Baler

Presona AB LP 80 VH1

Year of construction: 1988, condition: good (used), machine/vehicle number: 14684/1, suitable for copper cable and plastic recycling Kwjdpfxsnvdq Ns Ahvew

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. Kodpfx Ahjbqt Arjveww For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request.

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. Kodpfjx Nkhqox Ahvoww All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: good (used), Year of construction: 2006, operating hours: 1,522 h, Manufacturer: Husmann Typ: SPB 22 SEN-E Build in: 2006 Ksdpexbpr Ajfx Ahvsww Volume: 22m3 Back door: top hingend Lifting system: hook at the front

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Kjdpfswz Ev Tsx Ahvsww Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Year of construction: 2008, condition: excellent (used), machine/vehicle number: WK43/07, Product number: 2535 Type: Foodliner 12000/8 Serial number: WK43/07 Kwedpfxjikvlms Ahvew Year of construction: 2008 Capacity: 18000 - 22000 cups/hr Cups: round Ø 55 mm, round Ø 65 mm Seal: aluminium Compressed air: 6 Bar, 800 l/min. Water: 3 Bar, 1.5 l/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 4250 x 2000 x 1800 mm Weight: 3500 kg Including Alpha Machine Vision Solution lid inspection system Including tool trolley

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Kwsdoiyyf Iopfx Ahvew Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: good (used), Item: A-7577 Cream tank 10.000 L Kwsdoh E Dp Ajpfx Ahvow Stainless steel Process Cream tank, double jacketed, insulated scrape agitator from top, CIP mounted at top. 3 adjustable legs, manhole at top. capacity 10.000 L. We can offer 2 pieces from stock.r diameter 2458 mm

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Ksdpoic Rl Defx Ahvoww Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8t The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,530 h, functionality: fully functional, power: 129 kW (175.39 HP), For sale: Arjes Impaktor 250 EVO Year of manufacture: 10/2022 Kodpfx Ahow Nyt Ieveww Operating hours: 1530 Equipped with paddle shaft for wood, plastic, commercial waste, etc. A concrete shaft is also included. The machine is fully operational and can be inspected during operation.