Sweeper

Tennant S30 LPG

Condition: used, Year of construction: 2011, operating hours: 382 h, The Tennant S30 is the larger version of the S20, just a bit more capacity, but with the same familiar super clean results! Designed for reliable, industrial cleaning of indoor and outdoor surfaces. The S30 picks up all types of dirt, from fine sand to light dirt and on a variety of surfaces. The dust pick-up is excellent due to the filter system inside the machine so there is minimal dust generation during sweeping. The strong LPG engine ensures that the machine is always and everywhere deployable! The sweeper is completely prepared for you when you purchase the machine. So you get a machine entirely to your wishes and suitable for your application! Cedpfxsnyivte Ab Tork

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic Credeqprk Tepfx Ab Tjk - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Cjdpfx Abof Sqcks Terk Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Year of construction: 2014, condition: good (used), For sale is a Nilfisk compact safety industrial vacuum cleaner Cedpfohu Sf Hsx Ab Terk type CTS40 M Z22 400 C 4 kW 9 A 50 Hz 114 kg Ex-proof The vacuum cleaner is in good condition and ready for immediate use Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm Cjdpjk Nz N Esfx Ab Tsrk Max. working area: 1010 x 300 mm Piston stroke: 400 mm Advance speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Features: - Side-shifting cylinder - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Condition: good (used), Year of construction: 2010, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW Credpfx Ajgl Duzob Tok -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

Condition: used, operating hours: 2,572 h, The Tennant M30 increases productivity by delivering exceptional sweeping and scrubbing performance and also improves health and safety. Easy to operate and maintain, it quickly improves the image of your facility by cleaning in a single motion (wet or dry). It also cleans three times longer on one water tank using Tennant's innovative ec-H20 technology that uses up to 70% less water. This Tennant M30 comes standard with: - Complete service, - New battery pack, - Free on-site delivery, - New wear parts and rubbers, - Service and overhaul, Crodsnyiv Nopfx Ab Tek - Explanation and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. Other specifications: - Type: Sweeper-Scrubber, - Condition: Occasion, - Brand: Tennant, - Model: M30, - Sit up or walk behind: Sit down, - Theoretical capacity: 15,860 m²/h, - Side brush diameter: 53 cm, - Scrubbing width: 157 cm, - Mopping width: 150 cm, - Number of brushes (scrub): 2, - Brush type: Cylindrical, - Scrub brush diameter: 30.5 x 122 cm, - Brush pressure (scrub): 193 kg, - Dumpster capacity: 198 liters, - Clean water tank capacity: 284 liters, - Dirty water tank capacity: 360 liters, - Power source: Battery 36V, - Dirt tank emptying: High discharge system, - Maximum dumping height: 152 cm, - Filter area: 7.3 m², - Filter type: Panel filter, - Maximum speed: 13 km/h, - Maximum slope angle: 10%, - Drive: rear wheel, - Filter shaker: Electric, - Weight (excl. batteries): 1,815 kg, - Weight (incl. batteries): 2,449 kg, - Dimensions (LxWxH): 274 x 162 x 147 cm, - Stock: In stock, - Working hours: 2,572 hours, In addition, you can contact Metech for all machine maintenance and reorder cleaning supplies. In addition to this used Tennant M30, we also have new sweeper-scrubbers and used machines available. View our sweeper-scrubbers for more information. Would you like to know more about this Tennant M30? Contact us, we are pleased to tell you all about it.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,452 h, functionality: fully functional, cutting height (max.): 120 mm, main saw diameter: 380 mm, cutting depth: 340 mm, Raimann KR 310 E 340/120 multi-saw with movable disc - manufactured in Germany - year of manufacture 1990 - DTR - number of hours 4452 h TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - cutting height with movable disc 85 mm - engine power 30 kW - minimum length of the element 700 mm - width of table 740 mm - feed regulated on inverter 6-48 m/min - three rows of pawls Crjdpfxsrhig Ej Ab Tok - possibility to mount a bush - sleeve diameter 80 mm - length of fixed sleeve 190 mm - electrical adjustment of cutting height - electrical adjustment of shaft height - four top pressure rollers - automatic central lubrication - laser - ruler - spigot diameter 250 mm Overall dimensions of the machine 250x200x220 cm weight 2000 kg

Condition: new, Year of construction: 2024, SCHORR ride-on sweeper Electric sweeper Street sweeper Floor sweeper Powerful and smooth-running sweeper for indoor and outdoor use. With switchable spray nozzle. The ride-on sweeper offers a convenient and efficient solution for floor cleaning. The ergonomic seat and intuitive controls enable effortless operation, even over long periods of time. The powerful motor ensures thorough cleaning even in demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of convenience and efficiency makes floor cleaning a stress-free and enjoyable task. The LED work lights fitted as standard make it easier to work in darker areas. With an output of 1920 watts from 48V, the sweeper is equipped with enough power to get you comfortably to over 4 hours of continuous use. SCHORR RR80KM ride-on sweeper - Discover the advantages: -- Fully electric ride-on sweeper with 1250mm working width - ideal for large indoor and outdoor areas -- 48V/1920W power -- 80 liter bagless rear collection container, easy to extend and empty -- Powerful system with 48V and 58Ah -- With switchable spray nozzle for less dust turbulence -- Extremely easy to operate -- Outstanding maneuverability Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR80KM Drive: Seat Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Credpfeuac D Usx Ab Tsk Tires: PU (non-slip) Own weight: 400kg Basic dimensions Collecting tank volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Total length: 1600mm Total height: 1300mm Total width: 1250mm Sweeper width (without brush): approx. 80cm *Further technical data available on request. The chassis is made of flexible and robust plastic all round, which reduces potential damage to walls, for example. Apart from the side bristles, nothing protrudes beyond the cladding so that work can be carried out as closely as possible to objects. The collection container is made of sturdy steel and can be easily removed from the rear of the machine. Sensitive components such as the headlights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: excellent (used), Panel loading 15 beats per minute, complete with motorized roller conveyors Crsdpfx Ashv Sttjb Tsk Loader