Sharpening machine

WEINIG RONDAMAT 960 POWERLOCK FULL AUTO

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Giedpfjt Sc T Isx Acwjr Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. Gjdpewgbw Refx Acwjir 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Gjdpshm Exdofx Acweir Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros.

Condition: repair required (used), functionality: not functional, Finger-jointing line Dimter HK 400 for only fifteen thousand seven hundred EUR. Finger-jointing plant for timber packages. Wood input lengths: 800 - 6000 mm. Milling height: 285 mm (optionally 300 mm). Colour: blue. Requires repair, sold as-is in its current condition. The plant has already been disassembled and is stored at the warehouse in Achern. Lots of material for little money. All technical documentation available. We will also provide you with technical support and answer all your questions. Godpjvi Hw Nofx Acwsir

Condition: used, Year of construction: 2023, functionality: fully functional, CLT Cross-Laminated Timber (CLT) production line with CNC machining center Capacity: approx. 25,000 m³/year (2-shift operation) Functional Description / Scope of Supply: - Longitudinal lamella feeding: Loading – Singulation - Cross lamella feeding: Loading – Vacuum destacking – Feeding to planer - Formation and buffering of longitudinal layers: Longitudinal layer preparation and discharge station - Formation and buffering of cross layers: Two-stage cross layer buffer – Cross layer discharge station - Layup and gluing area: Vacuum layup gantry – Adhesive application gantry – Layup table - CLT press: TimberPress X331 - Outfeed area after CLT press: Cross transfer carriage to buffer stations, Reichenbacher system and discharge station with flipping unit - Reichenbacher CNC machining center CLT blanks (LxWxH): Min.: 6,000 x 2,000 x 60 mm Max.: 12,040 x 3,140 x 350 mm 3–9 layers Raw material: Longitudinal layers (LxWxH): Min.: 6,000 x 100 x 20 mm Max.: 12,040 x 280 x 50 mm Gisdpfx Acoxzy N Sswsr Cross layers (LxWxH): Min.: 2,000 x 105 x 23 mm Max.: 3,140 x 285 x 53 mm Price and further information available on request.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Finger Jointing Line GreCon Turbo-S 1000 Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine description: For sale: GreCon Turbo-S 1000 finger jointing line, year 2007, designed for efficient production of finger-jointed solid wood components. The Turbo-S 1000 is a well-known and proven GreCon solution for high output, precise finger profile machining and consistent joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts and solid wood elements for further processing. Depending on configuration, tooling and equipment, the line can process both softwood and hardwood. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional working width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Glue application system: FlankenJet - Number of press channels: 2 - Frequency-controlled feed - Material: softwood and hardwood - Machine type: high-performance finger jointing line - Application: production of finger-jointed solid wood components Features / advantages: - High production capacity - Excellent joint quality Giedpoyu Up Ijfx Acwsr - Proven GreCon technology - Suitable for continuous industrial production - Compact and robust design - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling, press length and installed options. Manufacturer material for the Turbo-S 1000 series also shows high line output depending on joint orientation, timber dimensions and press configuration.

Condition: excellent (used), Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Gijdpfx Acjwl Ibgswsr

Condition: good (used), Year of construction: 2011, Weinig Conturex C4500 CNC Window production machine Description; Year of construction: 2011 Working width 25-260mm Working heigth 10-150mm Powergrip clamping table 3.000 mm Workpiece length 180-4500 mm First processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Second processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Powergrip outfeed Tool warehouse 110 positions (87,5 mm distance) Waste conveyorbelt Full description on request Giedeydkzxspfx Acwjr Available approx. wk 30/31 - 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2006, total height: 1,700 mm, total length: 1,200 mm, total width: 1,300 mm, Empty weight: 750 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 108442 - Transport dimensions: 1200mm x 1300mm x 1700mm (l x w x h) - Transport weight [kg]: 750kg Giedpfxjyu Sb Ie Acwer - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1995, machine/vehicle number: 6017, functionality: limited functionality, stroke length: 600 mm, total length: 13,500 mm, total height: 2,090 mm, operating pressure: 250 bar, Price on request. For sale: 3 double-sided, hydraulic vertical solid wood presses from Minda. We are offering three high-quality solid wood presses manufactured by Minda for sale. The presses can be purchased and operated individually or as a complete package. Technical Specifications: - Design: Double-sided, hydraulic vertical press - Number of press chambers per unit: 2 - Application: Pressing lamella packages into beams or glulam according to DIN 1052 - Pressure monitoring: Automatic - Pressure shoe clearance: 800 mm Special feature: The press force of the first pressure shoe can be individually adjusted – ideal for the production of glulam beams of various lengths. The machines are in good condition. Availability: Immediately Sale: Individual units or as a complete package Location: Allendorf Technical Data: - Max. pressing length: 13,500 mm - Max. lamella width: 320 mm (chamber width 395 mm) - Min. lamella width: 85 mm - Chamber height: approx. 2,090 mm (clear opening) - Pressing height: max. 2,000 mm / min. 1,550 mm - Specific press force: 1–12 kp/cm² - Vertical cylinder stroke: max. 600 mm - Horizontal pressing force per side pressure unit: approx. 8 Mp - Horizontal cylinder stroke: max. 312 mm - Infeed height of roller conveyor: approx. 920 mm - Feed rate: 15 m/min - Vertical pressure point spacing: 400 mm - Horizontal pressure point spacing: 800 mm (1,600 mm) Giodpfx Aewwgz Ascwer Operating pressure: (Fill pressure) min. 50 bar (Pressing pressure) max. 250 bar