Moulder

WEINIG POWERMAT 2400 (5S) 60m/min

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Hodpfx Apjx Exbdodow

Condition: like new (used), Year of construction: 2023, Weinig Powermat 700 (Solid Profile P700) 6 spindle four-sided planer machine * Machine as new, 0 operating hours * 6x Weinig Powerlock with 8000 RPM Hjdpfozy Nvlex Apdow Bottom - right - left - top - top - bottom Feed speed 5-40 m/min Infeed table 2 meters Axial and radial CNC adjustments for spindles 2, 3, and 5, 6 Radial CNC adjustment for spindle 4 Table surfaces with Marathon coating Automatic Waxilit pump Operating concept Comfort Set Powercom Plus

Condition: used, Year of construction: 2018, operating hours: 1,443 h, lifting height: 20,500 mm, fuel type: diesel, construction height: 3,300 mm, gearing type: automatic, Equipment: cabin, Dieci Telescopic Handler Pegasus 50.21 Series: Pegasus 50.21 Remote control Rated load capacity: 5000 kg Load center: 500 mm Tires: 18/22.5 Reach: 18.1 m Load capacity at max. reach: 400 kg Lifting height: 20.5 m Load capacity at max. lifting height: 2500 kg Operating weight: 17480 kg Transport length: 7.15 m Transport width: 2.38 m Transport height: 3.03 m Travel speed: 40 km/h Max. gradeability: 40% Engine power: 96 kW 4x hydraulic outriggers + Work platform Hedpfx Apez Ec A Tedjw + Pallet forks + Winch We would be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sales excepted.

Condition: used, REX HOMS-410K — 12-Spindle Four-Side Moulder Manufacturer: REX Holzbearbeitungsmaschinen (Georg Schwarzbeck GmbH & Co KG), Germany Model: HOMS-410K Hedpoztxyysfx Apdsw Machine No.: 22.303 Year of manufacture: 1998 Voltage: 400V / 50Hz Number of spindles: 12 Feed mechanization: HIT Operating hours: ~6,000 mth

Condition: used, Hydraulic scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of manufacture approx. 1980 Load capacity approx. 5 tons Platform size 1700 x 1100 mm Stroke max. 515 mm Overall height of table (bottom) with rail rollers 535 mm Overall height of table (bottom) without rail rollers 480 mm Table height when raised (with rail rollers) max. 1050 mm Table height when raised (without rail rollers) max. 995 mm Travel speed of rail system approx. 8.5 meters/min. Motor power 4 kW Power supply 400 volts, 50 Hz - Hand-held control for raising and lowering on cable Hodsd I Nrpepfx Apdow - Safety limit switches - Hydraulic system with tank mounted on the base frame - Lifting scissors with two lifting cylinders - The table could be moved on rails, with 4 rollers on the base frame, Ø 200 mm - Drive for the rail rollers via SEW geared motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm Weight approx. 1.3 tons Good condition

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 338 kW (459.55 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 338 kW / 460 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of rotors: 48 • Rotor speed: 1300 rpm • Tow hitch: 40 mm • Fiberizing of organic material for composting up to a diameter of 30 cm • Shredding of old wood, waste wood up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typos not excluded. Hedpfszdtzmjx Apdow - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 1993, Generator set / emergency generator Manufacturer: Leroy-Somer Type: LSA 44.1L6 AREP Year of manufacture: 1993 Continuous power: 80 kW / 100 kVA Voltage: 400 V (three-phase) Frequency & speed: 50 Hz at 1500 rpm Current: approx. 144.3 A Hjdoztnfrspfx Apdsw 191026ä

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,178 h, empty load weight: 16,095 kg, Manufacturer: Manitou Type: MRT 2150 Privilege Year: 2010 Capacity (t): 4,999 kg Hours: 5,070 h Mileage: 3,178 km Hsdsz Aqyqepfx Apdew Lift height: 20.60 m Weight: 16,095 kg Ground clearance: 0.37 m

Condition: excellent (used), functionality: fully functional, Working dimensions: 230x160mm Spindle configuration: 1. Lower 15kW – Powerlock 2. Right 15kW – Powerlock 3. Left 15kW – Powerlock Hjdpfxozi Tz Rj Apdow 4. Upper 22kW – Powerlock 5. Lower 15kW – Powerlock 6. Upper 30kW – Powerlock 7. Lower 15kW – Powerlock Feed drive - 7.5kW Spindle speed 12,000 rpm Pneumatic pressure rollers for the infeed Feed drive on cardan shafts Smooth feed speed adjustment 6/36 m/min Automatic lubrication of the table Table made with MaratonCoating technology Control system: PowerCOM with motor control in Polish Soundproof cabin VibroControl vibration sensor Year of manufacture: 2010 Highnech E1 feeder, 2010 Infeed rollers driven by a 7.5 kW hydraulic pump.

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm Hsdpfxozl Hbio Apdsw - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...