Sunnen CK-21-CC

Sunnen CK-21-CC

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical data: - max. grinding length approx. 350 mm Gedpoklxwkefx Acweir - max. grinding width 150 mm - max. installation height with / without magnet 150 / 210 mm - grinding wheel stroke approx. 200 mm - clamping surface 300 x 160 mm - magnetic clamping plate 250 x 150 mm - grinding wheel dimension approx. 200 x 80 x 78 mm - grinding wheel speed 2800 rpm - swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - wet grinding device - drive 400 V / 1,85 kW - space requirement approx. W 850 x H 1650 x D 800 mm - weight approx. 350 kg

Condition: new, connected load frequency 230 V battery 24V / 100Ah Giedpfx Ajvu Hccocwjr Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: good (used), Year of construction: 2009, Machine will come with robot . Godpfxoxfu S Nj Acweir 42.000 rpm

Condition: excellent (used), Year of construction: 2022, CNC Surface, Profile, and Deep Grinding Machine ELB-Schliff smartLine BD15 KXT XC Control: Xpress Cube Year of manufacture: 2022 Grinding width: 600 mm Grinding length: 1,500 mm Grinding height: 500 mm Grinding wheel diameter: 400 mm Table load: 1,200 / 625 kg Spindle drive: 10 – 52 kW Spindle taper: 60 / 75 mm Giodpsyk Tb Usfx Acwer Speed range: 1,450 – 3,500 rpm Accessories: Belt filter system Coolant mist extraction system type VMN-V12 Balancing system Magnetic chuck

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] Gedpfex Av Adsx Acwsir - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale Godpfjd R Nv Isx Acwsir - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 160,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. Gsdpfxjxp Hq Ee Acwjir U-axis in excellent condition. Positioning is highly precise. C-axis for contour grinding is available and fully operational. Control: Fanuc O-M The machine is in daily use and continues to be highly accurate. Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.)

Condition: ready for operation (used), Year of construction: 2005, Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement. Gjdpfx Aoxyk S Iscwjir

Condition: new, Year of construction: 2024, SCHORR scrubber dryer 24V floor wiper scrubber 100Ah scrubbing machine Efficient floor cleaning combined with extremely easy handling. The scrubber dryer with a 100 Ah battery and a 51 cm brush diameter offers an impressive cleaning performance of up to 2500 m²/h, ideal for efficient cleaning of medium to large areas. With its robust construction and long-lasting battery life, it guarantees reliable cleaning even in demanding applications. With the 100Ah batteries installed, intensive continuous use of approx. 4 hours is possible. The batteries are conveniently charged with the supplied charger at a standard 230V socket. SCHORR scrubber dryer RR850FS - Discover the advantages: -- up to 2500m²/h cleaning performance -- 60 liter waste water tank -- 510mm brush diameter -- 24V 100Ah batteries -- Charger included -- Fully electric -- Ideal for warehouses and department stores -- Extremely robust and reliable Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR850FS Drive: Drive motor Suction motor power: 500W Brush motor power: 500W Operating time: approx. 4 hours Number of wheels: 2 Tires: PU (non-slip) Own weight: 250kg Basic dimensions Fresh water tank volume: 55l Dirty water tank volume: 60l Diameter of disk brushes: 510mm Godpfx Acouac Dnswsir Total length: 1400mm Total width: 850mm Total height: 1050mm *Further technical data available on request. The scrubber dryer has a user-friendly design and an intuitive user interface that is easy to understand, even for inexperienced users. With its ergonomic design and flexible maneuverability, it enables effortless navigation through tight spaces, ensuring efficient cleaning with minimal effort. The scrubber dryer has a 55 liter fresh water tank and 60 liter waste water tank. The great advantage of this ratio is that it is not possible to accidentally take in more water than can be discharged. This prevents overflowing, even if there is foaming in the tank. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Net machine weight: 8000 kg TECHNICAL SPECIFICATIONS Gsdpfow Uc Hnsx Acwjir Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Distance between lapping plates: < 390 mm Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Subject to errors or omissions; technical data is provided without guarantee.