Throughfeed machining center

Vitap K3

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. Hnsdpjzvduujfx Aitsu The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Hnjdpfx Aeh E Sgheitju Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Used CA200 grinding machine 2 CNC-controlled axes for sharpening double and single knives rear pusher, mist extraction, automatic blade toothing motorized yoke, variable grinding wheel speed blade loading arm Hnjdsyupv Ajpfx Aitju

Condition: used, Year of construction: 2018, Vertical CNC boring and machining center Workpiece length 200 - 3,050 mm Workpiece width 70 - 850 mm Workpiece thickness 12 - 60 mm Milling spindle 1 unit Main spindle power 5 kW Hodpfx Aozuw Dtsitenu Max. speed 18,000-24,000 rpm (depending on configuration) Tool interface HSK-F63 or ETP25 Tool changer 4-position magazine Vertical boring spindles 13 Horizontal boring spindles X 4 Horizontal boring spindles Y 2 Nut saw X-direction Control system Homag powerTouch / Power Control PC 86 Software WOODWOP 7.x Total connected power 11.5 kW Compressed air requirement 7 bar Machine weight approx. 1,580 kg Installation dimensions (L W H) approx. 2,950 1,984 1,895 mm CE marking

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Hnodpfx Aieh Invrotju Conventional control with operating panel Full-fledged lapping machine, conventional control

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray Hedoycvaqjpfx Aitenu - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz Hnjdpfx Aijg Du Aqstou 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: new, Year of construction: 2026, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch Hsdpfx Aijvmpnlstonu -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Hsdpfx Asnacu Doitsnu Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: M254, type of input current: AC, input voltage: 380 V, total width: 4,000 mm, total length: 3,000 mm, total height: 150 mm, Equipment: documentation/manual, Due to relocation of production, this machine has been put up for sale. Our business consists of selling essential oils that were filled with this machine. Hnedpevkcavjfx Aitsu Operating instructions available.