Faceplate

UNBEKANNT Ø1550mm

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm Njdpfjthuzpox Ab Aedc - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: good (used), Hook type shotblasting machine 1800x2500 with motorised hook with crane SIRSI Type: Hook type Max. diameter of workpiece: 1800 mm Max. height of workpiece: 2500 mm Max. workpiece weight: 3.000 kg Machine hoist capacity: 1x 3.000 Kg Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 3x 7,5kW Max. turbine flow: Ndedpfx Abjwrxczj Ajc Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm Ndedpfxsd Ha Hmj Ab Aec blade shaft Ø: 165 mm speed: max. 150 m/min

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 line wire diameter: 1,6-2,8 mm Ndodpfxex Ea E Ij Ab Asc point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Ndedpfoxmd U Aex Ab Ajc Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: new, functionality: fully functional, turning diameter over cross slide: 438 mm, spindle bore: 85 mm, turning diameter over bed slide: 660 mm, center height: 330 mm, turning length: 1,500 mm, quill stroke: 165 mm, quill diameter: 85 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, bed width: 400 mm, quill mount: MK 5, Equipment: rotational speed infinitely variable, Tip height: 330 mm Center distance: 1500 mm Spindle bore: 85 mm Njdpfx Abjm E Umij Aedc Spindle nose according to DIN 55029: Camlock D8 Gear stages: 12 Spindle speed range: 15-1500 rpm Drive power: 11 kW Weight approx. 2135 kg Features and more: Each gear stage is infinitely variable from 50% to 100% Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Nsdpsy Nfz Sefx Ab Aedc Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -50 / 950 mmDistance between columns: 2500 mm Milling head Milling head: 2 axis continuous head C5ETool clamping system: HydraulicTaper nose: ISO-50 (DIN 69871)   /   Pull stud: (DIN69872)Speed range: 4000 rpmSpindle power: 37 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10923 x 6170 x 5250 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: HR-410Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: AC, inner dimension width: 1,800 mm, inner dimension length: 2,300 mm, inner dimension height: 2,500 mm, Equipment: crane, lighting, Shot blasting and painting line. Ndodpfjygnm Dox Ab Aec Possible to come and see in testing.

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Ndsdpfjwl Iw Usx Ab Asc

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. Ndedpjvkuausfx Ab Aoc For further information see data sheets.