Screw jack 2 pieces

unbekannt 100-145 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 Podpfxjxgnz Te Ah Hegg - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: - Jaw design stepped jaws - Jaw width 125 mm Pgsdpjrwmkajfx Ah Heg - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN - Total height 140 mm - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Psdpfxjikqz Sj Ah Hsgg Spindle motor 11 HP Weight 9000 kg

Condition: used, Year of construction: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Spindle stroke: 350 mm Min./max. overhang from the surface of the casing to the spindle axis: 1170/2070 mm Min./max. radius at the extreme positions of the spindle: 1370/2270 mm Min./max. distance of the spindle head in the vertical position (with the spindle retracted) from the floor: 305/1555 mm Min./max. distance of the spindle axis in the horizontal position from the floor: 295/2725 mm Vertical adjustment of the arms (stroke): 1250 mm Horizontal adjustment of the arms (travel): 900 mm Arm rotation: 360° Headstock rotation: 360° Headstock rotation from the horizontal position up/down: 90° / 90° Slide travel along the bed (extended): 2500 mm Shell diameter: 400 mm Pedpfxjvwbccj Ah Hogg

Condition: excellent (used), Year of construction: 2016, operating hours: 10,500 h, DMG Mori DMC850 V Siemens Control Operating Hours: Automatic Mode: 10,500 hours Condition: Very good condition, regularly serviced and continuously maintained! Capacity & Working Area X-axis: 850 mm Y-axis: 520 mm Z-axis: 475 mm Table Dimensions 1000 x 570 mm Main Spindle Max. speed: 14,000 rpm SK40 taper 30 tools Max. tool length: 300 mm Feed Axes Rapid traverse (X / Z): 36 m/min Feed rate: 36,000 mm/min Weight: 6,700 kg (without chip conveyor and coolant) Chip Management Chip conveyor Psdpfowzk Sajx Ah Hsgg Coolant pump General Specification: 30 tools Measuring probe

Condition: good (used), Year of construction: 2003, Good condition,live tools, measuring arm. Parts shown by hand not come. Technical details shown on pictures. Psdpfx Ahowybg So Hsgg

Year of construction: 1980, condition: good (used), Lid FP1 active milling machine with 3 axis HEIDENHAIN digital display, angle table. SK 40 spindle carrier. Good operational condition upon request under current demonstration ready. Peded Id N Rjpfx Ah Hjgg

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm distance between columns:2100 mm column arm:100 mm table width:300 mm number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t Podpfscxxrajx Ah Hogg

Condition: good (used), working width: 1040 mm metal sheet thickness: 1,25 mm upper roller-Ø: 56 mm below roller-Ø: 56 mm weight: 190 kg Pjdpfx Aedt Dqwoh Hsgg space needed: 1450 x 460 x 1030 mm

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm Pgjdpfxsb N Erbo Ah Hjg power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg