Turning head SK40 36 pieces

unbekannt Wellengrößen 30-125 mm

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, Cedpjdm Aghjfx Ab Tsrk grooved feeding bush, screw with shearing and mixing element

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: Crsdpfxong A R Sj Ab Tek - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,600 mm, Hersteller: ZAYER, Typ: 30 KCU 6000-AR Baujahr: 2013 Serien-Nr.: 77258 Cedpjw U E Unofx Ab Tork 5-Achs Verfahrwege (X/Y/Z) ca. 6000/3500/1600 mm, Werkzeugaufnahme SK50 2 heads: -45° Automatic Head -Direct Head 80-fach Werkzeugwechsler Steuerpult HEIDENHAIN iTNC 530 Späneförderband TECNIMETAL Kühlaggregat EURO COLD Aufspanntisch DEMMELER Kühlmittelanlage Sicherheitsabsperrung mit Lichtschranke LENZE

Condition: good (used), Year of construction: 2003, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 900 mm, spindle diameter: 152 mm, FPT MAR-X 3, 2003 CNC SELCA 4045 PLUS DIGITAL, Built 2003, CNC can be changed to Heidenhein 620. FPT TRT25. Rotary Table, 25 Ton. Two axis Head, 144 x 144. X, Column travel 14.000 mm Y, Headstock vertical travel 4.000 mm Z, Ram stroke 1.500 mm W, Spindle Ø 152,4 mm 900 mm Spindle taper ISO 50 Spindle speed 0 - 2.500 rpm Spindle motor 48 kW Automatic tool changer 40 Tools FPT TRT25. Rotary Table, 360.000° 2.500 x 2.500 mm Rotary Table longitudinal travel 2.000 mm Crsdpfx Abjwdm A Ho Tsk Table load 25 Ton

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min Credjrw Dknspfx Ab Tsk tool magazin: 60 tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: good (used), The scope of delivery includes: Crsdpfxem E I Nvs Ab Tsk 01x back wall grille, used material color: cream white total width: approx. 2.200 mm total height: approx. 1.200 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm weight/pc.: approx. 8,14 kg Internal designation: RW-2

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Crodpeqx Sxlsfx Ab Tek

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Codol Dvx Ejpfx Ab Tjrk Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: excellent (used), Year of construction: 2013, turning height: 2,150 mm, turning diameter: 2,000 mm, Swing diameter 2,000 mm, turning height 2,150 mm, X-axis 1,150 mm, rotary table diameter 1,800 mm, chip conveyor, 25-position tool changer, fleece filter cleaning system, Csdpfx Absw Edvyo Tjrk

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Codpfewg Hrgjx Ab Tjrk Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t