Faceplate

unbekannt Ø 2300 mm

Condition: good (used), Flexible extraction arm for welding smoke filter, welding smoke extraction Ppodpfevck Hzjx Aalsl -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg

Condition: used, Year of construction: 1982, grinding length:500 mm grinding width:225 mm Pjdecxxtmepfx Aalopl workpiece height:400 mm total power requirement:5,5 kW weight of the machine ca.:3,4 t NC81 NC-control, table belt drive 100-25000 mm/min., automatic feed, electronic dressing unit 020 NC-K with RPM-compensation, coolant pump, emergency cut-off

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost • Live center • Coolant pump Podpfx Aajwudhuelspl • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Pedpfx Aaefrlndslopl Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m Ppsdpfxsvpaa Ro Aalsl

Condition: new, Optimum OPTImill MZ 2S tool milling machine With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable from the control panel. Versatile application range Excellent damping characteristics and stability of the machine frame All guideways hardened and precision ground and adjustable by means of taper bars Automatic feed in X, Y and Z axes, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, large dimensioned and precisely surface machined with 5 T-slots Coolant device Large dimensioned handwheels with scale Machine lamp Quiet running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm width/depth (product) approx. 1168mm Height (product) approx. 1900mm weight (net) approx. 1400kg Drilling-milling head milling head swivel range ± 90 Drilling-milling capacity cutter head size max. 100mm drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Power drive motor 2,2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm distance vertical spindle - horizontal milling table min. 75mm distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots number 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table load max. 285kg Milling table vertical Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots number 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel Travel X-axis manual 400mm Travel Y-axis manual 200mm travel Z-axis manual 335mm Travel X-axis automatic approx. 310mm Travel Y-axis automaticapprox. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat 100mm Vertical spindle Spindle mounting ISO 40 DIN 2080 Vertical spindle speed range 50 - 1890min¯¹ Vertical spindle number of speed ranges 12steps Vertical spindle tightening rod M 16 Vertical spindle quill stroke 120mm Vertical spindle load max. 1100Nm Feed speed Feed speed X-axis 10 - 600mm/min feed speed Y-axis 10 - 600mm/min feed speed Z-axis 10 - 600mm/min Electrical connection Total connected load 4kW Motor(s) rapid traverse X-axis power drive motor 0,375kW rapid traverse Y-axis power drive motor 0,375kW Rapid traverse Z-axis power drive motor 0.375kW SCOPE OF SUPPLY: Adapter ISO 40/MK3 Ppedpfx Aasfnh Sgjlel adapter MK1 and MK 2 Milling spindle horizontal milling Ø 27 mm Operating tool

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm weight: 0,9 t 2 grinding wheels with flange 8 collets 1 coolant tank Ppodpfscq Rv Uox Aalsl mechanical feed with fixed stop The cardan shaft for the workpiece drive is worn out

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as in the photos: Psdpfx Aajv Epigslspl 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Year of construction: 1987, condition: used, Kehren rotary table type RS 7C, second-hand manufacturer: Kehren, Honneff Comm.: 4179 year of construction: 1987 Control: Siemens 3G SPS: Siemens S5 grinding motor: BBC QUB 200 rotary table ø: 750 mm ø grinding head:460 mm Control panel with screen Coolant system Flushing pump Podpohgmwgofx Aaljpl Coolant pump Automatic paper belt filter system Control cabinet

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm ø hole table 39 mm ø table External centering Ø139,75 power tool motor (b) 4 Cv high 1.800 mm long 1.450 mm Ppodpfxjgq Dgdj Aalsl weight 2.450 Kg width 1.000 mm