigerant R404a / R 23 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Iedpfx Aem Tvzcekxoia

Condition: excellent (used), LDS Type: V895-440 HBT900C with amplifier SPA50K Technical data: Fitting Dimensions: 440 mm Sinusoidal force vector 55.6 kN (peak) Rausch force vector 55.6 kN (effective) Half sine force vector 166.8 kN (peak) Frequency range 0 to 2100 Hz Isdpfjuy H I Tox Akxjia Sinusoidal acceleration max. 981 m/s² Noise Acceleration max. 490 m/s² Speed max. 1.6 m/s Deflection ± 63.5 mm Oscillator mass 55 kg Max. load 700 kg Amplifier dimensions : WxHxD mm : 537mm x 1905mm x 895mm Weight 622 kg Sliding table: Work surface: 900 mm * 900 mm Thickness of the top : 50 mm Weight of the top: 80.4 kg Max load : 7250kg Effective frequency range 5-2000 Hz Condition : gebraucht / used Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: LxHxW approx. 2700 x 1500 x 1800 mm Scope of delivery: (see pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible. Iodpfxjv R Exus Akxoia

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Isdpfxexdi Eze Akxjia Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: good (used), Here we are offering an LDS shaker system with the following components: LDS PA 2000 Power Amplifier Iodpfx Aeh D Hlfokxsia Vibration Exciter LDS V 726 Vibration Control System Solartron Mobrey SI 1215 LDS Vibration Level Limiter LDS VLL-1 The system was used for space simulation tests.

Condition: excellent (used), Vötsch Type: VCL 7003 Air-cooled climatic test chamber Test chamber capacity approx. 34 liters Capacity for temperature tests: Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity over space ±0.5 to ±2.0 K Heating rate of change 4.0 K/min Cooling rate of change 3.0 K/min Heat compensation max. 550 W Isdpfjv Tnd Sjx Akxsia Temperature calibration value +23°C and +80°C Capacity for climatic tests: Temperature range +10 to +95°C Humidity range 10 to 98% Humidity deviation over time ±1 to ±3% Temperature deviation over time ±0.3 to ±0.5 K Spatial temperature homogeneity ±0.5 to ±1.5 K Climate calibration values +23 °C / 50% RH and +95 °C / 50% RH Test room dimensions: Width 350 mm, Depth 300 mm, Height 310 mm External dimensions: Width 640 mm, Depth 750 mm, Height 1730 mm Electrical connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated current 11.0 A Rated power, max. 2.5 kW Sound pressure level 59 dB(A) Refrigerant: R-404 A / R23 Weight approx. 130 kg For your safety, please note the following information as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Iedpfx Aerbiyfekxoia Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, External circulating bath, circulating thermostat, temperature bath, water bath, circulating bath BROOKFIELD Type TC-102D Serial No. D07200476 Temperature range: +5 °C to +150 °C Temperature stability: ±0.05 °C Iodpfx Aexcbnxekxoia Temperature uniformity

Condition: good (used), Weiss Type: WK3-600/70 Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating: 4.0 K/min Iedpfx Akjw Inmmsxeia Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatially: ±0.5 to ±1.5 K Heat compensation max.: 2,500 W Specifications for Climate Testing: Temperature range: +10 to +95 °C Dew point temperature range: -3 to +94°C Humidity range: 10 to 98 % rH Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % rH Temperature uniformity (spatial): ±0.5 to ±1.0 K Heat compensation max.: 500 W Test chamber volume: 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1,998 mm, Width 1,000 mm, Depth 1,745 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R404A & R23 Weight: 680 kg Important information for you as the buyer: The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change. Errors and omissions excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), Here we offer a LDS shaker with power amplifier and control unit. Shaker technical data: Shaker type V 875 Peak force SINUS 35,6 kN (peak) Peak force RAUSCH 35,6 kN (rms) Peak force SCHOCK 106,7 kN Max acceleration SINUS 1078 m/s2 (peak) Isdpfxong Ef Te Akxoia Max acceleration RANDOM 735.5 m/s2 (rms) Max velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation modes horizontal, vertical, arbitrarily tilted Excitation modes: Tests with sinusoidal excitation Tests with noise excitation Tests with sinusoidal and noise excitation Tests with shock-shaped excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile. (Long Time History LTH). Here, a real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types for signal analysis Possible data types for the representation of the TRANSMISSION FUNCTION [transmibility(f)]. Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phas log Mag+Phase V875 vibrator 440 mm SPA40K 35,6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Type: SPA56/40K v3 V875 TC Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.