Cylindrical Grinding Machine

Toyoda GL32M-63

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Kjdpfx Ajd Amgkjhvsww Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm Kwsdovzhf Sspfx Ahvew gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: used, Year of construction: 2014, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 500 mm max. width of grinding wheel: 500 mm weight of the machine ca.: 16 t. dimensions of the machine ca.: 12 x 10 x 8 m. grinding wheel diam. min/max.: 420-610 grinding wheel diameter - width-internal grin: 304,8 x 500 mm Regulatin wheel diameter min/max.: 300-350 mm Kwedpfjt Uw Avsx Ahvjw The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. *

Condition: like new (used), Specifications Manufacturer GLEASON Model 104 Condition Used Serial Number 631406 Stock Number DCN1749 Max working diameter 432 mm Module max 8,5 Description Equipped with change gears Kedpfx Aextpk Aehveww books

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Specifications Maximum longitudinal travel: 1500 mm Grinding diameter: 298 mm External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 × 2400 × 1600 mm Weight: 4800 kg Operating hours: — Power-on hours: — Condition: Rebuilt Compliant with local standards: — Kodpfxsw T Ti Dj Ahveww Status: Under power Technical features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table displacement [mm/rev]: 10 - Table speed range [mm/s]: 0.01–5 - Smallest table stroke [mm]: 3 - Wheelhead swivel [°]: ±90 - Centre sleeve taper [Morse No.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32–500 - Grinding wheel drive motor power [kW]: 5.5 - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 - Grinding attachment drive motor power [kW]: 0.75 - Machine dimensions [mm]: L=5400 / W=2400 / H=1580 / Machine weight [kg]: 4800

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Kwsdpfoinh Rqox Ahvsw Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Kwedpjkh Niqjfx Ahvsw Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Description: Mitutoyo Manufacturer: Mitutoyo Type: CV-500 Ksdpfjtxyv Isx Ahvoww The Contracer is complete with PC, software, monitor and vice.

Condition: new, Year of construction: 2026, functionality: fully functional, A sandblaster connected to a compressor is an ideal solution for quick, accurate and effective cleaning of various surfaces, eg removing rust, paint, sludge from metal surfaces, such as: automotive parts, engines, fittings, casings, wheels, rims, hinges, etc. As abrasive can be used, among others: sand made of plastic, corundum, quartz, glass, etc. The sandblaster we propose is very well equipped and prepared for work. Machine description The machine is equipped with a proven control system, a solid and roomy chamber with side doors, a solid sandblasting gun, four ceramic nozzles, high-quality work gloves, workspace lighting, a large window - a viewfinder (without a blind spot). The recommended device is provided in addition to a compact construction and a large and spacious workspace, ease of use, reliability and work safety. Dust-free operation of the device is ensured by the use of perimeter gaskets, which allows you to perform work in an environmentally friendly way. The blasting hose was placed in the bottom of the collecting container. The drain hole allows a quick change of material for sandblasting. The advantages of our sandblaster model Complete for use Comfortable sandblasting gun with 4 interchangeable ceramic nozzles Large, stable side door with rubber perimeter gasket for safe and dust-free operation High-quality rubber gloves integrated with the device Venting connection Efficient lighting of the working space 4 pieces of removable protective film for the window, viewfinder Sanding hose located in the bottom of the collecting container Adapted to work with various abrasives Kodpfxorh Erxj Ahveww The drain hole allows a quick change of material for sandblasting Ease of use, reliability and work safety Technical data Workspace dimension 840x550x370-550 mm Air consumption 400-700 L/min Required air pressure 2,75 - 5,5 BAR Arm hole opening 180 Air connection 1/4" Weight 49 kg We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 1999, condition: used, pulling force - max. 6,0 t Kwodpjd Il A Nofx Ahvjw max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m