Throughfeed machining center

UNITEAM SPRINT 6U/40M

Condition: used, machine/vehicle number: LC594, Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACILabeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fedShrink wrapper: Acmi Fenix, film-only configurationHandle applicator: Smipack HA 35-50-70Palletizer: Alsim Valiant 1I 1P, fully automatic, push-typePallet wrapper: PM Pragometal OBS Rotomatic StandardAdvanced Automation & Control SystemsThe line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments.Production Line Integration CapabilitiesDesigned for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish.Machine Condition & Maintenance HistoryThis second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production.Operational Performance & VersatilityOptimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label appli... Lrjdpfjydn A Hsx Ahkor

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Lrodox A Hdxspfx Ahksr Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. Lrsdpfjfyadbex Ahkor The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: reconditioned (used), functionality: fully functional, power: 44 kW (59.82 HP), overall weight: 70,000 kg, total height: 5,400 mm, total length: 22,200 mm, total width: 5,400 mm, Rotary Drum Dryer Dutch Dryers - DX 3000 Rebuilt in 2021 Motor power 2 x 22 kW Drive chains and sprockets new Frequency inverter new Can be disassembled into 6 parts Total weight approx. 70,000 kg Ledpfx Ahsyxm E Roksrr Hardly any signs of wear

Condition: used, Year of construction: 2020, operating hours: 10,150 h, functionality: fully functional, machine/vehicle number: W09D20432L1A65405, power: 515 kW (700.20 HP), first registration: 03/2021, fuel type: diesel, color: green, fuel: diesel, Equipment: additional headlights, air conditioning, all wheel drive, cable winch, compressor, cooling unit, crane, fog lights, hydraulics, parking heater, ALBACH DIAMANT 2000 W09D20432L1A65405 Registration year: 03.2021 Engine: VOLVO PENTA 565kW 760hp Lredpfx Ahow Uddnsksr Rotor: Generation 6 (12-knifes), 120mm sieve Blower: TYPE 4 Accelerator: Generation 2 Crane: Type S110 F, Epsilon Equipped: DAFO vehicle fire suppression system Engine hours: 10152 h Rotor hours: 4405 h Full maintenance and repair history. Technically clean machine, ready for work w/o investments.

Year of construction: 2021, condition: new, Empty weight: 1.625 kg Selling price: € 5.250, US$ 5.595 Bucket volume: 1.7 m^3 We manufacture high quality buckets with competitice prices We can set the cheap transportation everywhere. For detailed information please contact us. Lredpfsph Rmyjx Ahker

Condition: new, Year of construction: 2025, warranty duration: 12 months, cutting height (max.): 120 mm, cutting width (max.): 200 mm, power: 16 kW (21.75 HP), Equipment: rotational speed infinitely variable, Machine for processing components for modern log house construction with the perfect price-performance ratio for beginners, small productions, or as a supplement for special parts. Loading and positioning of the components is done manually – after starting the processing unit with the 2-hand buttons, the milling process runs automatically. Optional rolling tables and positioning stops are available for positioning the components. Ljdpfxownt Htj Ahkorr

Condition: used, The COVERTEK machining center is suitable for processing solid and glued wood beams. They are used for the construction of frames and roof structures. * Portal with mobile positioning trolleys; * Machining of 6 sides without rotation of the piece; * Dual 5-axis working unit with 12-position HSK-E63 tool holder; * N° 2 spindles of 17 kW each; * Data imported from CAD/CAM programs Technical specifications * Workpiece width: min. 100 mm - max. 600mm; * Workpiece thickness: min. 70 mm - max. 300mm; * Workpiece length: max. 13000mm; * Blade diameter: 640 mm; * Feed speed: max. 80 m/min.; Lrsdpfx Ahetz H Egokjr * Software type: TPA ALBATROS EDICAD; * Automatic centralized lubrication; * Liquid cooling of the spindle; * Certification CE; * Total connection: 70 kW TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE IN THE WAREHOUSE

Condition: used, SCM Tech 99L Machining center Transport dimensions: mm 4,800x 230 h. 260 weight 2800 kg Ledpotxdqcefx Ahkerr

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 506093, ITALMAC Pegaso 5 Axis Centar Lrodpjtrvmvofx Ahkjr