CNC lathe

Takamaz XYT-51

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder Cgodpfx Aoygxy Ujkcjt -Turning tools -Various tips -Technical documentation

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Clamping units Collet machine with main and sub spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 Clamping cylinder L/R spindle: stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. thread diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1-axis: 70.00 mm R spindle travel X2-axis: 180.00 mm R spindle travel Z2-axis: 238.00 mm Tool slide Tool slide: Vertical linear slide Number of tool positions: 16.00 Number of tool positions slide 1: 6/4 Tool shank size: 16.00 mm Internal holder tool: Ø 20.00 mm Travel X1-axis: 135.00 mm Travel Y1-axis: 260.00 mm Number of turning tools (L-spindle) X-/Y-unit: 2/2 (Use for L/R spindle) Z-unit: 2+2 Speed range: 100 ~ 4,000 rpm Turning tool motor: 0.5 kW / 0.5 kW Powered tools max. drill: 8.00 mm Turning tool motor max. drilling diameter: M6 Tool slide 2 Tool slide: Vertical linear slide Number of tool positions: 7.00 Cgsdpfxjwqz Hao Akcot Number of tool positions slide 2: 3/4 Tool shank size: 16.00 mm Internal holder tool: Ø 20.00 mm Travel Y2-axis: 215.00 mm Machine dimensions Machine height: 1,670.00 mm Floor space (WxD): 2,320 mm×1,335 mm Machine weight: 3,000.00 kg SCOPE OF SUPPLY Among others: (list not exhaustive): Miyano BX-26S CNC lathe (year of manufacture: 2008) Tool holder (see photo of machine interior) Fire extinguishing system Control for high frequency spindle High frequency spindle Chip conveyor Oil mist separator Exact scope of supply as per photo series No guarantee is given for the correctness, completeness and up-to-dateness of the information.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] Csdpsu E U Ufefx Akcogt - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip

Condition: like new (used), Year of construction: 2022, 3-Axis CNC Lathe Type: Puma GT 2600 LM Cgedpsywthvsfx Akcst Manufacturer: Doosan Year of manufacture: 2022 New Fanuc i Series Plus touch control 12-inch Samchully hydraulic chuck Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Spindle bore: 81 mm Spindle speed: 3500 rpm Turret: 12 positions BMT 55 Driven tool speed: 5000 rpm X: 265 mm Z: 1100 mm C: ±360° LNS chip conveyor Tool probe MT5 tailstock Including: 4 driven tool holders 2/2 8 standard tool holders Total: 12 pcs Documentation Machine as new, only 1,800 operating hours Available for inspection in our warehouse

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Cjdpfxjydaade Akcegt Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery Cgjdpfx Aewi Ty Ajkcet No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: used, Thread rolling machine ORT RP30U Cgsdpjt H Ty Uefx Akcot 2-roll 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Cedpferpn Dvsx Akcogt Technical details shown on picture.

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ PRESSURE 350t STROKE 350mm Cgodpfxsfmqqle Akcst TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Weight: 5.700 kgr

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Technical specifications: Camera system: 2 x 8,000,000 Csdpexr Umgofx Akcjgt Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…