Planing lines

Waco HM200X, SYSTEM HALL

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, with spraying unit Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Gtsdpfswww Iyex Agbjt Extraction device Av 21 CSMA 540 Extraction SE - separation conveyor Drive power: 4 x 132 kW Feed rate up to 150 m/min

Condition: new, Ramp 10T premium, internal usable width 2m TM-GROUP, the best choice on the market. ⭐️ Galvanized ramp grating! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum lifting capacity: 10 tons - Internal width of the ramp: 2000cm - ELECTRIC and manual control of the ramp height 1m - 1.6m - galvanized ramp grating - Reinforced ramp barriers on both sides - Solid rubber transport wheels - Central ramp handle allowing the ramp to be moved with a forklift - Adjustment of the angle of inclination and height of the flap - Double-sided, reinforced ramp supports - Moving elements of the ramp equipped with lubricators Gtodpfxewa Smpe Agbjt - The ramp is also equipped with a reel ✅ Ramp grating: - Galvanized grating with anti-slip grooves. Safe and secure ground. Forklift and pedestrian traffic are guaranteed the best possible traction and solid support. The competition mainly offers ramps in which the approach is made of sheet metal covered with mesh. Our product has the aforementioned grid with grooves - a much more durable solution, thanks to which dirt from under the forklift wheels does not remain on the ramp, and the truck itself does not slip. ✅ Forklift handle - can be installed on both sides: - Convenient and quick attachment for the forklift allows the ramp to be transported in all directions. A specially designed handle allows the ramp to be maneuvered even in limited space. ✅ Chain for connecting to a TIR, wagon or permanent warehouse ramp: - A solid steel chain is another advantage of our ramp, additionally, the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side barriers: - Safety barrier with the possibility of unscrewing and installing a frame/roof (roof is optional). ✅ Electric control of the ramp height: - Smooth electro-hydraulic drive uses a high-class pump. The pump requires 230V, so it can be operated from a regular socket. ✅ Double-sided hand pump: - Hydraulic pump for height adjustment in the absence of the possibility of connecting to the electro-hydraulic power supply - double-sided lifting. This is an excellent solution ensuring work in all conditions. ⭐️ We offer the following variants: ⭐️ - Driveway width in the ranges of 1700 cm, 2000 cm and 2500 cm Standard, Premium and Premium plus. - Mobile ramps with a load capacity of 10 tons, 15 tons and 20 tons and 25 tons. - Thickness of driveway grids 3 - 5 cm. - Colors: red, blue, black and green (it is possible to produce a ramp in any color - individual order) - Mobile ramp with tarpaulin. As a manufacturer, we can produce ramps for special, individual orders - with different dimensions, load capacities or variants. Do you need an individual solution that you cannot find by browsing all the ads? Ask our specialist. Tags: Loading ramp, unloading ramp, loading ramp, mobile ramp, loading dock, loading dock, mobile loading ramp, mobile loading ramp.

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW Gedpfxjh Dwl Do Agbstt 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors. Gjdpfjh U A I Rjx Agbott

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Gtjdpfx Ajikvliegbet Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, feed length Y-axis: 6,000 mm, Kippwanne für Baumstämme bis zu 6 m länge. Tipping tray for logs up to a length of 6m Gtodpfxsr Iig Ds Agbot Verfügbar ab September 2024 Available from September 2024

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Gtodpfshclffsx Agbot Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B Gsdpfx Aog Hkmrjgbjtt - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Year of construction: 2006, condition: like new (used), Pneumatic crushing and sizing machine for band saw blades. Gsdpfx Agody A A Nobstt

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Gedpfx Agjggghmobett