Bolster plate - Plate field

UNBEKANNT / UNKNOWN AP 1500x1250x250

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Kjdpfx Ajy Icbaopmjna

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Knodey E S D Ejpfx Apmja

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Kjdpfsu Sblwsx Apmsna Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Ksdpfsyy Nx Njx Apmjna Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: used, Year of construction: 1996, Technical details: Kjdpfxju Ngyzj Apmona grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. *

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm Ksdpfxstv Iklo Apmona throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm Knjdpfx Asrl Irvspmsa - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min Knedpjzdkz Djfx Apmoa face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine approx.LxWxH: 8,3 x 2,0 x 1,90 m The machine is equipped with: Digital Readout (DRO) 4-position tool post Tailstock Rapid traverse Lead screw and feed rod Heavy-duty machine bed Conventional design *

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, With 3-axis digital display Year of manufacture: 2015 Spindle bore: 54 mm Distance between centers: 1000 mm Center height: 200 mm Kedpfx Aoyybxnepmona Speed range: 30 – 3000 rpm, stepless speed control with display on screen Including the following accessories: Multifix tool holder Coolant system Three-jaw chuck Ø 200 mm Four-jaw chuck Ø 250 mm Collet chuck complete with collets up to Ø 32 mm Chuck guard Chip guard with lighting Fixed steady rest Ø approx. 150 mm Travelling steady rest Ø approx. 100 mm 4 pcs. height-adjustable machine feet 1 pc. live center Operating manual

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm Ksdpfx Apjwwl I Iomena workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago