Magnetic disk

VEB 1000/255/H98 mm

Condition: used, length:1800 mm Chedpjcxxu Defx Afgoc width:1200 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Csdjvt A Rtopfx Afgehc Turret head B-axis with 1° division Belt filter system included

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration Codpfx Asvcb U Aofgohc - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg Chedpfx Afjpu R Ncsgsc

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Chedpfed E Np Eox Afgjc Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: like new (used), Year of construction: 2015, machine/vehicle number: TXLT5096, turning diameter over cross slide: 220 mm, turning length: 454 mm, turning diameter: 340 mm, spindle bore: 51 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 185 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, Equipment: rotational speed infinitely variable, TAKISAWA TCY 200 YL5 LATHE • Type: TAKISAWA TCY 200 YL5 Lathe • Year: 2015 • CNC: FANUC 32iB • Travel: X/Z/Y/A 185/530/30/580 mm • C-axis • Machinable length: 454 mm • Maximum workpiece diameter above the machine bed: 340 mm • Maximum workpiece diameter above the carriage: 220 mm • Bar capacity: 51 mm • Spindle speed: 3200 rpm • Spindle power: 7.5/5.5 kW • Spindle nose: A2-6 • Turret: 12 stations • Live tool speed: 6000 rpm • Live tool power: 3.7/2.2 kW • Digital tailstock • Rapid traverse X/Z/Y/A: 20/24/10/20 m/min • Dimensions: 2880 x 1795 x 1700 mm • Weight: 4.1 t Cedpfx Aozc Edrsfgjhc • 200 mm diameter chuck with automatic control • Chip conveyor • 11 tool stations • 2 axial turning tool stations • 2 radial turning tool stations • 1 live center • Documentation • Machine available for inspection in ARDENNES.

Year of construction: 2023, condition: new, Boiler capacity: 270 l Flow rate: 680 l/min Chjdpfx Ajhmi Nqofgec Motor power: 5.5 kW

Condition: used, Technical details: honing diameter: Ø 400 mm Cjdpju Ngybefx Afgehc stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Chjdpfx Aei Dx Sbsfgjc

Condition: good (used), Year of construction: 1990, 1 used, well-maintained CNC tool milling machine, traveling column design, with CNC path control GRUNDIG Dialog 11 Table size 1600 x 675 mm Tool holder SK / ISO 40 Travel distances X-axis, longitudinal 1200 mm Y-axis, transverse 600 mm Z-axis, vertical 500 mm Table load 2000 kg Spindle speed range 20 – 6300 rpm Feed rate range, stepless 2 – 10,000 mm/min Rapid traverse in all axes 10 m/min Quill stroke 80 mm Drive power 100% ED 7.5 kW 40% ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Control cabinet weight 470 kg Accessories / Special features: • CNC tool milling machine suitable for tool and fixture manufacturing, training, and mold making • CNC path control GRUNDIG Dialog 11 • Screen graphics, dialog-guided input, 3D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets, even with islands, shifting and rotation of the coordinate system • Electronic handwheel • RS 232 interface • Swiveling vertical milling head +/- 90° • Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system • Quill adjustment 80 mm • Horizontal milling attachment Cedpfx Afehhuf Hegjhc • Full protection enclosure • Ball screw spindles in all 3 axes • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel