Moulder

Weinig Unimat 30 EL

Condition: ready for operation (used), Technical characteristics Working width : 20 to 300 mm Working height : 8 to 120 mm Feeding speed 6 to 46 m/min Heavy drive (15 kW) 9 shafts Superior soundproof option Composition : Lower spindle 11 kW, diameter 50 mm Right-hand spindle 11 kW, diameter 40 mm Left-hand spindle 11 kW, diameter 40 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Upper shaft 11 kW, diameter 50 mm Lower shaft 11 kW, diameter 50 mm Machine sold with input mechanization : chain transfer 6000 x 2500 mm Special configuration, ideal for parquet and deck boards Power and Motors Voltage: 400 V Pluging: Three-phased Power: 114 Kw Motor: 9 x 15 CV Pgedper Av T Hefx Ahvji Overall dimensions Lenght: 5200 mm Width: 2200 mm Height: 1800 mm

Condition: used, Number of boring spindles 10 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Pgodpfxew H Iv Ts Ahvei Feed speed 6-36 m/min.

Condition: good (used), Weinig Hydromat H23 50mm spindles 6,000 RPM Bottom 15kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Right 11kW jointer ready Left 11kW jointer ready Top 15kw jointer ready Bottom 11 kw jointer ready (straight jointer) + outboard bearing Top 11kw jointer ready (straight jointer) + outboard bearing Bottom 15 kw jointer ready Pjdpfxswmw Nve Ahvsgi Possible to add additional straight / profile jointers as needed !!! 15kW feed motor. Automatic lubrication system. Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), Remote-controlled quick clamping cars fully hydraulic with hydraulic Help car. Podod Nqrqspfx Ahvogi Track width 840 mm. Control Panel and electric control cabinet.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 108111, functionality: fully functional, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Psdpfovrq U Dsx Ahvegi

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Pgodpfx Ahswvqklevsi Errors and prior sale excepted.

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Podoxlcufspfx Ahvjgi Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: Pgodopvi Skjpfx Ahvoi - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Condition: new, Board stacker BSx2 with pure mechanical stacker arms or pneumatic rotatable. With steel or plastic chain. Infeed sever conveyor, zero set rollers or without them. We have all that options. Specification: 1. Feed (machine) speed: 9 layer/min. Pgodpfxeiyztzj Ahvei 2. Lift capacity: 3 tons. 3. Step rate: 17 m/min. 4. Package size: 1200x1200x5000 mm. 5. Feed conveyor type: steel chain (plastic- optional). 6. Options: infeed belt conveyor. 7. Motor (Lift): 3 kW, 230/400 V, 50 Hz, with brake. 8. Motor (forks): 1,5 kW, 230/400 V, 50 Hz, with brake. 9. Motor (conv.): 1,1 kW, 230/400 V, 50 Hz, with brake. 10. Motor (positioner): 1,1kW, 230/400 V, 50 Hz. 11. Air consumption: 7 L/min (6 bar). For more options or information, feel free to contact us!

Condition: ready for operation (used), Year of construction: 2002, Vehicle description Diesel Sideloader JUMBO 50/12/45 year 2002 lt. Counter 3.724 hours 5 tons lifting capacity 4,5 meters lifting height 1.2 meters fork length Psdpfxsid R Dno Ahvsgi Selling price: 21.950,-- net Also favorable delivery possible !!!