Cnc-processing center

unbegrenztMASTERWOOD Projekt TF 100

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 Nwsdov Sv Enjpfx Ahvsd For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Nwodpfox Swf Uex Ahvjd Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Njdpfjxrahcex Ahvowd Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Frequency: 50 Hz Nwjdpfetr A Evsx Ahvod Weight: 3200 kg Number of axles: 3

Condition: used, machine/vehicle number: 008147, Max. panel width: 1100 mm Max. panel length: 2500 mm Length of conveyor: 8100 mm Panel return for edgebander: Right Nwsdpexqm Hisfx Ahvod

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Morbidelli P 200 Year 2019 ca 4 500 working hours 100% fully working condition , nice and clean machine. Still standing on it original please since first installation in 2019 here in Norway. Operated only by one operator since new in 2019. For all technical specification please read - clic on including pdf document. (at the end of this adversating, click download this document) Nwodpfowuubfox Ahvsd Machine can be seen after an appointment . The machine will be disconnected in end of February 2026. You are very welcome. Rekman Maskin & Service - Service of cnc machines since 1986 -

Condition: excellent (used), Year of construction: 2017, CNC-controlled precision machining center Gannomat Type Protec 571 CNC • For drilling, grooving, and milling Machining unit with PowerBlock featuring 21 spindles and 1 grooving saw: • Vertical drilling spindles: 13 • Horizontal drilling spindles in Y: 6 • Horizontal drilling spindles in X: 2 • Grooving unit in Y: 1 • Milling unit Profit: 4.5 kW, 3000 - 18,000 rpm with frequency converter • Workpiece width (X): min. 85 mm / max. 1000 mm • Workpiece thickness (Z): min. 6 mm / max. 60 mm • Workpiece length (Y): min. 285 mm in throughfeed mode / max. 5600 mm programmable workpiece length in software • Workpiece weight: max. 70 kg Processing speeds per axis: • On X-axis: max. 90 m/min Nwedpfswvk Ausx Ahvsd • On Y-axis: max. 30 m/min • On Z-axis: max. 15 m/min

Condition: good (used), Code: 0190 Brand: MASTERWOOD Model: PROJECT TF 100 - CE Standard CNC point to point throughfeed boring machine for panels, furniture, custom-made furniture, kitchens, bathroom furniture, carpentries and various - CE Standard Features: Robust clamping device for panel translation running on linear guides with preloaded ball bearings and moving by means of ball screw with high precision and stiffness. Brushless motor Working table: table with idle rubber wheels for panels in and outfeed . Panel movement on air film to avoid any scratching of panels with delicate surfaces . Panel pusher for smooth and accurate movement. Longitudinal sinking reference stop. Automatic reading of panel length Operating unit: boring head with vertical and horizontal spindles plus grooving saw unit. Centralised chips suction outlet Numeric control with PC: Windows operating system - network connection MASTERWORK software: Masterwood system for automatic drawing and programming - Boring, cutting programming with boring cycle optimisation Technical data: X-Y-Z axis strokes mm 1670-1330-87 Max displacement speed of X-Y-Z axis mt/min 25-50-25 Working range: width min/max mm 80/1000 - Length min mm 250 - Lenght max unlimited - Thickness min/max mm 10/60 Drilling head: n° 5 X axis independent vertical spindles - n° 5 Y axis independent vertical spindles - n° 2 X axis double horizontal spindles - n° 1 Y axis double horizontal spindle Spindles pitch 32 mm Motor power 1,7 Kw Spindles revolution speed 4000 rpm Sawing unit - Motore Kw 1,7 - Blade diameter mm 125 - 4000 rpm Nwsdpfew Emgbsx Ahved Working air pressure 7/8 bar Overall dimensions mm 2400 x 1990 x 1600 h Weight kg 1300

Condition: ready for operation (used), Year of construction: 2016, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Nsdsyrniijpfx Ahvewd Year of manufacture: 2016

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Empty weight: 1.240 kg Njdpfx Ajxhchdehvjwd - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets