Rotary table, indexing table, positioner

WEISS Positioniertisch Tc 700 T (3331)

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. Chedpfx Aiou N D Tls Nsa *

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg Codpfedzqa Hsx Ai Neha In good condition

Condition: used, inner taper of milling spindel / collet diameter / turning speed range 1500 U/min Chsdpfx Ajhwt Eloi Noa

Condition: used, inner taper of milling spindel / collet diameter / turning speed range / U/min Codpfohprk Hjx Ai Nsha

Condition: used, Year of construction: 2001, functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm (total height 625 mm) Table size Ø 1180 mm Top table plate Ø 1300 mm, Table load approx. 5000 kg Cedpfx Aioyg N Hrs Njha Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Tangential torque with motor operation 7200 Nm Total weight 3.800 kg without fixators, without installation and commissioning

Condition: used, Year of construction: 1985, functionality: unexamined, Rotary and sliding table | Brand: SKODA | Type: SEA40P Year of manufacturing: 1985 The table can be inspected by prior arrangement. TECHNICAL SPECIFICATIONS: - Control: variable - Measurement systems: Heidenhain - Axis drives: Siemens - Maximum table load: 40 tons - Table clamping area: 2.400 x 2.400 mm - Total height of the rotary table: 1.210 mm - Table stroke (W-axis): 2.500 mm - Inner circular guide: * Centre diameter: 1.210 mm * Guide width: 250 mm - Outer circular guide: * Centre diameter: 2.200 mm * Guide width: 165 mm - Feed rates, infinitely variable: * Longitudinal feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10,000 mm/rpm * Rotational feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10.000 mm/rpm - Rotational feeds, relative to the diameter: 1.600 mm - Motor torque (speed): 170/300 Nm/rev - Total power requirement: 120 kVA - Table weight approx.: 28 tons - Dimensions L/W/H: 7,3 x 3,5 x 1,21 m ACCESSORIES/EQUIPMENT: - Control cabinet for the table positioners, power electronics, positioners (without control) - Documentation Chodjzgu Uaopfx Ai Nsa No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale.

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever Cjdpfxjxf Uytj Ai Noha - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 225 kg, faceplate diameter: 400 mm, DIVIMEK Meca DCN-400 NC rotary table Previously used on a Hedelius machine with Siemens 840D control Cedpfx Aiozn Iv Hs Neha Fully functional Includes ROD encoder Available for immediate delivery

Condition: used, enninger high-speed milling spindle SK40 Type 801 M326 Csdpfsvyg A Tex Ai Noha Ratio: 1:6 Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm without collets

Condition: excellent (used), Manual rotary table Ø 450 mm Total height: 150 mm Base dimensions: Length 580 mm x Depth 500 mm Weight: approx 150 kg Cedjzmw T Eepfx Ai Neha In very good condition