Band Saw - Automatic - Horizontal

TCM Condor 270

Condition: used, Year of construction: 2005, Technical Data: Cutting capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest residual piece length: 35 mm Rjdsx Irx Ijpfx Ahvebw Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Infinitely variable cutting speed (frequency-controlled): 20 - 110 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part fully raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Features: - Infinitely variable cutting speed - Saw band guides made of carbide, replaceable - Hydraulic saw feed - Mechanical saw band tensioning - Machine light - Saw band cleaning via freely rotating, easily replaceable wire brush - Coolant supply via 1 coolant nozzle and 1 coolant hose, coolant tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Rbedpfx Ahjlxyhfsvow Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, Year of construction: 2000, cutting diameter 280 mm saw band length 4930 mm capacity 90 degrees: square 280 x 280 mm capacity 45 degrees: round 280 mm capacity 45 degrees: square 280 x 280 mm capacity 60 degrees: round 220 mm capacity 60 degrees: square 200 x 200 mm feed length 600 mm feed length: multiple 5400 mm cutting speed 17 - 90 m/min length of rest piece min/max min. 30 mm saw diameter min. 10 mm control KASTO, Compact Control total power requirement 5 kW weight of the machine ca. 1,75 t Rodjw En Efepfx Ahvjbw dimensions of machine L x W x H 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width; roller track 1350 mm length, 300 mm width

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Rjdjylw Stopfx Ahvjbw Technical Specification Taper Size SK 40

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm Rbodpfeu Dbvtjx Ahvow dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic Redpfxswkvq Hj Ahvjbw - Double miter - Material detection during lowering - incl. 7 saw blades

Condition: new, Year of construction: 2025, Dedusting system with pre-chamber separator specially developed for aggressive sandblasting dusts, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.16.B250 15,000m³ (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas compartment with filter cartridges and clean gas compartment with filter cleaning by means of compressed air, each with separate maintenance doors that are easy to open. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the 16 filter cartridges - cleaning. Technical data, approx. Rbodpfxert H Izj Ahvsw Type PF 1.16.B250 W x D x H 1.6 x 1.9 x 4.2m Air flow rate 15000 cbm/h Filter cartridges 16x 15,6m² Filter area 249.6 m² Filter medium PE fiber fleece Residual dust content 99.9%

Condition: used, Year of construction: 1992, machine/vehicle number: 150258, Offer 24348 Technical data: - Infinitely variable pressure capacity 15 t - Infinitely variable stroke 150 mm - Mandrel bending device up to 6000 mm - Mandrel bending angle 180 ° - Drive 400 V / 4 kW - Space requirement approx. W 1500 x H 1200 x D 1100 / 7500 mm - Weight approx. 1500 kg - Bending capacity - Bending capacity horizontal bending flat bars 120 x 10 mm - Tube bending ( pressing process ) up to approx. 11/2 " - Mandrel bending up to 42 mm - Bending tools - Tube bending tools Horizontal bending - Mandrel bending tools steel approx. 21.3 R 50 ; 26.9 R 57 ; 30 R 67 ; Rodpfx Asut Uiqohvebw - 33.7 R 72.5 ; 42.4 R 92.5 ; mm - Mandrel bending tools plastic approx. 10 R 60 ; 12 R 65 + 85 ; 17.2 R 100 - 28 R 65 ; 33.7 R 120 ; 36 R 100

Condition: good (used), Year of construction: 2007, 1 used band saw manufactured by Bauer type SA 320 year 2007 Technical data: Redpsttbf Rsfx Ahvebw Type Electrical connection 3 x 400 V / 50 Hz Motor power 3000 W Speed levels 2 Saw blade speeds 30- 120 m/min Saw blade dimensions 4150 x 34 x 1.1 mm Table height material feed 800 mm Cutting capacities Cutting capacity 0° round profile 320 mm Cutting capacity 0° round full 320 mm Cutting capacity 0° square material horizontal 320 x 320 mm Cutting capacity 0° square material upright Coolant pump

Condition: good (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 320 mm, cutting range round steel at 45°: 260 mm, stepless cutting speed hydraulic material clamping infeed automat coolant device roll conveyor manual swivable cutting frame for miter cuts Technische Daten: Schnittbereich rund 0° / cutting range round 0° 320 mm Schnittbereich vierkant 0° /cutting range square 0° 350x320 mm Schnittbereich rund 45° / cutting range round 45° 260 mm Schnittbereich vierkant 45° /cutting range square 45° 250x180 mm Schnittgeschwindigkeit / cutting speed 20-100 m/min. Sägebandlänge / dimensions of the saw band 3660x27x0,9 mm Antriebsleistung / drive capacity 3,9 kW Gewicht der Maschine ca. / weight 1825 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Rbedpfx Aewvi Agjhvsw